Abstract
A nonlinear hysteretic beam model based on a geometrically exact planar beam theory combined with a continuum extension of the Bouc-Wen model of hysteresis is proposed to describe the memory-dependent dissipative response of short wire ropes which have the unique feature of exhibiting hysteretic energy dissipation due to the interwire friction. With the proposed model, hysteresis is introduced in the constitutive equation between the bending moment and the curvature within the special Cosserat theory of shearable beams. The model is indeed capable of describing the hysteretic behavior exhibited by short steel wire ropes subject to flexural cycles. The model parameters which best fit a series of experimental measurements for selected wire ropes are identified employing the Particle Swarm Optimization method . The identified parameters are used to reproduce other experimental tests on the same wire ropes obtaining a good accuracy.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Baber, T., Noori, M.: Random vibration of degrading, pinching systems. J. Eng. Mech. 111(8), 1010–1026 (1985)
Baber, T., Wen, Y.: Random vibration hysteretic, degrading systems. J. Eng. Mech. Div. 107(6), 1069–1087 (1981)
Bouc, R.: Forced vibration of mechanical systems with hysteresis. In: Proceedings of the Fourth Conference on Non-linear oscillation, Prague, Czechoslovakia (1967)
Carboni, B., Lacarbonara, W.: A new vibration absorber based on the hysteresis of multi-configuration nitinol-steel wire ropes assemblies. In: MATEC Web of Conferences, vol. 16, p. 01004. EDP Sciences (2014)
Carboni, B., Lacarbonara, W., Auricchio, F.: Hysteresis of multiconfiguration assemblies of nitinol and steel strands: experiments and phenomenological identification. J. Eng. Mech. 141, 04014135 (2014)
Carpineto, N., Lacarbonara, W., Vestroni, F.: Hysteretic tuned mass dampers for structural vibration mitigation. J. Sound Vib. 333(5), 1302–1318 (2014)
Casciati, F.: Stochastic dynamics of hysteretic media. Struct. Saf. 6(2), 259–269 (1989)
Charalampakis, A., Dimou, C.: Identification of bouc-wen hysteretic systems using particle swarm optimization. Comput. Struct. 88(21), 1197–1205 (2010)
Costello, G.: Theory of Wire Rope. Springer, New York (1990)
Crawley, E.F., ODonnell, K.J.: Identification of nonlinear system parameters in joints using the force-state map** technique. AIAA Pap 86(1013), 659–667 (1986)
Demetriades, G., Constantinou, M., Reinhorn, A.: Study of wire rope systems for seismic protection of equipment in buildings. Eng. Struct. 15(5), 321–334 (1993)
Dimou, C., Koumousis, V.: Reliability-based optimal design of truss structures using particle swarm optimization. J. Comput. Civil Eng. 23(2), 100–109 (2009)
Eberhart, R.C., Shi, Y.: Particle swarm optimization: developments, applications and resources. In: Proceedings of the 2001 Congress on Evolutionary Computation, 2001, vol. 1, pp. 81–86. IEEE (2001)
Fourie, P., Groenwold, A.: The particle swarm optimization algorithm in size and shape optimization. Struct. Multi. Optim. 23(4), 259–267 (2002)
Fourie, P., Groenwold, A.A.: Particle swarms in topology optimization. In: Proceedings of the Fourth World Congress of Structural and Multidisciplinary Optimization, Dalian, China (2001)
Gerges, R.: Model for the force-displacement relationship of wire rope springs. J. Aerosp. Eng. 21(1), 1–9 (2008)
Gerges, R., Vickery, B.: Parametric experimental study of wire rope spring tuned mass dampers. J. Wind Engi. Ind. Aerodyn. 91(12), 1363–1385 (2003)
Gerges, R., Vickery, B.: Optimum design of pendulum-type tuned mass dampers. Struct. Des. Tall Spec. Build. 14(4), 353–368 (2005)
Gholizadeh, S., Salajegheh, E.: Optimal design of structures subjected to time history loading by swarm intelligence and an advanced metamodel. Comput. Methods Appl. Mech. Eng. 198(37), 2936–2949 (2009)
Gnanavel, B., Gopinath, D., Parthasarathy, N.: Effect of friction on coupled contact in a twisted wire cable. J. Appl. Mech. 77(2), 024501 (2010)
Gnanavel, B., Parthasarathy, N.: Effect of interfacial contact forces in radial contact wire strand. Arch. Appl. Mech. 81(3), 303–317 (2011)
Kennedy, J., Eberhart, R.: Particle swarm optimization. In: Proceedings of IEEE International Conference of Neural Network IV, Perth, Australia
Kwok, N., Ha, Q., Nguyen, T., Li, J., Samali, B.: A novel hysteretic model for magnetorheological fluid dampers and parameter identification using particle swarm optimization. Sens. Actuators A: Phys. 132(2), 441–451 (2006)
Lacarbonara, W.: Nonlinear Structural Mechanics: Theory, Dynamical Phenomena and Modeling. Springer, New York (2013)
Liu, B., Wang, L., **, Y.H., Tang, F., Huang, D.X.: Directing orbits of chaotic systems by particle swarm optimization. Chaos, Solitons Fractals 29(2), 454–461 (2006)
Love, A.E.H.: A Treatise on the Mathematical Theory of Elasticity. Cambridge University Press, Cambridge (2013)
Ma, J., Ge, S.R., Zhang, D.K.: Distribution of wire deformation within strands of wire ropes. J. China Univ. Min. Technol. 18(3), 475–478 (2008)
Masri, S., Caughey, T.: A nonparametric identification technique for nonlinear dynamic problems. J. Appl. Mech. 46(2), 433–447 (1979)
Multiphysics, C.: Version 3.5 a (2008)
Nucera, C., di Scalea, F.L.: Monitoring load levels in multi-wire strands by nonlinear ultrasonic waves. Struct. Health Monit. 10(6), 617–629 (2011)
Quaranta, G., Monti, G., Marano, G.C.: Parameters identification of van der pol-duffing oscillators via particle swarm optimization and differential evolution. Mech. Syst. Sig. Process. 24(7), 2076–2095 (2010)
Sauter, D., Hagedorn, P.: On the hysteresis of wire cables in stockbridge dampers. Int. J. Nonlinear Mech. 37(8), 1453–1459 (2002)
Schutte, J., Groenwold, A.: Sizing design of truss structures using particle swarms. Struct. Multi. Optim. 25(4), 261–269 (2003)
Simeonov, V.K., Sivaselvan, M.V., Reinhorn, A.M.: Nonlinear analysis of structural frame systems by the state-space approach. Comput. Aided Civil Infrastruct. Eng. 15(2), 76–89 (2000)
Sivaselvan, M.V., Reinhorn, A.M.: Hysteretic models for deteriorating inelastic structures. J. Eng. Mech. 126(6), 633–640 (2000)
Stockbridge, G.: Vibration damper. US patent 1,675,391 (1928)
Tinker, M., Cutchins, M.: Dam** phenomena in a wire rope vibration isolation system. J. Sound Vib. 157(1), 7–18 (1992)
Triantafyllou, S., Koumousis, V.: Bouc-wen type hysteretic plane stress element. J. Eng. Mech. 138(3), 235–246 (2011)
Triantafyllou, S., Koumousis, V.: Small and large displacement dynamic analysis of frame structures based on hysteretic beam elements. J. Eng. Mech. 138(1), 36–49 (2011)
Triantafyllou, S.P., Koumousis, V.K.: An hysteretic quadrilateral plane stress element. Arch. Appl. Mech. 82(10–11), 1675–1687 (2012)
Venter, G., Sobieszczanski-Sobieski, J.: Multidisciplinary optimization of a transport aircraft wing using particle swarm optimization. Struct. Multi. Optim. 26(1–2), 121–131 (2004)
Version, M.: 7.10. 0.499 (r2010a) (2010)
Vestroni, F., Lacarbonara, W., Carpineto, N.: Hysteretic tuned mass damper for passive control of mechanical vibration. Sapienza University of Rome, Italian Patent No. RM2011A000434 (2011)
Waisman, H., Montoya, A., Betti, R., Noyan, I.: Load transfer and recovery length in parallel wires of suspension bridge cables. J. Eng. Mech. 137(4), 227–237 (2010)
Wen, Y.: Method for random vibration of hysteretic systems. J. Eng. Mech. Div. 102(2), 249–263 (1976)
Worden, K.: Data processing and experiment design for the restoring force surface method, part i: integration and differentiation of measured time data. Mech. Syst. Sig. Process. 4(4), 295–319 (1990)
Worden, K.: Data processing and experiment design for the restoring force surface method, part ii: choice of excitation signal. Mech. Syst. Sig. Process. 4(4), 321–344 (1990)
Ye, M.: Parameter identification of dynamical systems based on improved particle swarm optimization. In: Intelligent Control and Automation, pp. 351–360. Springer, Berlin (2006)
Acknowledgments
This work was partially supported by the Italian Ministry of Education, University and Scientific Research (2010-2011 PRIN Grant No. 2010BFXRHS-002) and by a FY 2013 Sapienza Grant N. C26A13JPY9.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this paper
Cite this paper
Carboni, B., Mancini, C., Lacarbonara, W. (2015). Hysteretic Beam Model for Steel Wire Ropes Hysteresis Identification. In: Belhaq, M. (eds) Structural Nonlinear Dynamics and Diagnosis. Springer Proceedings in Physics, vol 168. Springer, Cham. https://doi.org/10.1007/978-3-319-19851-4_13
Download citation
DOI: https://doi.org/10.1007/978-3-319-19851-4_13
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-19850-7
Online ISBN: 978-3-319-19851-4
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)