Abstract
Wastewater treatment after a waterjet-cutting machine is a very relevant and promising area. The analysis of the advantages and disadvantages of the available technological solutions in the field of cleaning devices was carried out. The features and difficulties of wastewater treatment are considered, and a technological scheme for wastewater treatment after waterjet cutting, as well as the design of a water treatment plant, is proposed.
REFERENCES
V. A. Shmanev et al., Jet Waterjet Processing Sh 71 GTE Parts (Mashinostroenie, Moscow, 1995) [in Russian].
M. P. Zarubin, RF Patent No. 2125970 (10 February 1999).
B. S. Ksenofontov, The Use of a Multi-Stage Flotation Model and the Development of Flotation Combines of the KBS Type for Water Treatment (Mosk. Gos. Tekh. Univ., 2019) [in Russian].
M. P. Zarubin, RF Patent No. 2182117 (10 May 2002).
All-Union Complex Scientific, Res., Design, and Technol. Inst. of Water Supply, Sewerage, Hydraulic Engineering Structures and Engineering Hydrogeology, Design of Facilities for Wastewater Treatment. (Reference Manual for Sanitary Norms and Rules 2.04.03-85) (Stroiizdat, Moscow, 1990) [in Russian].
SP 32.13330.2018. Sewerage. Outdoor Networks and Facilities. (Updated version of Sanitary Norms and Rules 2.04.03-85) (FSUE TsPP, Moscow, 2018) [in Russian].
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The author declares that he has no conflicts of interest.
Additional information
Translated by M. Drozdova
Rights and permissions
About this article
Cite this article
Baurov, A.A. Wastewater Treatment after Waterjet Cutting to Create a Reverse Water Cycle. Polym. Sci. Ser. D 16, 473–476 (2023). https://doi.org/10.1134/S1995421223020053
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421223020053