Abstract
This paper shows the application of vulcanized rubber waste (crumb rubber and tire reclaim) in the formulations of general-purpose rubber compounds for production of waste container wheels. The comprehensive comparative studies were carried out for two types of rubber: rubber crumb and tire reclaim, with the standard rubber compound for production of waste container wheels. The addition of crumb made of moulding waste and tire reclaim into the product does not affect processing properties of the rubber compounds and does not change physical mechanical properties of the vulcanizates. These studies revealed that the rubber made of tire reclaim had high application properties: low cost as compared to the samples made of virgin rubber, lower time and energy consumption during the production of end products, high ageing resistance, and higher oxidation stability. Usage of rubber products made of tire reclaim will decrease social, economic, and environmental negative effects of the underdevelopment of municipal solid waste recycling.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Shafigullin, L.N., Romanova, N.V., Gabdrakhmanov, A.T., Korchagin, O.P., Agashkin, D.A.: Recycling components made of polyurethane foam. In: IOP Conference Series: Materials Science and Engineering, vol. 915, p. 012051 (2020). doi:https://doi.org/10.1088/1757-899X/915/012051
Shafigullin, L.N., Romanova, N.V., Sokolova, Y.A., Aloyan, R.M., Mirgasimov, I.I., Akulova, M.V.: Secondary processing of products from polyurethane foam. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstil’noi Promyshlennosti 6, 90–93 (2019)
Federal Law “On Production and Consumption Waste” (1998) N 89-FZ (last edition). http://www.consultant.ru/document/cons_doc_LAW_19109. Accessed 13 Jan 2022
The list of critical technologies of the Russian Federation (approved by the Decree of the President of the Russian Federation dated July 7, 2011 No. 899) (“Technologies for monitoring and predicting the state of the environment, preventing and eliminating its pollution”) (2011). http://www.kremlin.ru/acts/bank/33514. Accessed 01 Jan 2022
Shakhovets, S.E., Buzid, H., Bogdanov, V.V.: Low-cost regeneration of waste rubber and tire production. Rubber Rubber 2, 30–31 (2006)
Shakhovets, S.E., Shmaraev, O., Nikolaev, O.O., Bogdanov, V.V.: World practice of processing and using waste tires (overview). Bull. St. Petersburg State Technol. Inst. (Tech. Univ.) 7(33), 70–76 (2010)
Shakhovets, S.E., Kurlyand, S.K., Sirotinkin, N.V., Ryutkyanen, E.A.: On the state of macromolecular structure of treatment rubbers during tires operation and processing. Bull. St. Petersburg State Technol. Inst. (Tech. Univ.) 51(77), 39–41 (2019)
Shakhovets, S.E., Ovechko, A.N., Smirnov, B.L., Bogdanov, V.V.: Influence of the parameters of integrated mechanothermochemical reclaiming on the physicochemical properties of vulcanized rubbers. Russ. J. Appl. Chem. 81(4), 676–681 (2008)
Shakhovets, S.E., Smirnov, B.L., Bogdanov, V.V.: Thermochemical reclaiming of vulcanized rubbers under exposure to electromagnetic field. Russ. J. Appl. Chem. 81(3), 490–493 (2008)
https://shinakama.tatneft.ru/. Accessed 13 Feb 2022
https://www.auer-packaging.com/ru/ru. Accessed 03 Jan 2022
Shakhovets, S.E., Smirnov, B.L., Bogdanov, V.V.: Thermochemical regeneration of rubbers using an electromagnetic field. J. Appl. Chem. 81(3), 505–508 (2008)
https://www.auer-packaging.com/ru/ru. Accessed 05 Jan 2022
GOST R 56724–2015 (ISO 11357–3:2011) Plastics. Differential scanning calorimetry (DSC). Part 3. Determination of temperature and enthalpy of melting and crystallization (2016) Moscow, Standartinform Publ., p. 5. (In Russian)
GOST R 29127–91 (ISO 7111–87) Plastics. Thermogravity of polymers (1991) Moscow, Standartinform Publ., p. 5. (In Russian)
Mobile waste and recycling containers-Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices-Dimensions and design; German version EN 840–1:2020 (2020). https://www.gostinfo.ru/catalog/Details/?id=6528359. Accessed 14 Jan 2022
STO 2511–001–58146599–2004 “Rubber crumb” (standard of the Shinoecology Association)
Netzsch Thermokinetic Analysis. https://www.netzsch-thermal-analysis.com/ms/products-solutions/software/netzsch-advanced-software/thermokinetics/. Accessed 14 Jan 2022
Makarov, M.M.: Method for obtaining devulcanizate and dispersant for implementation of the method. Patent for invention RU 2,681,620 C1 (2014). 2 April 2018
GOST 263–75 (ST SEV 1198–78) Rubber. Method for determination of Shore A hardness (1989) Moscow, Standart Publ., p. 7 (1989). (In Russian)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Shafigullin, L.N., Romanova, N.V., Gabdrakhmanov, A.T., Shafigullina, G.R., Treshchev, A.A. (2023). Using Tire Reclaim for Production of Rubber Wheels of Waste Containers. In: Radionov, A.A., Gasiyarov, V.R. (eds) Proceedings of the 8th International Conference on Industrial Engineering. ICIE 2022. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-14125-6_17
Download citation
DOI: https://doi.org/10.1007/978-3-031-14125-6_17
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-14124-9
Online ISBN: 978-3-031-14125-6
eBook Packages: EngineeringEngineering (R0)