Abstract
3D bioprinting has the capability to create 3D cellular constructs with the desired shape using a layer-by-layer approach. Inkjet 3D bioprinting, as a key component of 3D bioprinting, relies on the deposition of cell-laden droplets to create native-like tissues/organs which are envisioned to be transplantable into human body for replacing damaged ones. Benefiting from its superiorities such as high printing resolution and deposition accuracy, inkjet 3D bioprinting has been widely applied to various areas, including, but not limited to, tissue engineering and drug screening in pharmaceutics. Even though inkjet 3D bioprinting has proved its feasibility and versatility in various fields, the current applications of inkjet 3D bioprinting are still limited by the printing technique and material selection. This review, which specifically focuses on inkjet 3D bioprinting, firstly summarizes the techniques, materials, and applications of inkjet 3D bioprinting in tissue engineering and drug screening, subsequently discusses the major challenges that inkjet 3D bioprinting is facing, and lastly summarizes potential solutions to those challenges.
概要
生物3D打印具有通过层层叠加增材制造的方式构建所需载活细胞3D结构的能力。作为生物3D打印技术的重要组成部分,喷墨生物3D打印利用载细胞液滴作为基本单元,构造仿生组织或器官,以期用于替代人体损伤或病变的组织或器官。由于其优异的打印精度和准确性,喷墨生物3D打印目前已被广泛应用于组织工程和药物研发等领域。然而,尽管大量的应用已证明其在不同领域内的可行性和广泛适用性,喷墨生物3D打印仍然受限于生物材料的选择和打印工艺。本文针对喷墨生物3D打印,首先归纳总结了现有关键打印技术、可打印生物材料和其在组织工程和药学领域内的典型应用,进而对其面临的关键挑战和潜在解决方案进行讨论。
Similar content being viewed by others
References
Albanna M, Binder KW, Murphy SV, et al., 2019. In situ bioprinting of autologous skin cells accelerates wound healing of extensive excisional full-thickness wounds. Scientific Reports, 9(1):1856. https://doi.org/10.1038/s41598-018-38366-w
Arrabito G, Pignataro B, 2010. Inkjet printing methodologies for drug screening. Analytical Chemistry, 82(8):3104–3107. https://doi.org/10.1021/ac100169w
Basaran OA, Gao HJ, Bhat PP, 2013. Nonstandard inkjets. Annual Review of Fluid Mechanics, 45:85–113. https://doi.org/10.1146/annurev-fluid-120710-101148
Bedell ML, Torres AL, Hogan KJ, et al., 2022. Human gelatin-based composite hydrogels for osteochondral tissue engineering and their adaptation into bioinks for extrusion, inkjet, and digital light processing bioprinting. Biofabrication, 14(4):045012. https://doi.org/10.1088/1758-5090/ac8768
Blaeser A, Duarte Campos DF, Puster U, et al., 2016. Controlling shear stress in 3D bioprinting is a key factor to balance printing resolution and stem cell integrity. Advanced Healthcare Materials, 5(3):326–333. https://doi.org/10.1002/adhm.201500677
Cai SX, Sun YL, Wang Z, et al., 2021. Mechanisms, influencing factors, and applications of electrohydrodynamic jet printing. Nanotechnology Reviews, 10(1): 1046–1078.
Campbell A, Mohl JE, Gutierrez DA, et al., 2020. Thermal bioprinting causes ample alterations of expression of LUCAT1, IL6, CCL26, and NRN1L genes and massive phosphorylation of critical oncogenic drug resistance pathways in breast cancer cells. Frontiers in Bioengineering and Biotechnology, 8:82. https://doi.org/10.3389/fbioe.2020.00082
Chen EP, Toksoy Z, Davis BA, et al., 2021. 3D bioprinting of vascularized tissues for in vitro and in vivo applications. Frontiers in Bioengineering and Biotechnology, 9:664188. https://doi.org/10.3389/fbioe.2021.664188
Christensen K, Xu CX, Chai WX, et al., 2015. Freeform inkjet printing of cellular structures with bifurcations. Biotechnology and Bioengineering, 112(5): 1047–1055. https://doi.org/10.1002/bit.25501
Cooper GM, Miller ED, DeCesare GE, et al., 2010. Inkjet-based biopatterning of bone morphogenetic protein-2 to spatially control calvarial bone formation. Tissue Engineering Part A, 16(5):1749–1759. https://doi.org/10.1089/ten.tea.2009.0650
Cui XF, Boland T, 2009. Human microvasculature fabrication using thermal inkjet printing technology. Biomaterials, 30(31):6221–6227. https://doi.org/10.1016/j.biomaterials.2009.07.056
Cui XF, Boland T, D’Lima DD, et al., 2012. Thermal inkjet printing in tissue engineering and regenerative medicine. Recent Patents on Drug Delivery & Formulation, 6(2): 149–155. https://doi.org/10.2174/187221112800672949
Derby B, 2010. Inkjet printing of functional and structural materials: fluid property requirements, feature stability, and resolution. Annual Review of Materials Research, 40: 395–414. https://doi.org/10.1146/annurev-matsci-070909-104502
Derby B, 2012. Printing and prototy** of tissues and scaffolds. Science, 338(6109):921–926. https://doi.org/10.1126/science.1226340
Duarte Campos DF, Rohde M, Ross M, et al., 2019. Corneal bioprinting utilizing collagen-based bioinks and primary human keratocytes. Journal of Biomedical Materials Research Part A, 107(9):1945–1953. https://doi.org/10.1002/jbm.a.36702
Dufour A, Gallostra XB, O’Keeffe C, et al., 2022. Integrating melt electrowriting and inkjet bioprinting for engineering structurally organized articular cartilage. Biomaterials, 283:121405. https://doi.org/10.1016/J.BIOMATERIALS.2022.121405
Eggers J, Villermaux E, 2008. Physics of liquid jets. Reports on Progress in Physics, 71(3):036601. https://doi.org/10.1088/0034-4885/71/3/036601
Faulkner-Jones A, Fyfe C, Cornelissen DJ, et al., 2015. Bioprinting of human pluripotent stem cells and their directed differentiation into hepatocyte-like cells for the generation of mini-livers in 3D. Biofabrication, 7(4):044102. https://doi.org/10.1088/1758-5090/7/4/044102
Freeman FE, Pitacco P, van Dommelen LHA, et al., 2020. 3D bioprinting spatiotemporally defined patterns of growth factors to tightly control tissue regeneration. Science Advances, 6(33):eabb5093. https://doi.org/10.1126/sciadv.abb5093
Gao DJ, Zhou JG, 2019. Designs and applications of electrohydrodynamic 3D printing. International Journal of Bioprinting, 5(1):172. https://doi.org/10.18063/ijb.v5i1.172
Gao GF, Yonezawa T, Hubbell K, et al., 2015. Inkjet-bioprinted acrylated peptides and PEG hydrogel with human mesenchymal stem cells promote robust bone and cartilage formation with minimal printhead clogging. Biotechnology Journal, 10(10):1568–1577. https://doi.org/10.1002/biot.201400635
Gasperini L, Maniglio D, Motta A, et al., 2015. An electrohydrodynamic bioprinter for alginate hydrogels containing living cells. Tissue Engineering Part C: Methods, 21(2): 123–132. https://doi.org/10.1089/ten.tec.2014.0149
Godleman J, Leroux F, Reynolds S, et al., 2021. Aromatic poly (fluorocarbinol)s: soluble, hydrophobic binders for inkjet formulations. Progress in Organic Coatings, 158: 106378. https://doi.org/10.1016/j.porgcoat.2021.106378
Griffith LG, Wu B, Cima MJ, et al., 1997. In vitro organogenesis of liver tissue. Annals of the New York Academy of Sciences, 831(1):382–397. https://doi.org/10.1111/j.1749-6632.1997.tb52212.x
Gudapati H, Ozbolat IT, 2020. The role of concentration on drop formation and breakup of collagen, fibrinogen, and thrombin solutions during inkjet bioprinting. Langmuir, 36(50):15373–15385. https://doi.org/10.1021/acs.langmuir.0c02926
Gudapati H, Dey M, Ozbolat I, 2016. A comprehensive review on droplet-based bioprinting: past, present and future. Biomaterials, 102:20–42. https://doi.org/10.1016/j.biomaterials.2016.06.012
Gurkan UA, El Assal R, Yildiz SE, et al., 2014. Engineering anisotropic biomimetic fibrocartilage microenvironment by bioprinting mesenchymal stem cells in nanoliter gel droplets. Molecular Pharmaceutics, 11(7):2151–2159. https://doi.org/10.1021/mp400573g
Guvendiren M, Molde J, Soares RMD, et al., 2016. Designing biomaterials for 3D printing. ACS Biomaterials Science & Engineering, 2(10):1679–1693. https://doi.org/10.1021/acsbiomaterials.6b00121
He Y, Nie J, **e M, et al., 2020. Why choose 3D bioprinting? Part III: printing in vitro 3D models for drug screening. Bio-Design and Manufacturing, 3:160–163. https://doi.org/10.1007/s42242-020-00067-7
Herran CL, Huang Y, 2012. Alginate microsphere fabrication using bipolar wave-based drop-on-demand jetting. Journal of Manufacturing Processes, 14(2):98–106. https://doi.org/10.1016/j.jmapro.2011.11.001
Herran CL, Coutris N, 2013. Drop-on-demand for aqueous solutions of sodium alginate. Experiments in Fluids, 54(6): 1548. https://doi.org/10.1007/s00348-013-1548-9
Hoath SD, 2016. Fundamentals of Inkjet Printing: the Science of Inkjet and Droplets. John Wiley & Sons, Weinheim, Germany.
Hopp B, Smausz T, Szabó G, et al., 2012. Femtosecond laser printing of living cells using absorbing film-assisted laser-induced forward transfer. Optical Engineering, 51(1): 014302. https://doi.org/10.1117/1.OE.51.1.014302
Jung MS, Skhinas JN, Du EY, et al., 2022. A high-throughput 3D bioprinted cancer cell migration and invasion model with versatile and broad biological applicability. Biomaterials Science, 10(20):5876–5887. https://doi.org/10.1039/D2BM00651K
Kang D, Park JA, Kim W, et al., 2021. All-inkjet-printed 3D alveolar barrier model with physiologically relevant microarchitecture. Advanced Science, 8(10):2004990. https://doi.org/10.1002/advs.202004990
Kim YK, Park JA, Yoon WH, et al., 2016. Drop-on-demand inkjet-based cell printing with 30-µm nozzle diameter for cell-level accuracy. Biomicrofluidics, 10(6):064110. https://doi.org/10.1063/1.4968845
Klebe RJ, 1988. Cytoscribing: a method for micropositioning cells and the construction of two-and three-dimensional synthetic tissues. Experimental Cell Research, 179(2): 362–373. https://doi.org/10.1016/0014-4827(88)90275-3
Knowlton S, Onal S, Yu CH, et al., 2015. Bioprinting for cancer research. Trends in Biotechnology, 33(9):504–513. https://doi.org/10.1016/j.tibtech.2015.06.007
Kumar P, Ebbens S, Zhao XB, 2021. Inkjet printing of mammalian cells—theory and applications. Bioprinting, 23: e00157. https://doi.org/10.1016/J.BPRINT.2021.E00157
Kwon KS, Rahman MK, Phung TH, et al., 2020. Review of digital printing technologies for electronic materials. Flexible and Printed Electronics, 5(4):043003. https://doi.org/10.1088/2058-8585/ABC8CA
Lee BK, Yun YH, Choi JS, et al., 2012. Fabrication of drug-loaded polymer microparticles with arbitrary geometries using a piezoelectric inkjet printing system. International Journal of Pharmaceutics, 427(2):305–310. https://doi.org/10.1016/j.ijpharm.2012.02.011
Lee W, Debasitis JC, Lee VK, et al., 2009. Multi-layered culture of human skin fibroblasts and keratinocytes through three-dimensional freeform fabrication. Biomaterials, 30(8):1587–1595. https://doi.org/10.1016/j.biomaterials.2008.12.009
Levato R, Jungst T, Scheuring RG, et al., 2020. From shape to function: the next step in bioprinting. Advanced Materials, 32(12):1906423. https://doi.org/10.1002/adma.201906423
Li HY, Liu JK, Li K, et al., 2019. Piezoelectric micro-jet devices: a review. Sensors and Actuators A: Physical, 297: 111552. https://doi.org/10.1016/j.sna.2019.111552
Li XD, Liu BX, Pei B, et al., 2020. Inkjet bioprinting of biomaterials. Chemical Reviews, 120(19):10793–10833. https://doi.org/10.1021/acs.chemrev.0c00008
Lim JH, Kuk K, Shin SJ, et al., 2005. Failure mechanisms in thermal inkjet printhead analyzed by experiments and numerical simulation. Microelectronics Reliability, 45(3–4): 473–478. https://doi.org/10.1016/j.microre1.2004.12.009
Liu JC, Shahriar M, Xu HQ, et al., 2022. Cell-laden bioink circulation-assisted inkjet-based bioprinting to mitigate cell sedimentation and aggregation. Biofabrication, 14(4): 045020. https://doi.org/10.1088/1758-5090/ac8fb7
Liu WJ, Heinrich MA, Zhou YX, et al., 2017. Extrusion bioprinting of shear-thinning gelatin methacryloyl bioinks. Advanced Healthcare Materials, 6(12): 1601451. https://doi.org/10.1002/adhm.201601451
Ma L, Li YT, Wu YT, et al., 2020. The construction of in vitro tumor models based on 3D bioprinting. Bio-Design and Manufacturing, 3(3):227–236. https://doi.org/10.1007/s42242-020-00068-6
Ma XY, Liu J, Zhu W, et al., 2018. 3D bioprinting of functional tissue models for personalized drug screening and in vitro disease modeling. Advanced Drug Delivery Reviews, 132: 235–251. https://doi.org/10.1016/j.addr.2018.06.011
Mandrycky C, Wang ZJ, Kim K, et al., 2016. 3D bioprinting for engineering complex tissues. Biotechnology Advances, 34(4):422–434. https://doi.org/10.1016/j.biotechadv.2015.12.011
Matsusaki M, Sakaue K, Kadowaki K, et al., 2013. Three-dimensional human tissue chips fabricated by rapid and automatic inkjet cell printing. Advanced Healthcare Materials, 2(4):534–539. https://doi.org/10.1002/adhm.201200299
Mironov V, Boland T, Trusk T, et al., 2003. Organ printing: computer-aided jet-based 3D tissue engineering. Trends in Biotechnology, 21(4):157–161. https://doi.org/10.1016/S0167-7799(03)00033-7
Mkhize N, Bhaskaran H, 2022. Electrohydrodynamic jet printing: introductory concepts and considerations. Small Science, 2(2):2100073. https://doi.org/10.1002/smsc.202100073
Moroni L, Burdick JA, Highley C, et al., 2018. Biofabrication strategies for 3D in vitro models and regenerative medicine. Nature Reviews Materials, 3(5):21–37. https://doi.org/10.1038/s41578-018-0006-y
Murphy SV, Atala A, 2014. 3D bioprinting of tissues and organs. Nature Biotechnology, 32(8):773–785. https://doi.org/10.1038/nbt.2958
Nakamura M, Kobayashi A, Takagi F, et al., 2005. Biocompatible inkjet printing technique for designed seeding of individual living cells. Tissue Engineering, 11(11–12): 1658–1666. https://doi.org/10.1089/ten.2005.11.1658
Nakamura M, Iwanaga S, Henmi C, et al., 2010. Biomatrices and biomaterials for future developments of bioprinting and biofabrication. Biofabrication, 2(1):014110. https://doi.org/10.1088/1758-5082/2/1/014110
Ng WL, Lee JM, Yeong WY, et al., 2017. Microvalve-based bioprinting—process, bio-inks and applications. Biomaterials Science, 5(4):632–647. https://doi.org/10.1039/c6bm00861e
Ng WL, Huang X, Shkolnikov V, et al., 2022. Controlling droplet impact velocity and droplet volume: key factors to achieving high cell viability in sub-nanoliter droplet-based bioprinting. International Journal of Bioprinting, 8(1):424. https://doi.org/10.18063/ijb.v8i1.424
Nishiyama Y, Henmi C, Iwanaga S, et al., 2008. Ink jet three-dimensional digital fabrication for biological tissue manufacturing: analysis of alginate microgel beads produced by ink jet droplets for three dimensional tissue fabrication. Journal of Imaging Science and Technology, 52(6): 060201. https://doi.org/10.2352/JimagingSci.Technol.(2008)52: 6(060201)
Nishiyama Y, Nakamura M, Henmi C, et al., 2009. Development of a three-dimensional bioprinter: construction of cell supporting structures using hydrogel and state-of-the-art inkjet technology. Journal of Biomechanical Engineering, 131(3):035001. https://doi.org/10.1115/1.3002759
Peng WJ, Datta P, Ayan B, et al., 2017. 3D bioprinting for drug discovery and development in pharmaceutics. Acta Biomaterialia, 57:26–46. https://doi.org/10.1016/j.actbio.2017.05.025
Pepelanova I, Kruppa K, Scheper T, et al., 2018. Gelatin-methacryloyl (GelMA) hydrogels with defined degree of functionalization as a versatile toolkit for 3D cell culture and extrusion bioprinting. Bioengineering, 5(3):55. https://doi.org/10.3390/bioengineering5030055
Phung TH, Kwon KS, 2022. Improved continuous inkjet for selective area coating using high-viscosity insulating inks. Advanced Engineering Materials, 24(8):2101527.
Poellmann MJ, Barton KL, Mishra S, et al., 2011. Patterned hydrogel substrates for cell culture with electrohydrodynamic jet printing. Macromolecular Bioscience, 11(9): 1164–1168. https://doi.org/10.1002/mabi.201100004
Ramezani H, Zhou LY, Shao L, et al., 2020. Coaxial 3D bioprinting of organ prototyps from nutrients delivery to vascularization. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 21(11):859–875. https://doi.org/10.1631/jzus.A2000261
Rodríguez-Dévora JI, Zhang BM, Reyna D, et al., 2012. High throughput miniature drug-screening platform using bioprinting technology. Biofabrication, 4(3):035001. https://doi.org/10.1088/1758-5082/4/3/035001
Santoni S, Gugliandolo SG, Sponchioni M, et al., 2022. 3D bioprinting: current status and trends—a guide to the literature and industrial practice. Bio-Design and Manufacturing, 5(1):14–42. https://doi.org/10.1007/s42242-021-00165-0
Scoutaris N, Chai F, Maurel B, et al., 2016. Development and biological evaluation of inkjet printed drug coatings on intravascular stent. Molecular Pharmaceutics, 13(1):125–133. https://doi.org/10.1021/acs.molpharmaceut.5b00570
Shah MA, Lee DG, Lee BY, et al., 2021. Classifications and applications of inkjet printing technology: a review. IEEE Access, 9:140079–140102. https://doi.org/10.1109/ACCESS.2021.3119219
Shapira A, Dvir T, 2021. 3D tissue and organ printing—hope and reality. Advanced Science, 8(10):2003751. https://doi.org/10.1002/advs.202003751
Shi J, Wu B, Li SH, et al., 2018. Shear stress analysis and its effects on cell viability and cell proliferation in drop-on-demand bioprinting. Biomedical Physics & Engineering Express, 4(4):045028. https://doi.org/10.1088/2057-1976/aac946
Suntornnond R, Ng WL, Huang X, et al., 2022. Improving printability of hydrogel-based bio-inks for thermal inkjet bioprinting applications via saponification and heat treatment processes. Journal of Materials Chemistry B, 10(31): 5989–6000. https://doi.org/10.1039/D2TB00442A
Takagi D, Lin WK, Matsumoto T, et al., 2019. High-precision three-dimensional inkjet technology for live cell bioprinting. International Journal of Bioprinting, 5(2):208. https://doi.org/10.18063/ijb.v5i2.208
Talbot EL, Berson A, Brown PS, et al., 2012. Evaporation of picoliter droplets on surfaces with a range of wettabilities and thermal conductivities. Physical Review E, 85(6): 061604. https://doi.org/10.1103/physreve.85.061604
Taymour R, Chicaiza-Cabezas NA, Gelinsky M, et al., 2022. Core—shell bioprinting of vascularized in vitro liver sinusoid models. Biofabrication, 14(4):045019. https://doi.org/10.1088/1758-5090/ac9019
Tirella A, Vozzi F, de Maria C, et al., 2011. Substrate stiffness influences high resolution printing of living cells with an ink-jet system. Journal of Bioscience and Bioengineering, 112(1):79–85. https://doi.org/10.1016/j.jbiosc.2011.03.019
Tsai P, Hendrix MHW, Dijkstra RRM, et al., 2011. Microscopic structure influencing macroscopic splash at high weber number. Soft Matter, 7(24):11325–11333. https://doi.org/10.1039/c1sm05801k
Tse C, Whiteley R, Yu T, et al., 2016. Inkjet printing Schwann cells and neuronal analogue NG108-15 cells. Biofabrication, 8:015017. https://doi.org/10.1088/1758-5090/8/1/015017
Unagolla JM, Jayasuriya AC, 2020. Hydrogel-based 3D bioprinting: a comprehensive review on cell-laden hydrogels, bioink formulations, and future perspectives. Applied Materials Today, 18:100479. https://doi.org/10.1016/j.apmt.2019.100479
Wijshoff H, 2010. The dynamics of the piezo inkjet printhead operation. Physics Reports, 491(4–5):77–177. https://doi.org/10.1016/j.physrep.2010.03.003
Workman VL, Tezera LB, Elkington PT, et al., 2014. Controlled generation of microspheres incorporating extracellular matrix fibrils for three-dimensional cell culture. Advanced Functional Materials, 24(18):2648–2657. https://doi.org/10.1002/adfm.201303891
Wu DZ, Xu CX, 2018. Predictive modeling of droplet formation processes in inkjet-based bioprinting. Journal of Manufacturing Science and Engineering, 140(10):101007. https://doi.org/10.1115/1.4040619
**e MJ, Gao Q, Fu JZ, et al., 2020. Bioprinting of novel 3D tumor array chip for drug screening. Bio-Design and Manufacturing, 3(3): 175–188. https://doi.org/10.1007/s42242-020-00078-4
Xu CX, Chai WX, Huang Y, et al., 2012. Scaffold-free inkjet printing of three-dimensional zigzag cellular tubes. Biotechnology and Bioengineering, 109(12):3152–3160. https://doi.org/10.1002/bit.24591
Xu CX, Zhang ZY, Christensen K, et al., 2014. Freeform vertical and horizontal fabrication of alginate-based vascular-like tubular constructs using inkjetting. Journal of Manufacturing Science and Engineering, 136(6):061020. https://doi.org/10.1115/1.4028578
Xu HQ, Liu JC, Zhang ZY, et al., 2022a. Cell sedimentation during 3D bioprinting: a mini review. Bio-Design and Manufacturing, 5(3):617–626. https://doi.org/10.1007/s42242-022-00183-6
Xu HQ, Martinez Salazar DM, Xu CX, 2022b. Investigation of cell concentration change and cell aggregation due to cell sedimentation during inkjet-based bioprinting of cell-laden bioink. Machines, 10(5):315. https://doi.org/10.3390/machines10050315
Xu T, ** J, Gregory C, et al., 2005. Inkjet printing of viable mammalian cells. Biomaterials, 26(1):93–99. https://doi.org/10.1016/j.biomaterials.2004.04.011
Xu T, Rohozinski J, Zhao WX, et al., 2009. Inkjet-mediated gene transfection into living cells combined with targeted delivery. Tissue Engineering Part A, 15(1):95–101. https://doi.org/10.1089/ten.tea.2008.0095
Xu T, Binder KW, Albanna MZ, et al., 2012. Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications. Biofabrication, 5(1):015001. https://doi.org/10.1088/1758-5082/5/1/015001
Xu T, Zhao WX, Zhu JM, et al., 2013. Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology. Biomaterials, 34(1): 130–139. https://doi.org/10.1016/j.biomaterials.2012.09.035
Yang JX, Zheng F, Derby B, 2021. Stability of lines with zero receding contact angle produced by inkjet printing at small drop volume. Langmuir, 37(1):26–34. https://doi.org/10.1021/acs.langmuir.0c01928
Yarin AL, 2006. Drop impact dynamics: splashing, spreading, receding, bouncing…. Annual Review of Fluid Mechanics, 38:159–192. https://doi.org/10.1146/annurev.fluid.38.050304.092144
Yin J, Zhao DK, Liu JY, 2019. Trends on physical understanding of bioink printability. Bio-Design and Manufacturing, 2(1): 50–54. https://doi.org/10.1007/s42242-019-00033-y
Yumoto M, Hemmi N, Sato N, et al., 2020. Evaluation of the effects of cell-dispensing using an inkjet-based bioprinter on cell integrity by RNA-seq analysis. Scientific Reports, 10(1):7158. https://doi.org/10.1038/s41598-020-64193-z
Zhang B, He JK, Li X, et al., 2016. Micro/nanoscale electrohydrodynamic printing: from 2D to 3D. Nanoscale, 8(34): 15376–15388. https://doi.org/10.1039/C6NR04106J
Zhang B, Gao L, Ma L, et al., 2019. 3D bioprinting: a novel avenue for manufacturing tissues and organs. Engineering, 5(4):777–794. https://doi.org/10.1016/j.eng.2019.03.009
Zhang YS, Khademhosseini A, 2020. Engineering in vitro human tissue models through bio-design and manufacturing. Bio-Design and Manufacturing, 3:155–159. https://doi.org/10.1007/s42242-020-00080-w
Zhao DK, Zhou HZ, Wang YF, et al., 2021. Drop-on-demand (DOD) inkjet dynamics of printing viscoelastic conductive ink. Additive Manufacturing, 48:102451. https://doi.org/10.1016/j.addma.2021.102451
Zhou HZ, Liu P, Gao ZQ, et al., 2022. Simultaneous multimaterial multimethod bioprinting. Bio-Design and Manufacturing, 5:433–436. https://doi.org/10.1007/s42242-022-00203-5
Zhu W, Ma XY, Gou ML, et al., 2016. 3D printing of functional biomaterials for tissue engineering. Current Opinion in Biotechnology, 40:103–112. https://doi.org/10.1016/j.copbio.2016.03.014
Acknowledgments
This work is supported by the Starry Night Science Fund of Zhejiang University Shanghai Institute for Advanced Study (No. SN-ZJU-SIAS-004) and the National Natural Science Foundation of China (No. 52075482).
Author information
Authors and Affiliations
Corresponding author
Additional information
Author contributions
Deng-ke ZHAO and Jun YIN designed the research. Deng-ke ZHAO and He-qi XU wrote the first draft of the manuscript. Jun YIN and Hua-yong YANG helped to organize the manuscript. He-qi XU revised and edited the final version. All the authors have approved the final manuscript.
Conflict of interest
Deng-ke ZHAO, He-qi XU, Jun YIN, and Hua-yong YANG declare that they have no conflict of interest.
Rights and permissions
About this article
Cite this article
Zhao, Dk., Xu, Hq., Yin, J. et al. Inkjet 3D bioprinting for tissue engineering and pharmaceutics. J. Zhejiang Univ. Sci. A 23, 955–973 (2022). https://doi.org/10.1631/2023.A2200569
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1631/2023.A2200569