Abstract
A list of technical requirements for adhesives for attachment of sensors and additional requirements for adhesives for attachment of tensoresistors is presented. A description of some foreign adhesives recommended for attachment of tensoresistors, including high-temperature ones, is given. The possibility of applying adhesives of the VK-9, VK-58, VS-10T-U, VS-350, and VKP-26Ts brands created at the All Russian Scientific Research Institute of Aviation Materials for attachment of tensoresistors instead of using foreign analogs is shown.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
REFERENCES
http://sensor-sms.ru/full-catalogue-2/folder/klei.
https://www.tmljp.ru.
http://mirtenzo.com/articles-tenzo/glue_tenzo/.
N. P. Klokova, Strain Gages: Theory, Calculation Methods, and Advances (Mashinostroenie, Moscow, 1990) [in Russian].
Aviation Materials: Handbook in 13 Volumes, Vol. 10: Adhesives, Sealants, Rubbers, and Hydraulic Fluids, Part 1: Adhesives and Adhesive Prepregs, Ed. by E. N. Kablov (VIAM, Moscow, 2019) [in Russian].
A. P. Petrova and A. A. Donskoi, Adhesive Materials. Sealants: Handbook (NPO “Professional,” St. Petersburg, 2008) [in Russian].
N. F. Lukina, A. P. Petrova, and E. V. Kotova, “Heat-resistant adhesives for thermo- and tensometrics,” Polym Sci., Ser. D 3, 249–251 (2010).
V. V. Antipov, A. P. Petrova, I. A. Kozlov, M. A. Fomina, and I. A. Volkov, “Effect of technological heating and methods of surface preparation for gluing on the mechanical properties of aluminum foil from the AMg2N alloy,” Tr. VIAM, No. 7, 02 (2018). https://doi.org/10.18577/2307-6046-2018-0-7-10-24
N. F. Lukina, A. P. Petrova, R. R. Mukhametov, and A. S. Kogtenkov, “Advances in the field of adhesive materials for aviation purposes,” Aviats. Mater. Tekhnol., Suppl., 452–459 (2017). https://doi.org/10.18577/2071-9140-2017-0-S-452-459
O. V. Shuklina and N. F. Lukina, “Properties of the new heat-resistant glue VS-10T-U,” Klei, Germetiki, Tekhnol., No. 5, 8–9 (2012).
E. N. Kablov, “Innovations of the All-Russian Institute of Aviation Materials (VIAM) as part of implementing the Strategic Directions of Development of Materials and Technologies of Their Processing for the Period up to 2030,” Aviats. Mater. Tekhnol., No. 1, 3–33 (2015). https://doi.org/10.18577/2071-9140-2015-0-1-3-33
E. N. Kablov, “Strategic directions of development of materials and technologies of their processing for the period up to 2030,” Aviats. Mater. Tekhnol., Suppl., 7–17 (2012).
E. N. Kablov, L. V. Chursova, N. F. Lukina, K. E. Kutsevich, E. V. Rubtsova, and A. P. Petrova, “A study of epoxide–polysulfone polymer systems for high-strength adhesives of aviation purpose,” Polym. Sci., Ser. D 10, 225–229 (2017). https://doi.org/10.1134/S1995421217030066
A. P. Petrova and G. V. Malysheva, Glues, Adhesive Binders, and Adhesive Prepregs (Vseross. Inst. Aviats. Mater., Moscow, 2017) [in Russian].
Funding
This study was carried out within the framework of implementation of complex field of research 15.1, “Multifunctional Adhesive Systems (Strategic Lines of Development of Materials and Technologies of Their Treatment for the Period to 2030)” [11–14].
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by Z. Smirnova
Rights and permissions
About this article
Cite this article
Lukina, N.F., Petrova, A.P., Kotova, E.V. et al. Adhesives for High-Temperature Tensometry. Polym. Sci. Ser. D 14, 323–327 (2021). https://doi.org/10.1134/S1995421221030187
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421221030187