Abstract
The article deals with issues related to the mechanical machining of a flat surface of a metal-polymer workpiece by flat grinding. The article describes an experiment on flat grinding of a workpiece and determines the dependence of surface roughness as the main parameter on the modes of machining, namely, feed and depth of cut. The data collected in the course of the experiment were analyzed and, according to the results of statistical processing of the experimental results, a model of the roughness of a flat metal-polymer surface was developed depending on the modes of abrasive machining. The article presents both a functional model, presented as a function of roughness from the parameters of the depth of cut and feed, and a graphical representation in the form of a surface graph. The graphical roughness model is a great interest for engineers during setting cutting conditions, as it is more visual and simple. Scientists, who research ways to improve the efficiency of the machining process of parts in the design of which a metal-polymer material is used, can use the functional relationship of roughness, this will optimize the technological parameters according to the required optimization criterion.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Baurova NI, Zorin VA (2016) The use of polymeric materials in the manufacture and repair of machines. MARI, Moscow
Osvald TA, Tung LS, Gremann P (2006) Plastic injection molding. Profession, SPb
Pershin NS, Chepchurov MS (2015) Manufacturing of mold parts from composite materials. Bull Siberian State Autom High Acad 4:86–90
Metal polymers LEO. https://www.leopolimer.ru/index.htm. Accessed 17 Jan 2021
Romanovich AA, Romanovich MA, Belov AI, Chekhovskoy EI (2018) Energy-saving technology of obtaining composite binders using technogenic wastes. J Phys Conf Ser 1118:012035
Spiridonov AA (1989) Planning an experiment in the study of technological processes. Mechanical engineering, Moscow
Lubimyi NS, Chepchurov MS (2015) Influence of the use of evacuation during curing of a metal polymer on its thermal conductivity. Interdisc Approach Mater Sci Technol Theory Pract 159–162
Pershin NS (2015) Air saturation of potting metal polymers. In: International Scientific and Technical Conference of Young Scientists BSTU named after V.G. Shukhov, pp 1456–1459
Belov VV, Obrazcov IV, Kuryatnikov UU (2014) Development of a software-algorithmic tool for data processing of a three-factor planned experiment for calculating a mathematical model of concrete strength. Softw Prod Syst 108:254–259
Belov VPh (2001) Math modeling. Publisher Mordovia University, Saransk
Vilenkin SYa (1979) Statistical processing of the results of the study of random functions. Publisher Energy, Moscow
Gerasimov MD (2016) Addition of vibrations in vibration absorbers. Bull BSTU Named After V.G. Shukhov 3:116–121
Acknowledgements
This work was supported by the grant of the President of the Russian Federation No. MK-4006.2021.4, using equipment of High Technology Center at BSTU named after V.G. Shukhov.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Lubimyi, N.S., Duhanin, S.A., Lymar, I.A., Tikhonov, A.A. (2021). The Research of the Regularities of the Influence of the Parameters of Grinding a Flat Surface on Its Roughness during Machining a Metal Polymer. In: Klyuev, S.V., Klyuev, A.V. (eds) Environmental and Construction Engineering: Reality and the Future. Lecture Notes in Civil Engineering, vol 160. Springer, Cham. https://doi.org/10.1007/978-3-030-75182-1_19
Download citation
DOI: https://doi.org/10.1007/978-3-030-75182-1_19
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-75181-4
Online ISBN: 978-3-030-75182-1
eBook Packages: EngineeringEngineering (R0)