Abstract
Cabled seafloor observatories play an important role in ocean exploration for its long-term, real-time, and in-situ observation characteristics. In establishing a permanent, reliable, and robust seafloor observatory, a highly reliable cable switching and fault isolation method is essential. After reviewing the advantages and disadvantages of existing switching methods, we propose a novel active switching method for network configuration. Without additional communication path requirements, the switching method provides a way to communicate with a shore station through an existing power transmission path. A coded voltage signal with a distinct sequence is employed as the communication medium to transmit commands. The analysis of the maximum bit frequency of the voltage signals guarantees the accuracy of command recognition. A prototype based on the switching method is built and tested in a laboratory environment, which validated the functionality and reliability of the method.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Aguzzi J, Mànuel A, Condal F, et al., 2011. The new Seafloor Observatory (OBSEA) for remote and long-term coastal ecosystem monitoring. Sensors, 11(6):5850–5872. https://doi.org/10.3390/s110605850
Chen Y, Yang C, Li D, et al., 2013. Study on 10 kVDC powered junction box for a cabled ocean observatory system. China Ocean Eng, 27(2):265–275. https://doi.org/10.1007/s13344-013-0023-y
Chen Y, Howe BM, Yang C, 2015. Actively controllable switching for tree topology seafloor observation networks. IEEE J Ocean Eng, 40(4):993–1002. https://doi.org/10.1109/JOE.2014.2362830
El-Sharkawi MA, Upadhye A, Lu S, et al., 2005. North East Pacific Time-integrated Undersea Networked Experiments (NEPTUNE): cable switching and protection. IEEE J Ocean Eng, 30(1):232–240. https://doi.org/10.1109/JOE.2004.839938
Favali P, Beranzoli L, 2006. Seafloor observatory science: a review. Ann Geophys, 49(2-3):515–567. https://doi.org/10.4401/ag-3125
Favali P, Beranzoli L, de Santis A, 2015. Seafloor Observatories. Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-642-11374-1
Grainger J, Stevenson W, 1994. Power System Analysis. McGrawHill, New York, USA.
Howe BM, Kirkham H, Vorperian V, 2002. Power system considerations for undersea observatories. IEEE J Oceanic Eng, 27(2):267–274. https://doi.org/10.1109/JOE.2002.1002481
Howe BM, Chan T, Sharkawi ME, et al., 2006. Power system for the MARS ocean cabled observatory. Scientific Submarine Cabled Conf, p.121–126.
Hsiao N, Lin T, Hsu S, et al., 2014. Improvement of earthquake locations with the Marine Cable Hosted Observatory (MACHO) offshore NE Taiwan. Mar Geophys Res, 35(3):327–336. https://doi.org/10.1007/s11001-013-9207-3
Kawaguchi K, Kaneda Y, Araki E, 2008. The DONET: a real-time seafloor research infrastructure for the precise earthquake and tsunami monitoring. OCEANS, p.121–124. https://doi.org/10.1109/OCEANSKOBE.2008.4530918
Kempkes M, Roth I, Gaudreau M, 2011. Solid-state circuit breakers for medium voltage DC power. IEEE Electric Ship Technologies Symp, p.254–257. https://doi.org/10.1109/ESTS.2011.5770877
Kevin S, 1996. VHDL for Programmable Logic. Prentice Hall, New Jersey, USA.
Kirkham H, Lancaster P, Liu CC, et al., 2003. The NEPTUNE power system: design from fundamentals. Proc Int Conf on Physics and Control, p.301–306. https://doi.org/10.1109/SSC.2003.1224167
Lu S, El-Sharkawi MA, 2006. NEPTUNE power system: detection and location of switch malfunctions and high impedance faults. IEEE Int Symp on Industrial Electronics, p.1960–1965. https://doi.org/10.1109/ISIE.2006.295873
Meloni A, Lanzerotti LJ, Gregori GP, 1983. Induction of currents in long submarine cables by natural phenomena. Rev Geophys Space Phys, 21(4):795–803. https://doi.org/10.1029/RG021i004p00795
Petitt RA, Harris DW, Wooding B, et al., 2002. The Hawaii-2 Observatory. IEEE J Ocean Eng, 27(2):245–253. https://doi.org/10.1109/JOE.2002.1002479
Tang L, Ooi B, 2007. Locating and isolating DC faults in multi-terminal DC systems. IEEE J Power Del, 22(3):1877–1884. https://doi.org/10.1109/TPWRD.2007.899276
Thomas R, Akhtar A, Bakhshi B, et al., 2013. Data transmission and electrical powering flexibility for cabled ocean observatories. OCEANS, p.1–7. https://doi.org/10.23919/OCEANS.2013.6741349
Xu H, Zhang Y, Xu C, et al., 2011. Coastal seafloor observatory at **aoqushan in the East China Sea. Chin Sci Bull, 56(26):2839–2845. https://doi.org/10.1007/s11434-011-4620-y
Yinger P, Tennant P, Reardon J, et al., 2013. Commissioning of a system that terminates on the seafloor. OCEANS, p.1–6. https://doi.org/10.1016/j.oceaneng.2012.11.007
Zhang F, Chen Y, Li D, et al., 2015. A double-node star network coastal ocean observatory. Mar Technol Soc J, 49(1):59–70. https://doi.org/10.4031/MTSJ.49.1.7
Author information
Authors and Affiliations
Corresponding author
Additional information
Project supported by the National Natural Science Foundation of China (Nos. 51409229, 41676089, and 51521064), the National High-Tech R&D Program (863) of China (No. 2012AA09A410), and the Zhejiang Provincial Natural Science Foundation of China (No. LQ14E070002)
Rights and permissions
About this article
Cite this article
Zhang, Zf., Chen, Yh., Li, Dj. et al. Use of a coded voltage signal for cable switching and fault isolation in cabled seafloor observatories. Frontiers Inf Technol Electronic Eng 19, 1328–1339 (2018). https://doi.org/10.1631/FITEE.1601843
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1631/FITEE.1601843
Key words
- Cabled seafloor observatories
- Cable switching and fault isolation
- Coded voltage signal
- Maximum bit frequency