Abstract
Nematic liquid crystal elastomers (LCEs) are a unique class of network polymers with potential for excellent mechanical energy absorption and dissipation capacity due to their ability to change the nematic director under mechanical loading (sometimes called soft-elasticity) in addition to the viscoelastic behavior of the remaining polymer network. This additional inelastic mechanism makes them appealing as candidate dam** materials in a variety of applications from vibration to impact. The lattice structures made from the LCEs provide further mechanical energy absorption and dissipation capacity associated with packing out the porosity.
Understanding the extent of mechanical energy absorption versus dissipation depends on the mechanical stress-strain response under both loading and unloading. In the past, the loading-unloading stress-strain response was only obtained within quasi-static (slow) strain rates on standard material test frames. In this study, we used a newly developed bench-top linear actuator to characterize the loading-unloading compressive response of polydomain and monodomain LCE polymers and polydomain LCE lattice structures with two different porosities (nominally, 62% and 85%) at both low and intermediate strain rates at room temperature. As a reference material, a bisphenol A (BPA) polymer with a similar glass transition temperature (9 °C) as the nematic LCE (4 °C) was also characterized at the same conditions for comparing to the LCE polymers. Based on the loading-unloading stress-strain curves, the energy absorption and dissipation for each material at different strain rates (0.001, 0.1, 1, 10 and 90 s−1) were able to be calculated. The strain-rate effect on the mechanical response and energy absorption and dissipation behaviors was determined.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Giamberini, M., Ambrogi, V., Cerruti, P., Carfagna, C.: Viscoelasticity of main chain liquid crystalline elastomers. Polymer. 47, 4490–4496 (2006)
Jiang, H., Li, C., Huang, X.: Actuators based on liquid crystalline elastomer materials. Nanoscale. 5, 5225–5240 (2013)
Ula, S.W., Traugutt, N.A., Volpe, R.H., Patel, R.R., Yu, K., Yakacki, C.M.: Liquid crystal elastomers: an introduction and review of emerging technologies. Liq. Cryst. Rev. 6, 78–107 (2018)
Hussain, M., Jull, E.I.L., Mandle, R.J., Raistrick, T., Hine, P.J., Gleeson, H.F.: Liquid crystal elastomers for biological applications. Nano. 11, 813 (2021)
Annapooranan, R., Wang, Y., Cai, S.: Highly durable and tough liquid crystal elastomers. ACS Appl. Mater. Interfaces. 14, 2006–2014 (2022)
Liao, W., Yang, Z.: 3D printing programmable liquid crystal elastomer soft pneumatic actuators. Mater. Horiz. (2022). https://doi.org/10.1039/d2mh01001a
Mistry, D., Traugutt, N.A., Yu, K., Yakacki, C.M.: Processing and reprocessing liquid crystal elastomer actuators. J. Appl. Phys. 129, 130901 (2021)
Jeon, S.-Y., Shen, B., Traugutt, N.A., Zhu, Z., Fang, L., Yakacki, C.M., Nguyen, T.D., Kang, S.H.: Synergistic energy absorption mechanisms of architected liquid crystal elastomers. Adv. Mater. 34, 2200272 (2022)
Zhang, Z., Huo, Y.: Programmable mechanical energy absorption and dissipation of liquid crystal elastomers: modeling and simulations. Adv. Eng. Mater. 24, 2100590 (2022)
Traugutt, N.A., Mistry, D., Luo, C., Yu, K., Ge, Q., Yakacki, C.M.: Liquid-crystal-elastomer-based dissipative structures by digital light processing 3D printing. Adv. Mater. 32, 2000797 (2020)
Luo, C., Chung, C., Traugutt, N.A., Yakacki, C.M., Long, K.N., Yu, K.: 3D printing of liquid crystal elastomer foams for enhanced energy dissipation under mechanical insult. ACS Appl. Mater. Interfaces. 13, 12698–12708 (2021)
Mistry, D., Traugutt, N.A., Sanborn, B., Volpe, R.H., Chatham, L.S., Zhou, R., Song, B., Yu, K., Long, K.N., Yakacki, C.M.: Soft elasticity optimizes dissipation in 3D-printed liquid crystal elastomers. Nat. Commun. 12, 6677 (2021)
Azoug, A., Vasconcellos, V., Dooling, J., Saed, M., Yakacki, C.M., Nguyen, T.D.: Viscoelasticity of the polydomain-monodomain transition in main-chain liquid crystal elastomers. Polymer. 98, 165–171 (2016)
Martin Linares, C.P., Traugutt, N.A., Saed, M.O., Martin Linares, A., Yakacki, C.M., Nguyen, T.D.: The effect of alignment on the rate-dependent behavior of a main-chain liquid crystal elastomer. Soft Matter. 16, 8782–8798 (2020)
Song, B., Martinez, T., Landry, D., Aragon, P., Long, K.: Development of a bench-top intermediate-strain-rate (ISR) test apparatus for soft materials. J. Dyn. Behav. Mater. 9, 36–43 (2023) (online available)
Nie, X., Song, B., Loeffler, C.M.: A novel splitting-beam laser extensometer technique for Kolsky tension bar experiment. J. Dyn. Behav. Mater. 1, 70–74 (2015)
Acknowledgements
Sandia National Laboratories is a multimission laboratory managed and operated by National Technology and Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525. The views expressed in the article do not necessarily represent the views of the U.S. Department of Energy or the United States Government.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
Song, B. et al. (2024). Loading-Unloading Compressive Response and Energy Dissipation of Liquid Crystal Elastomers and Their 3D Printed Lattice Structures at Various Strain Rates. In: Kramer, S.L., et al. Additive and Advanced Manufacturing, Inverse Problem Methodologies and Machine Learning and Data Science, Volume 4. SEM 2023. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-031-50474-7_2
Download citation
DOI: https://doi.org/10.1007/978-3-031-50474-7_2
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-50473-0
Online ISBN: 978-3-031-50474-7
eBook Packages: EngineeringEngineering (R0)