Abstract
This paper offers a description of an approach to modeling a synthesized element featuring a complex geometry. Owing to the region under examination being pre-parametrized with parameters of a parallelepiped and a synthesis of three-dimensional elements with a cubic approximation of unknown variables in all three directions of the region under examination and two-dimensional elements with cubic approximation of unknown variables in a thin layer on its edges, one is enabled to obtain high-precision curved aligned finite elements. The synthesized element obtained substantially expands the range of tasks which now may be solved. Specifically, it enables one to calculate the stress—strain state of coated structures, including those with local fibration while also allowing for specific surface properties which differ from the properties of the primary array to be taken into consideration, including the presence of distributed surface features resultant, for instance, from ion implantation, surface treatment and defects. Different cases have been studied to provide illustration for the method, in particular, a calculation of the stress-strain state of a three-layer plate.
Similar content being viewed by others
REFERENCES
S. Ahmad, B. M. Irons, and O. C. Zienkiewicz, ‘‘Analysis of thick and thin shell structures by curved finite elements,’’ Int. J. Num. Meth. Eng. 2, 419–451 (1970).
J. H. Argyris, I. Fried, and D. W. Scarpf, ‘‘The TUBA family of plate elements for the matrix displacement methods,’’ Aeronaut. J. 72 (692), 701–709 (1968).
C. A. Brebbia, Progress in Boundary Element Methods (Springer, New York, 1983).
D. G. Ashwell and R. H. Gallagher, Finite Elements for Thin Shells and Curved Members (Wiley, London, 1976), Vol. 262.
R. H. Gallagher, ‘‘Finite elements representation for thin shell instability analysis,’’ in Buckling of Structures, Proceedings of the Symposium, Cambridge, USA, 1974, pp. 40–51.
T. S. Hudges, M. Cohen, and M. Haroun, ‘‘Reduced and selective integration techniques in the finite element analysis of plates,’’ Nucl. End. Des. 46, 203–222 (1978).
N. Yoshihiro and W. L. Arttnir, ‘‘Vibrations of corner point supported shallow shells of rectangular planform,’’ Earthquake Eng. Struct. Dyn. 12, 651–661 (1984).
O. C. Zienkiewicz, R. L. Taylor, and J. M. Too, ‘‘Reduced integration technique in general analysis of plates and shells,’’ Int. J. Num. Meth. Eng. 3, 275–290 (1971).
A. I. Golovanov, A. V. Pesoshin, and O. N. Tyuleneva, Modern Finite Element Models and Methods for Studies of Thin-Walled Structures (Kazan State Univ., Kazan, 2005) [in Russian].
N. M. Yakupov, The Mechanics of Thin-Walled Structures: History, Diagnostics, Treatment, The Textbook (Kazan. Gos. Arkhit. Konstr. Univ., Kazan, 2020) [in Russian].
M. S. Kornishin, V. N. Paimushin, and V. F. Snigirev, Computational Geometry in Shell Mechanics Problems (Nauka, Moscow, 1989) [in Russian].
N. M. Yakupov, ‘‘One method for calculations of shells of complex geometry,’’ in Research on the Theory of Shells (1984), pp. 4–17 [in Russian].
M. S. Kornishin and N. M. Yakupov, ‘‘Spline version of the finite element method for calculations shells of complex geometry,’’ Prikl. Mekh. 23 (3), 38–44 (1987).
M. S. Kornishin and N. M. Yakupov, ‘‘The calculation of shells of complex geometry in cylindrical coordinates based on the spline version of the FEM,’’ Prikl. Mekh. 25 (8), 53–60 (1989).
R. Z. Dautov, ‘‘An estimation of the accuracy of FEM schemes based on rectangular elements with numerical integration for shells of complex geometry,’’ Issled. Teor. Obolochek, Tr. Semin. 27, 22–36 (1992).
A. I. Golovanov and M. K. Sagdatullin, ‘‘Three-dimensional finite element for calculating thin-walled structures,’’ Uch. Zap. Kazan. Univ., Ser. Fiz. Mat. Nauk 151 (3), 121–129 (2009).
A. P. Kiselev, ‘‘The finite element method in solving three-dimensional problems of the theory of elasticity,’’ Stroit. Mekh. Inzhen. Konstrukts. Sooruzh. 4, 11–17 (2007).
D. V. Berezhnoi, R. L. Fakhrutdinov, and A. K. Habibova, ‘‘Universal finite element calculation of laminated thin-walled structures of complex geometry,’’ in Proceedings of the 10th International Conference on Mesh Methods for Boundary Value Problems and Applications (2014), pp. 139–147.
A. D. Matveev, ‘‘Multigrid method for finite element calculations of composite shells of revolution and the double curvature,’’ Bull. KrasGAU 3, 126–137 (2018).
N. M. Yakupov, H. G. Kiyamov, S. N. Yakupov, and I. H. Kiyamov, ‘‘Modeling of structural elements of complex geometry with three-dimensional finite elements,’’ Mekh. Kompoz. Mater. Strukt. 17 (1), 145–154 (2011).
N. M. Yakupov, H. G. Kiyamov, and S. N. Yakupov, ‘‘Modelling of cyclic shells with complex geometry three-dimensional finite elements,’’ J. Phys.: Conf. Ser. 1158, 042038 (2019).
Author information
Authors and Affiliations
Corresponding authors
Additional information
(Submitted by D. A. Gubaidullin)
Rights and permissions
About this article
Cite this article
Yakupov, S.N., Kiyamov, H.G. & Yakupov, N.M. Modeling a Synthesized Element of Complex Geometry Based upon Three-Dimensional and Two-Dimensional Finite Elements. Lobachevskii J Math 42, 2263–2271 (2021). https://doi.org/10.1134/S1995080221090316
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995080221090316