Abstract
The paper proposes the principle for providing a guaranteed reliability of metal parts. This principle consists in manufacturing the parts with a guaranteed reliability. The research provided has established that each batch of metals and alloys (used to make the parts) shall be subject to preliminary studies and tests for defining the actual physical and mechanical properties with the confirmation of compliance with regulatory requirements. Such data are collected on the basis of the results of metallographic studies and tests of the part mechanical properties. We showed the results of metallographic and phase analysis of the source metals shall be used to calibrate non-destructive testing devices. Calibration operations are conducted to establish the codes corresponding to the number of flaws detected by the metallographic method in the sections of each equipment part. In this case, 2 codes can be obtained. One is used for a minimum permitted number of flaws that do not affect the guaranteed reliability and assigned a code “acceptable”. The code “not acceptable” is assigned to all other cross-section structures where the number of flaws exceeds the minimum permitted number of flaws in the cross-section structure of parts. The identification of parts with a guaranteed reliability is conducted with a probability of 0.97…0.99, and the guaranteed reliability of products is estimated with a probability of 0.95…0.96. These probabilities characterize methodological and metrological errors that are associated with the conventional measurement methods in the cross-section structure of agricultural equipment .
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Vyacheslavova, O., Parfenyeva, I., Levina, T., Klochkov, A.: Analysis of the data collection and processing system for assessing the actual reliability of domestic tractor exemplified by PJSC “Promtractor”. In: International Scientific-Practical Conference “Agriculture and Food Security: Technology, Innovation, Mar-kets, Human Resources” (FIES 2019). International Scientific-Practical Conference “Agriculture and Food Security: Technology, Innovation, Markets, Human Resources” (FIES 2019), p. 00190 (2020)
Bavykin, O., Levina, T., Matrosova, V., Klochkov, A., Enin, V.: Use of fractal analysis to evaluate the surface quality of agricultural machinery parts. International Scientific-Practical Conference “Agriculture and Food Security: Technology, Innovation, Markets, Human Resources” (FIES 2019). International Scientific-Practic al Conference “Agriculture and Food Security: Technology, Innovation, Markets, Human Resources” (FIES 2019), p. 00189 (2020)
Levina, T.A., Ryabchenko, P.A., Samsonov, I.V.: Improving operating conditions of asynchronous electric motors. Bulletin of the Council of Young Scientists of the Ryazan State Agrotechnological University named after P.A. Kostychev 1(10), 176–179 (2020)
Levina, T.A., Safonov, E.V.: To Man Hung. Analysis of methods and means for assessing quality of surface layer of products obtained by the SLM method from heat-resistant alloys. In: Prom-Engineering. Proceedings of the VIIth All-Russian Scientific and Technical Conference, Chelyabinsk, pp. 90–96 (2021)
Levina, T.A., Safonov, E.V., Hung, T.M. (2022). Analysis of Methods and Measuring Instruments Used for Super Alloy Products (Obtained by SLM-Method) Surface Layer Quality Evaluation. In: Radionov, A.A., Gasiyarov, V.R. (eds) Proceedings of the 7th International Conference on Industrial Engineering (ICIE 2021) ICIE 2021. Lecture Notes in Mechanical Engineering, pp. p 174–186. Springer, Cham (2022). https://doi.org/10.1007/978-3-030-85230-6_21
Klochkov, A. Ya., Levina, T.A.: Peculiarities of documenting quality management system in the corporation. In: Product Quality: Control, Management, Improvement, Planning Collection of Scientific Papers of the International Youth Scientific and Practical Conference, vol. 2, p 288–291 (2015)
Klochkov, A. Ya., Lunkina, T.G.: Methodology of metrological examination of technical documentation. Mir Izmereniy 3, 36–40 (2018)
Ershov, D.S., Levina, T.A., Savostikova, O.G., Noskova, V.E.: Digital Metrology: General Provisions. Moscow Polytech, Moscow (2022)
GOST 16504-81. The state system of testing products. Product test and quality inspection. General terms and definitions. Publishing House of Standards,Moscow (2004)
GOST R 56542–2015. Non-destructive testing. Classification of types and methods. STANDARTINFORM, Moscow (2015)
Klochkov, A. Ya.: From standard to infinity. Socio-Humanitarian Bull. 2(15), 102–105 (2015)
Nikiforov, A.D.: Quality management: a textbook for universities Drofa, p. 720 Moscow (2004)
Klepikov, V.V., Bodrov, A.N.: Mechanical Engineering Technology: Textbook -, 2nd edn., p. 864. FORUM, Moscow (2008)
Martyshkin, V.V.: Qualimetry of technical products: Monograph, p. 482. SibAK LLC, Novosibirsk (2020)
Klochkov, A. Ya., Levina, T.A.: Assessment and analysis of internal and external environmental factors affecting the quality management system of an integrated corporate structure. Bull. Tver State Univ. Ser. Econ. Manage. 2, 177–187 (2015)
Kovalenko, V.V., Klochkov, A. Ya., Levina, T.A.: Automation of the main functions of quality management systems. Sci. Educ. Sci. Ed. Bauman Moscow State Tech. Univ. 7, 107–114 (2016)
Salimova, T.A., Biryukova, L.I., Makolov, V.I., Levina, T.A.: Quality management systems of integrated corporate structures. Stand. Qual. 7, 58–62 (2016)
Krivozubova, E.V., Levina, T.A.: Automation of surface quality control. New materials, equipment and technologies in industry. In: Materials of the International Scientific and Technical Conference of Young Scientists, p. 161 (2019)
Klochkov, A. Ya., Baturkin, C.A., Baturkina, E. Yu., Korshunov, A.I.: Development and research of solid-phase synthesis processes of unalloyed and doped orderless semiconductors. Mater. Sci. 6, 15–16 (2015)
Glukhikh, T.A., Klochkov, A. Ya.: Science-based learning. In the world of scientific discoveries. Krasnoyarsk, no. 1(07) part 2, p 3 (2010)
Klochkov, A. Ya., Sokolov, A.S.: Methodological aspects of the history of science and technology. Socio-Humanitarian Bull. 1(8), 153–154 (2012)
Glukhikh, Y. aM.,, Ovchinnikov, V.V.: The influence of annealing modes on the mechanical properties of aluminum alloy sheets Al-2%Cu-2%Mn-2%Mg. In: Collection of Scientific Papers on the Outcomes of the International Scientific Forum “SCIENCE AND INNOVATION - MODERN CONCEPTS”, p 130–136. (Moscow, July 29, 2022) (2022)
Klochkov, A. Ya., Levina, T.A., Martyshkin, V.V., Glukhikh, Y. aM.: Differential method as one of the tools of functional analysis of agricultural technical systems. RGATU Bull. 14(4), 145–153 (2022)
Abramov, O.K., Klochkov, A. Ya., Safonov, P.V.: Errors of digital measuring instruments and smart measuring systems in the presence of noise and interference. RGRTU Bull. 35, 47–54 (2011)
Abramov, O.K., Klochkov, A. Ya., Fatkin, V.A.: Fundamentals of Legal Metrology of the Russian Federation Textbook, p. 112 RGRTU, Ryazan (2011)
Abramov, O.K., Klochkov, A. Ya.: Natural limits of measurement accuracy and improvement of the reference base: textbook, p. 89. RGRTU, Ryazan (2009)
Kudryavtsev, A.S., Klochkov, A. Ya.: Statistical methods of quality managemen. RGRTU. Methodological guidelines, p. 65 Ryazan (2006)
Skoropletov, P.V., Klochkov, A. Ya.: Application of a differential ferroprobe in magnetically sensitive search devices. Bull. Rus. State Tech. Univ. 22, 38–41 (2007)
Kashirin, D.E., Kashirin, D.E., Pavlov, V.V., Glukhikh, Y.M.: Methodology for the study of harmonic voltage distortions on transformer substation buses. In: Materials of the Scientific and Practical Conference in Honor of Professor N.V. Byshova. RGATU, Ryazan, pp. 109–114 (2022)
Kashirin, D.E., Pavlov, V.V., Glukhikh, Y.M.: Phenomenological model of oscillation dissipation in a system with nonlinear energy losses. In: Materials of the Scientific and Practical Conference in Honor of Professor N.V. Byshova. RGATU, Ryazan, pp. 100–102 (2022)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Martyshkin, V.V., Adylina, A.P., Chestnyh, A.R., Klochkov, A.Y., Kashirin, D.E. (2023). Principles of Guaranteed Reliability Provision for Agricultural Equipment. In: Radionov, A.A., Gasiyarov, V.R. (eds) Proceedings of the 9th International Conference on Industrial Engineering. ICIE 2023. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-38126-3_43
Download citation
DOI: https://doi.org/10.1007/978-3-031-38126-3_43
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-38125-6
Online ISBN: 978-3-031-38126-3
eBook Packages: EngineeringEngineering (R0)