Abstract
In this paper, we present a novel, speculative design approach for a bio-hybrid architectural system. The Living Weaves system seeks to harness the material accumulation capacity of climbing plants and steer this growth into an interlaced configuration with a diagrid scaffold to produce a structural Kagome weave. The concept is described through a speculative design proposal, and its feasibility is investigated in two ways; the development of an autonomous steering system to achieve interlacing of living plants with a diagrid scaffold, and an analytical design method for determining structurally advantageous plant growth routes in target geometries. Together, these two investigations represent steps towards a persistent modelling approach, which, we argue, is essential for exploiting the novel characteristics of living bio-hybrid architectures.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Ayres, P., Martin, A.G., Zwierzycki, M.: Beyond the Basket Case: a principled approach to the modelling of Kagome weave patterns for the fabrication of interlaced lattice structures using straight strips. In: Advances in Architectural Geometry 2018, pp. 72–93. Chalmers University of Technology (2018)
Mesnil, R., et al.: Linear buckling of quadrangular and Kagome gridshells: a comparative assessment. Eng. Struct. 132, 337–348 (2017)
Stolarz, M.: Circumnutation as a visible plant action and reaction: physiological, cellular and molecular basis for circumnutations. Plant Signal. Behav. 4(5), 380–387 (2009)
Ayres, P. (ed.): Persistent Modelling: Extending the Role of Architectural Representation. Routledge, Abingdon (2012)
Ayres, P.: Microstructure, macrostructure and the steering of material proclivities. In: Manufacturing the Bespoke, pp. 220–237. Wiley (2012)
flora robotica – societies of symbiotic robot-plant bio-hybrids as social architectural artifacts. http://www.florarobotica.eu. Accessed 05 June 2019
Elsacker, E., et al.: Mechanical, physical and chemical characterisation of mycelium-based composites with different types of lignocellulosic substrates. BioRxiv, p. 569749 (2019)
Vallas, T., Courard, L.: Using nature in architecture: building a living house with mycelium and trees. Front. Archit. Res. 6(3), 318–328 (2017)
Heisel, F., et al.: Design of a load-bearing mycelium structure through informed structural engineering. In: Proceedings of the World Congress on Sustainable Technologies (2017)
Ludwig, F., Schwertfreger, H., Storz, O.: Living systems: designing growth in Baubotanik. Archit. Des. 82(2), 82–87 (2012)
Fab Tree Hab. https://en.wikipedia.org/wiki/Fab_Tree_Hab. Accessed 29 Mar 2019
Wahby, M., et al.: Evolution of controllers for robot-plant bio-hybdrids: a simple case study using a model of plant growth and motion. In: Proceedings of the 25th Workshop on Computational Intelligence, pp. 67–86 (2015)
Wahby, M., et al.: An evolutionary robotics approach to the control of plant growth and motion: modeling plants and crossing the reality gap. In: 2016 IEEE 10th International Conference Self-Adaptive and Self-Organizing Systems (SASO), pp. 21–30 (2016)
Hofstadler, D., et al.: Evolved control of natural plants: crossing the reality gap for user-defined steering of growth and motion. ACM Trans. Auton. Adapt. Syst. (TAAS) 12(3), 15 (2017)
Wahby, M., et al.: Autonomously sha** natural climbing plants: a bio-hybrid approach. Roy. Soc. Open Sci. 5(10), 180296 (2018)
Acknowledgements
This work was supported by the European Union’s Horizon 2020 research and innovation program under the project flora robotica – FET grant agreement no. 640959.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Ayres, P., Buchwald, E.F., Gatz, S., Bornaz, S. (2020). Living Weaves – Steps Towards the Persistent Modelling of Bio-Hybrid Architectural Systems. In: Gengnagel, C., Baverel, O., Burry, J., Ramsgaard Thomsen, M., Weinzierl, S. (eds) Impact: Design With All Senses. DMSB 2019. Springer, Cham. https://doi.org/10.1007/978-3-030-29829-6_35
Download citation
DOI: https://doi.org/10.1007/978-3-030-29829-6_35
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-29828-9
Online ISBN: 978-3-030-29829-6
eBook Packages: EngineeringEngineering (R0)