Abstract
We have developed and used a simple lithographic technique that allows preparation of TEM sections from a variety of materials in 10-45 minutes. To obtain TEM sections, 50-5,000 å diameter cylindrical post structures are microfabricated on the surface of the sample using colloidal particles as an etch mask. The technique simultaneously prepares 104 - 108 posts. This not only allows a statistical characterization of sample structure but also provides enough material for studies of the electronic, spectroscopic and chemical properties of edge sites exposed on the post surfaces. These lithographically prepared posts have been used to study the structure of materials as diverse as a layered transition metal chalcogenide catalysts, semi-insulating polysilicon, amorphous semiconductor superlattices, crystalline metallic and semiconductor superlattices, and molecular-scale microporous superlattices.
Similar content being viewed by others
References
H.W. Deckman in Plasma Synthesis and Etching Of Electronic Materials, edited by R. P. H. Chang and B. Abeles (Mater. Res. Soc. Proc. 3, Pittsburgh, Pa 1984 pp. 214–225.
H.W. Deckman and J. Dunsmuir, Appl. Phys. Lett. 41, 377 (1982).
H.W. Deckman, J.H. Dunsmuir, and Sol M. Gruner, J. Vac. Sci. Technol. B7 1832 (1989).
H.W. Deckman and J. Dunsmuir, U. S. Patent 4,407,695 (1983).
J. Dunsmuir, H. Deckman and J.A. McHenry, U. S. Patent 4, 801,476 (1989).
H.W. Deckman and J. Dunsmuir, J. Vac. Soc. Technol. B1, 1109, (1983).
H.W. Deckman, J.H. Dunsmuir, and B. Abeles, Appl. Phys. Lett. 46, 171 (1985).
H.W. Deckman J.H. Dunsmuir and B. Abeles, J. Vac. Soc. Technol. A3, 950 (1985).
C.B. Roxlo, H.W. Deckman, J. Gland, S.D. Cameron, and R.R. Chainelli, Science 235, 1629 (1987).
C.B. Roxlo, H. Deckman, and J.T. Tiedje U. S. Patent 4,867840 (1989).
W. Stober and A. Fink, J. Colloid. Interface Sci. 26, 62 (1968).
B. FegleyJr., E. Barringer, and K. Brown, J. Am. Ceram. Soc. 14, C–113 (1984).
J.Th.G. Overbeek, Adv. In. Colloid and Interface Sci. 15 251 (1982).
Available From: Interfacial Dynamics Corp., Portland OR,; Duke Scientific Palo Alto, CA; or Dow Diagnostics, Indianapolis IND.
R.K. Iler, J. Am. Ceram. Soc. 47, 194 (1964).
R.K. Iler, J. Colloid and Interface Sci. 21, 569 (1966).
R.K. Iler, U. S. Patent 3,485,658 (1969).
J.M.E. Harper, J.J. Cumo, and H.R. Kaufman, J. Vac. Sci. Technol. 21,737 (1982).
C.M. Melliar-Smith and C.J. Mogab in Thin Film Processes edited by J.L. Vossen and W. Kern (Academic Press, New York, 1978).
J.A. Thorton in Deposition Technologies For Films And Coatings by R.F. Bunshaw (Noyes Publications, Park Ridge N.J., 1982).
B. Abeles and T. Tiedje Phys. Rev. Lett. 51, 2003 (1983).
T.D. Moustakas, J.Y. Koo, A. Ozekcin, and J. Scanlon, J. Appl. Phys. 65,4256 (1989).
T.D. Moustakas, J. Scanlon, J.Y. Koo, H.W. Deckman, A. Ozekcin, R. Friedman, and J.A. McHenry, Mat. Sci. and Eng. B (to be published).
C.B. Roxlo, H.W. Deckman, and B. Abeles, Phys. Rev. Lett. 48, 676 (1986).
H.W. Deckman, B. Abeles, J.H. Dunsmuir, C.B. Roxlo, and T.D. Moustakas, MRS Bulletin, 12, 24 (1987).
H.W. Deckman, B. Abeles, J.H. Dunsmuir, C.B. Roxlo, and T. Tiedje, (Mat. Res. Soc. Symp., Pittsburgh PA, 1985) pp. 49–54.
H.W. Deckman and T.D. Moustakas, J. Vac. Sci. Technol. B6, 316 (1988).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Deckman, H.W., Dunsmuir, J.H. Preparation of TEM Sections using Natural Lithography. MRS Online Proceedings Library 199, 289–297 (1990). https://doi.org/10.1557/PROC-199-289
Published:
Issue Date:
DOI: https://doi.org/10.1557/PROC-199-289