Abstract
The sha** of an element of titanium rod in hot stam** is considered. In CAE (computer-aided engineering) modeling, the deformation of rods of different cross section at different tool speeds is calculated. The upsetting forces, the stress state at hazardous sections of the rod, and the deformation parameters are analyzed. The dependence of the stress state on the deformation speed and forces is established.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1068798X24700631/MediaObjects/11980_2024_3779_Fig1_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1068798X24700631/MediaObjects/11980_2024_3779_Fig2_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1068798X24700631/MediaObjects/11980_2024_3779_Fig3_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1068798X24700631/MediaObjects/11980_2024_3779_Fig4_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.3103%2FS1068798X24700631/MediaObjects/11980_2024_3779_Fig5_HTML.png)
REFERENCES
Larin, S.N., Platonov, V.I., and Larina, M.V., Influence of geometry of a deforming tool on a stressed-deformed state in combined extraction, Izv. Tul. Gos. Univ. Tekh. Nauki, 2020, no. 5, pp. 451–456.
Springer, P. and Prahl, U., Characterisation of mechanical behavior of 18CrNiMo7-6 steel with and without under warm forging conditions through processing maps analysis, J. Mater. Process. Technol., 2016, vol. 237, pp. 216–234.
Malinin, N.N., Polzuchest’ v obrabotke metallov (Creep in Metal Processing), Moscow: Mashinostroenie, 1986.
Pasynkov, A.A., Boriskin, O.I., and Larin, S.N., Theoretical studies of the operation of isothermal crushing of pipes from hard-to-deform nonferrous alloys under short-term creep conditions, Tsvetn. Met., 2018, no. 2, pp. 74–78.
Larin, S.N. and Pasynkov, A.A., Analysis of forming properties during the isothermal upsetting of cylindrical workpieces in the viscous-plasticity mode, IOP Conf. Ser.: Mater. Sci. Eng., 2018, vol. 44, no. 1, p. 012026.
Unksov, E.P., Johnson, W., Kolmogorov, V.L., et al., Teoriya plasticheskikh deformatsii metallov (Plastic Deformation Theory of Metals), Moscow: Mashinostroenie, 1983.
Panfilov, G.V., Nedoshivin, S.V., and Perminov, D.A., Application statistical machine experiment for investigating theoretical models stam** cores bullets, Izv. Tul. Gos. Univ. Tekh. Nauki, 2014, no. 6, pp. 61–73.
Funding
Financial support was provided by the Russian Science Foundation (grant no. 23-29-00470).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Translated by B. Gilbert
Publisher’s Note.
Allerton Press remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Pasynkov, A.A., Romanov, P.V. & Bessmertnaya, J.V. Slow Flow in Upsetting Titanium Rods. Russ. Engin. Res. 44, 517–520 (2024). https://doi.org/10.3103/S1068798X24700631
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X24700631