Abstract
This paper presents computational method for prediction of cutting force components during end milling process. Introduced method is a hybrid model combining finite element analysis (FEA) with classical analytical approach. Explicit 2D FE analysis is used to determine specific cutting force coefficients for specified tool geometry and workpiece material. Mechanistic analytical model utilizing data from FEA models transforms cutting force components Fc and FcN from tool-in-hand coordinate system into force components Ff and FfN of machine coordinate system yet additionally providing time history of forces by presenting them as a function of cutter rotation. Predicted forces from hybrid model are compared with empirical measurements of end milling process.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Altintas, Y.: Manufacturing Automation. CUP, Cambridge (2012)
Budak, E., Altintas, Y.: Prediction of milling force coefficients from orthogonal cutting data. J. Manuf. Sci. Eng. 118, 216–224 (1996)
Bringas, J.E.: Handbook of Comparative World Steel Standards. ASTM International (2004)
Cook, W.H., Johnson, G.R.: A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: Proceedings of the 7th International Symposium on Ballistics (1983)
Ducobu, F., Rivière-Lorphèvre, E., Filippi, E.: Finite element modelling of 3D orthogonal cutting experimental tests with the Coupled Eulerian-Lagrangian (CEL) formulation. Finite Elem. Anal. Des. 134, 27–40 (2017)
Guzeev, V.I., Pimenov, D.Y.: Cutting force in face milling with tool wear. Russ. Eng. Res. 31(10), 989–993 (2011)
**, X., Altintas, Y.: Prediction of micro-milling forces with finite element method. J. Mater. Process. Technol. 212, 542–552 (2012)
**g, X., Li, H., Wang, J., Tian, Y.: Modelling the cutting forces in micro-end-milling using a hybrid approach. Int. J. Adv. Manuf. Technol. 74, 1647–1656 (2014)
Krawiec, P., Grzelka, M., Kroczak, J., Domek, G., Kołodziej, A.: A proposal of measurement methodology and assessment of manufacturing methods of nontypical cog belt pulleys. Meas.: J. Int. Meas. Confed. 132, 182–190 (2019)
Mashayekhi, M., Salimi, M., Vaziri, M.R.: Evaluation of chip formation simulation models for material separation in the presence of damage models. Simul. Model. Pract. Theory 19, 718–733 (2011)
Moćko, W.: Effects of cumulative fatigue damage under tensional cyclic loading on the constitutive relation of AISI 1045 steel. In: Proceedings of the 4th International Conference on Nonlinear Dynamics (2013)
Pantale, O.: 2D and 3D numerical models of metal cutting with damage effects. Comput. Methods Appl. Mech. Eng. 193, 4383–4399 (2004)
Pimenov, D.Y., Guzeev, V.I.: Mathematical model of plowing forces to account for flank wear using FME modeling for orthogonal cutting scheme. Int. J. Adv. Manuf. Technol. 89(9–12), 3149–3159 (2017)
Przestacki, D., Chwalczuk, T., Wojciechowski, S.: The study on minimum uncut chip thickness and cutting forces during laser-assisted turning of WC/NiCr clad layers. Int. J. Adv. Manuf. Technol. 91(9–12), 3887–3898 (2017)
Sahoo, P., Pratap, T., Patra, K.: A hybrid modelling approach towards prediction of cutting forces in micro end milling of Ti-6Al-4V titanium alloy. Int. J. Mech. Sci. 150, 495–509 (2019)
Twardowski, P., Wojciechowski, S., Wieczorowski, M., Mathia, T.: Surface roughness analysis of hardened steel after high-speed milling. Scanning 33, 1–10 (2011)
Wojciechowski, S., Mrozek, K.: Mechanical and technological aspects of micro ball end milling with various tool inclinations. Int. J. Mech. Sci. 134, 424–435 (2017)
Yuan, Y., **g, X., Ehmann, K.F., Cao, J., Li, H., Zhang, D.: Modeling of cutting forces in micro end-milling. J. Manuf. Process. 31, 844–858 (2018)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Madajewski, M., Wojciechowski, S., Znojkiewicz, N., Twardowski, P. (2019). Hybrid Numerical-Analytical Approach for Force Prediction in End Milling of 42CrMo4 Steel. In: Gapiński, B., Szostak, M., Ivanov, V. (eds) Advances in Manufacturing II. MANUFACTURING 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-16943-5_20
Download citation
DOI: https://doi.org/10.1007/978-3-030-16943-5_20
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-16942-8
Online ISBN: 978-3-030-16943-5
eBook Packages: EngineeringEngineering (R0)