Abstract
This chapter presents two set of experimental studies on dry and minimum quantity lubrication (MQL) drilling with shallow and deep holes. The first study is focused on high-speed (high-throughput) shallow hole drilling of compacted graphite iron between dry and MQL conditions. The second example is focused on deep-hole drilling (without pecking cycle) of nodular irons under various MQL conditions. All tested are conducted with the state-of-the-art coated solid WC-Co drills. Detailed experimental methods and key results are presented.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Alves S, Schroeter R, Bossardi RB, Andrade C (2011) Influence of EP additive on tool wear in drilling of compacted graphite iron. J Braz Soc Mech Sci Eng 33:197–202
Mocellin F, Melleras E, Guesser WL, Boehs L (2004) Study of the machinability of compacted graphite iron for drilling process. J Braz Soc Mech Sci Eng 26:22–27
de Oliveira VV, Beltrão P, Pintaude G (2011) Effect of tool geometry on the wear of cemented carbide coated with TiAlN during drilling of compacted graphite iron. Wear 271:2561–2569
Paiva JMF, Amorim FL, Soares P, Torres RD (2013) Evaluation of hard coating performance in drilling compacted graphite iron (CGI). J Mater Eng Perform 22:195
Hussain MI, Taraman KS, Filipovic AJ, Immo G (2008) Experimental study to analyse the workpiece surface temperature in deep hole drilling of aluminium alloy engine blocks using MQL technology. J Achiev Mater Manuf Eng 31:485–490
Agapiou J (2010) Development of gun-drilling MQL process and tooling for machining of compacted graphite iron (CGI). Trans North Am Manuf Res Inst SME 38:73–80
Tai B, Stephenson DA, Shih AJ (2013) Workpiece temperature during deep-hole drilling of cast iron using high air pressure minimum quantity lubrication. J Manuf Sci Eng 135:1–7
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Shih, A.J., Tai, B.L., Li, R. (2019). Experimental Analysis of Cast Iron Drilling with Dry and MQL Conditions. In: Metal and Bone Drilling - The Thermal Aspects. Springer, Cham. https://doi.org/10.1007/978-3-030-26047-7_4
Download citation
DOI: https://doi.org/10.1007/978-3-030-26047-7_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-26046-0
Online ISBN: 978-3-030-26047-7
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)