Abstract
17-4 precipitation hardenable (PH) stainless steel is a commonly used alloy for a wide range of industrial applications, making it a valuable addition to the additive manufacturing (AM) sphere. In order to confidently use 17-4PH as an AM feedstock, its behavior must be understood under the wide range of thermal conditions and rapid solidification rates characteristic of AM processes. There have been many studies on the microstructure and properties of 17-4PH in laser powder bed applications, but most focus only on final heat-treated microstructure with little attention paid to the as-built microstructure [1–4]. There is very little published research on the microstructure of 17-4PH using plasma-based additive manufacturing methods. Clearly, a large gap still exists in the understanding of 17-4PH that must be addressed before AM parts built with 17-4PH can be used. This work begins to address this gap by observing the relationship between the microstructure, the thermal gradient, and the velocity of the solidification front to build the foundation for a process–structure–property relationship for this alloy.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Vunnam S, Saboo A, Sudbrack C, Starr TL (2019) Effect of powder chemical composition on the as-built microstructure of 17-4 PH stainless steel processed by selective laser melting. Add Man 30:1–12
Facchini L, Vicente N, Lonardelli I, Magalini E, Robotti P, Molinari A (2010) Metastable austenite in 17-4 precipitation-hardening stainless steel produced by selective laser melting. Adv Eng Mat 12(3):184–188
Garcia-Cabezon C, Castro-Sastre MA, Fernandex-Abia AI, Rodriguez-Mendez ML, Martin-Pedrosa F (2022) Microstructure-hardness-corrosion performance of 17-4 precipitation hardening stainless steel processed by selective laser melting in comparison with commercial alloy. Met Mat Int 28(11):2652–2667
Ozasoy A, Tureyen EB, Baskan M, Yasa E (2021) Microstructure and mechanical properties of hybrid additive manufactured dissimilar 17-4 PH and 316L stainless steels. Mat Today Com 28:1–9
Zimmerman M (1989) Rapid solidification of Al-Cu eutectic alloy by laser remelting. Acta Metall 37(12):3305–3313
Gramaud M (1990) Solidification Rapide: Etude Microstrcuturale des Alliages Al-Fe Apres Fusion Superficielle Par Laser. PhD Dissertation, Ecole Polytechnique Federale de Lausanne
Olson DL (1985) Prediction of austenitic weld metal microstructure and properties. Weld J 64(10):281-s–295-s
Cabellaero A, Ding J, Ganguly S, Williams S (2019) Wire + Arc additive manufacture of 17-4PH stainless steel: effect of different processing conditions on microstructure, hardness, and tensile strength. J Mat Proc Tech 268:54–62
Ziewiec A, Zielinska-Lipiec A, Tasak E (2014) Microstructure of welded joints of X5CrNiCuNb16-4 (17-4 PH) martensitic stainless steel after heat treatment. Arch Met Mat 59(3):965–970
Acknowledgments
The authors would like to acknowledge Syncrude, NSERC, and HI-AM without whose support this work would not have been possible.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
McDonald, A. et al. (2023). Microstructure Map of Rapidly Solidified 17-4PH Stainless Steel. In: Proceedings of the 62nd Conference of Metallurgists, COM 2023. COM 2023. Springer, Cham. https://doi.org/10.1007/978-3-031-38141-6_67
Download citation
DOI: https://doi.org/10.1007/978-3-031-38141-6_67
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-38140-9
Online ISBN: 978-3-031-38141-6
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)