Abstract
Enamel is a thin glassy coating obtained by high-temperature treatment. Technical enamels are applied to products made of cast iron, steel, aluminum and light metal alloys. The metal-enamel combination successfully combines the molding ability and strength of the metal with the chemical resistance and stability of the glass. The aim of this study is to develop methods for decorating non-ferrous metals. Based on the literature analysis, a composition with similar values of the thermal coefficient of linear expansion (TCLE) of enamel (α = 159·10−7 К−1) and copper (α = 162·10−7 К−1) was selected as enamel for decorating copper. The compositions of glass coatings containing fractions of 0.071 mm and 0.1 mm were modeled. The optimal composition of glass coatings was determined experimentally, which contains 70% of the 0.071 mm fraction and 30% of the 0.1 mm fraction. The TCLE of the glass-enamel stack was determined by the dilatometric method with a measurement accuracy of ±1.5%, the TCLE curve was constructed according to the experimental data. The fusibility of the samples was determined in a laboratory muffle silite furnace SNOL-1.6. The frit was made at a temperature of 1250 °C for 0.5 h. The slip was prepared from each composition according to the classical scheme and applied by dip**.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Emelianov, AYu., Petrova, S.G., Kanyukov, N.V.: Traditions of hot enamelling in the Near East and Central Asia: from the Maghreb to Iran. Design. Materials. Technology 1(26), 84–85 (2013)
Fedyayeva, T.N., Emelianov, AYu., Petrova, S.G.: Design of the decorative art objects made with the use of cloisonne technique. Design. Materials Technology. 2(17), 95–97 (2011)
Fedyaeva, T.N., Emelianov, AYu., Petrova, S.G.: Use of glass forming materials as a basis for a painted enamel. Design. Materials. Technology 1(16), 53–55 (2011)
Kovalchenko, N.A., Pavlenko, Z.V.: Waste-bearing decorative glazes for facade ceramics. Glass Ceram. 63(1–2), 26–28 (2006)
Rodtsevich, S.P., Eliseev, SYu., Lukashevich, G.F.: Jewelry enamels with a decreased lead oxide content. Glass Ceram. 8, 27–28 (2001)
Bondarenko, N.I., Bondarenko, D.O., Kochurin, D.V., Bragina, L.L., Yakovenko, T.A.: Sheet construction glass with protective and decorative coatings. Construction Materials and Products 2(4), 11–16 (2019)
Bondarenko, N.I., Bondarenko, D.O.: Processes of forming protective and decorative coatings on concrete at plasma treatment. IOP Conference Series: Materials Science and Engineering 945, 012038 (2020)
Bessmertnyy, V.S., Sokolova, O.N., Bondarenko, N.I., Bondarenko, D.O., Bragina, L.L., Makarov, A.V., Kochurin, D.V.: Plasmachemical modification of thermal insulated blocks with decorative coating. Bulletin of BSTU named after V.G. Shukhov 3, 85–92 (2019)
Bondarenko, D.O., Strokova, V.V.: Operating properties of the coating, depending on the composition during plasma-chemical modification. IOP Conference Series: Earth and Environmental Science. 341, 012141 (2019)
Zubekhin, A.P., Yatsenko, E.A., Klimenko, E.B.: Pb-free boroalumosilicate enamels for decorative articles made of coppers. Glass Ceram. 4, 24–25 (2001)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Bondarenko, N.I., Pavlenko, Z.V., Bondarenko, D.O. (2021). Decoration of Non-ferrous Metals. In: Klyuev, S.V., Klyuev, A.V. (eds) Proceedings of the International Conference Industrial and Civil Construction 2021. ICICC 2021. Lecture Notes in Civil Engineering, vol 147. Springer, Cham. https://doi.org/10.1007/978-3-030-68984-1_6
Download citation
DOI: https://doi.org/10.1007/978-3-030-68984-1_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-68983-4
Online ISBN: 978-3-030-68984-1
eBook Packages: EngineeringEngineering (R0)