Abstract
Railway track performance is inherently variable along its length, even on straight plain line track. Current condition monitoring relies on snapshot train borne measurements of track geometry, which may be used to plan route level maintenance. Although this provides a global record of current track quality, it is difficult to infer the local condition of the trackbed and local mechanisms of deterioration that may be occurring. A more important indicator of local trackbed condition may be the trackbed support stiffness as seen by a train. The trackbed support stiffness influences the performance of the track and its variation could potentially be used to predict changes in longer term performance with trafficking by means of vehicle/track interaction models and settlement equations. Trackside measurements may be obtained using track mounted sensors such as accelerometers, geophones, deflectometers, high-speed video cameras or strain gauges. These may be interpreted to determine the trackbed support stiffness. However, many measurement locations are required to determine the variation in trackbed stiffness along a useful length of track. This requires a significant increase in the scale of typical trackside monitoring deployments, potentially generating large volumes of data and requiring a degree of automation for data processing. The availability of small, inexpensive, standalone micro-electromechanical systems (MEMS) accelerometers means that it is now practicable to instrument hundreds of sleeper-ends in a single deployment, covering far greater lengths of track than would be viable with more established and expensive trackside monitoring approaches. This paper shows how MEMS have been used to investigate the performance of longer sections of track. Data processing techniques are described, and insights into the actual variation of track system performance are discussed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
British Standards Institution (2006) BS EN 13848. Railway applications—track—track geometry quality. In: Part 2: measuring systems—track recording vehicles. London
Auersch L (2005) The excitation of ground vibration by rail traffic: theory of vehicle–track–soil interaction and measurements on high-speed lines. J Sound Vib 284(1–2):103–132. https://doi.org/10.1016/j.jsv.2004.06.017
Cui Y-J et al (2014) Investigation of interlayer soil behaviour by field monitoring. Transp Geotech 1(3):91–105. https://doi.org/10.1016/j.trgeo.2014.04.002
Le Pen L et al (2017) Behaviour of under sleeper pads at switches and crossings—field measurements. Proc Inst Mech Eng Part F J Rail Rapid Transit 232(4):1049–1063. https://doi.org/10.1177/0954409717707400
Mishra D et al (2014) An integrated approach to dynamic analysis of railroad track transitions behavior. Transp Geotech 1(4):188–200. https://doi.org/10.1016/j.trgeo.2014.07.001
Paixão A, Fortunato E, Calçada R (2014) Transition zones to railway bridges: track measurements and numerical modelling. Eng Struct 80:435–443. https://doi.org/10.1016/j.engstruct.2014.09.024
Bowness D et al (2007) Monitoring the dynamic displacements of railway track. Proc Inst Mech Eng Part F J Rail Rapid Transit 221(1):13–22. https://doi.org/10.1243/0954409jrrt51
Thompson D (2009) Railway noise and vibration mechanisms, modelling and means of control. Elsevier, Oxford, p xv, 518 p
Oppenheim AV, Schafer RW (1975) Digital signal processing. Prentice-Hall
Milne D et al (2016) Proving MEMS technologies for smarter railway infrastructure. Procedia Eng 143:1077–1084. https://doi.org/10.1016/j.proeng.2016.06.222
Milne D et al (2018) Automated processing of railway track deflection signals obtained from velocity and acceleration measurements. Proc Inst Mech Eng Part F J Rail Rapid Transit
Powrie W et al (2019) Train loading effects in railway geotechnical engineering: ground response, analysis, measurement and interpretation. Transp Geotech 21:100261. https://doi.org/10.1016/j.trgeo.2019.100261
Priest J, Powrie W (2009) Determination of dynamic track modulus from measurement of track velocity during train passage. J Geotech Geoenviron Eng 135(11):1732–1740. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000130
Timoshenko S, Langer BF (1932) Stresses in railroad track. ASME Trans 54:277–293
Esveld C (2001) Modern railway track, 2nd edn. MRT-Productions, Delft
Le Pen L et al (2016) Evaluating railway track support stiffness from trackside measurements in the absence of wheel load data. Can Geotech J 53(7):1156–1166. https://doi.org/10.1139/cgj-2015-0268
Ju S-H, Lin H-T, Huang J-Y (2009) Dominant frequencies of train-induced vibrations. J Sound Vib 319(1–2):247–259. https://doi.org/10.1016/j.jsv.2008.05.029
Milne D et al (2017) Properties of train load frequencies and their applications. J Sound Vib 397:123–140. https://doi.org/10.1016/j.jsv.2017.03.006
Le Pen L et al (2019) A model for the stochastic prediction of track support stiffness. Proc Inst Mech Eng Part F J Rail Rapid Transit. https://doi.org/10.1177/0954409719841800
Milne D et al (2019) The influence of variation in track level and support system stiffness over longer lengths of track for track performance and vehicle track interaction. Veh Syst Dyn 1–24. https://doi.org/10.1080/00423114.2019.1677920
Acknowledgements
The research was funded by the Engineering and Physical Sciences Research Council (EPSRC) through the program grant Track to the Future (EP/M025276/1). This work would also not have been possible without the kind assistance given by staff from Network Rail and Network Rail High Speed and members of the infrastructure research group at the University of Southampton.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Milne, D., Le Pen, L., Watson, G., Powrie, W. (2022). Measuring the Performance of Railway Track Through Large-Scale Trackside Sensor Deployments. In: Tutumluer, E., Nazarian, S., Al-Qadi, I., Qamhia, I.I. (eds) Advances in Transportation Geotechnics IV. Lecture Notes in Civil Engineering, vol 165. Springer, Cham. https://doi.org/10.1007/978-3-030-77234-5_60
Download citation
DOI: https://doi.org/10.1007/978-3-030-77234-5_60
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-77233-8
Online ISBN: 978-3-030-77234-5
eBook Packages: EngineeringEngineering (R0)