Abstract
Multiwalled carbon nanotubes were obtained by pyrolitic vapor deposition and composites with epoxy resin were synthesized. The Raman spectra show characteristic carbon nanotube peaks on epoxy resin composite samples. The charge characteristics of the obtained samples were studied using an electron probe measuring complex. In samples of composites based on aligned nanotubes with epoxy resin, charging under an electron beam was observed to a much lesser extent. The results demonstrate the possibility of using a polymer composite with aligned nanotubes as an antidynatron coating.
Similar content being viewed by others
REFERENCES
M. Liu, L. Bauman, C. L. Nogueira, M. G. Aucoin, et al., Curr. Opin. Biomed. Eng., 100395 (2022).
A. Khan, M. Puttegowda, P. Jagadeesh, et al., J. Mater. Res. Technol. 18, 2175 (2022).
K. S. Ibrahim, Carbon Lett. 14, 131 (2013).
V. A. Kobzev, N. G. Chechenin, K. A. Bukunov, et al., Mater. Today: Proc. 5, 26096 (2018).
E. A. Vorobyeva, A. P. Evseev, V. L. Petrov, et al., Moscow Univ. Phys. Bull. 76, 29 (2021).
Y. Wang and J. T. W. Yeow, J. Sens., 1–24 (2009).
M. Ashizawa, Y. Zheng, H. Tran, et al., Prog. Polym. Sci. 100, 101181 (2020).
L. Gorbatikh, B. L. Wardle, and S. Lomov, MRS Bull. 41, 672 (2016).
M. Azizi-Lalabadi, H. Hashemi, J. Feng, et al., Adv. Colloid Interface Sci. 284, 102250 (2020).
I. Babahan-Bircan, I. Demirkaya, S. O. H. Hasan, et al., Prog. Org. Coat. 165, 106714 (2022).
T. B. Nguyen Thi, S. Ata, T. Morimoto, et al., Polymer (Guildf.) 245, 124680 (2022).
G. Gonzalez, A. Chiappone, I. Roppolo, et al., Polymer (Guildf.) 109, 246 (2017).
D. J. Thomas, Int. J. Adv. Manuf. Tech. 95, 4191 (2018).
M. K. Alam, P. Yaghoobi, M. Chang, et al., Appl. Phys. Lett. 97, 261902 (2010).
A. T. Dideykin, E. D. Eidelman, and A. Y. Vul’, Solid State Commun. 126, 495 (2003).
N. G. Chechenin, P. N. Chernykh, E. A. Vorobyeva, et al., Appl. Surf. Sci. 275, 217 (2013).
Y. Piao, V. N. Tondare, C. S. Davis, et al., Compos. Sci. Technol. 208, 108753 (2021).
J. F. Brun, C. Binet, J. F. Tahon, et al., Synth. Met. 269, 116525 (2020).
K. A. Bukunov, E. A. Vorobyeva, N. G. Chechenin, Moscow Univ. Phys. Bull. 77, 50 (2022).
N. N. Andrianova, A. M. Borisov, V. A. Kazakov, et al., Vacuum 179, 109469 (2020).
E. I. Rau, E. N. Evstaf’eva, S. I. Zaitsev, M. A. Knyazev, A. A. Svintsov, and A. A. Tatarintsev, Russ. Microelectron. 42, 89 (2013).
A. N. Curren, R. Forman, J. S. Sovey, et al., US Patent No. US4417175A (1983).
F. Fornasiero, M. Leblanc, S. Charnvanichborikarn, et al., Carbon 99, 491 (2016).
Funding
The work is supported by the Russian Science Foundation, project no. 21-79-00190.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by E. Oborin
About this article
Cite this article
Vorobyeva, E.A., Peshnina, D.O., Tatarintsev, A.A. et al. Synthesis of Polymer Composites Reinforced with Carbon Nanotubes and a Study of Their Charging under an Electron Beam. Moscow Univ. Phys. 77, 622–626 (2022). https://doi.org/10.3103/S0027134922040130
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0027134922040130