Abstract
Mesa and planar geometry GaN Schottky rectifiers were fabricated on 3-12µm thick epitaxial layers. In planar diodes utilizing resistive GaN, a reverse breakdown voltage of 3.1 kV was achieved in structures containing p-guard rings and employing extension of the Schottky contact edge over an oxide layer. In devices without edge termination, the reverse breakdown voltage was 2.3 kV. Mesa diodes fabricated on conducting GaN had breakdown voltages in the range 200-400 V, with on-state resistances as low as 6m Ωcm−2.
Similar content being viewed by others
References
M.S. Shur, “GaN-Based Transistors for High Power Applications,” Solid-State Electronics 42, 2119 (1998).
J.-I. Chyi, C.-M. Lee, C.-C. Chuo, G.C. Chi, G.T. Dang, A.P. Zhang, F. Ren, X.A. Cao, S.J. Pearton, S.N.G. Chu and R.G. Wilson, “Growth and Device Performance of GaN Schottky Rectifiers,” MRS Internet J. Nitride Semicond. Res. 4, 8 (1999).
Z.Z. Bandic, D.M. Bridger, E.C. Piquette, T.C. McGill, R.P. Vaudo, V.M. Phanse and J.M. Redwing, “High Voltage (450 V) GaN Schottky Rectifiers,” Appl. Phys. Lett. 74, 1266 (1999).
M. Trivedi and K. Shenai, “Performance Evaluation of High Power, Wide Bandgap Semiconductor Rectifiers,” J. Appl. Phys. 85, 6880 (1999).
V.A. Dmitriev, K.G. Irvine, C.H. Carter Jr., N.I. Kuznetsov and E.V. Kalinina, “Electric Breakdown in GaN p-n Junctions,” Appl. Phys. Lett. 68, 229 (1996).
S.J. Pearton, J.C. Zolper, R.J. Shul and F. Ren, “GaN: Processing, Defects and Devices,” J. Appl. Phys. 86, 1 (1999).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Zhang, A.P., Dang, G.T., Cao, X.A. et al. Processing and Device Performance of GaN Power Rectifiers. MRS Online Proceedings Library 595, 1167 (1999). https://doi.org/10.1557/PROC-595-F99W11.67
Published:
DOI: https://doi.org/10.1557/PROC-595-F99W11.67