Abstract
The effect of severe plastic deformation and the subsequent impact of high hydrostatic pressure on the elastic and microplastic properties of Cu–0.2 wt % Zr alloy has been studied and analyzed. The influence of nanoporosity, which is formed in the process of equal-channel angular pressing and is fixed by applying hydrostatic pressure, has been evaluated.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1134%2FS1063784219100098/MediaObjects/11454_2019_3338_Fig1_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1134%2FS1063784219100098/MediaObjects/11454_2019_3338_Fig2_HTML.gif)
Similar content being viewed by others
REFERENCES
M. Segal, A. E. Reznikov, and V. I. Kopylov, Izv. Akad. Nauk SSSR, Met. 1, 113 (1981).
H. Gleiter, Prog. Mater. Sci. 33, 233 (1989).
M. J. Zeheibauer and Y. T. Zhu, Bulk Nanostructure Materials (Wiley, Weinheim, 2009).
R. Z. Valiev and G. V. Aleksandrov, Nanostructured Materials Produced by Intense Plastic Deformation (Logos, Moscow, 2000).
R. A. Andrievski and A. M. Glezer, Phys.-Usp. 52, 315 (2009).
B. K. Kardashev, V. I. Betekhtin, and M. V. Narykova, Tech. Phys. 60, 1829 (2015). https://doi.org/10.1134/S1063784215120063
B. K. Kardashev, V. I. Betekhtin, A. G. Kadomtsev, M. V. Narykova, Y. R. Kolobov, Tech. Phys. 62, 1372 (2017). https://doi.org/10.1134/S1063784217090110
Y. R. Kolobov, Nanotechnol. Russ. 11, 758 (2009).
B. K. Kardashev, K. V. Sapozhnikov, V. I. Betekhtin, A. G. Kadomtsev, and M. V. Narykova, Phys. Solid State 59, 2381 (2017). https://doi.org/10.1134/S1063783417120204
V. I. Betekhtin, A. G. Kadomtsev, V. Sklenicka, and I. Saxl, Phys. Solid State 49, 1874 (2007). https://doi.org/10.1134/S1063783407100101
J. Dvorak, V. Sklenicka, V. I. Betekhtin, A. G. Kadomtsev, P. Kral, and M. Svoboda, Mater. Sci. Eng., A 584, 103 (2013). https://doi.org/10.1016/j.msea.2013.07.018
S. P. Nikanorov and B. K. Kardashev, Elasticity and Dislocation Inelasticity of Crystals (Nauka, Moscow, 1985).
G. Gremaud, Mater. Sci. Forum 178, 366 (2001).
V. M. Chernov, B. K. Kardashev, L. M. Krjukova, L. I. Mamaev, O. A. Plaksin, A. E. Rusanov, M. I. Solonin, V. A. Stepanov, S. N. Votinov, and L. P. Zavialski, J. Nucl. Mater. 257, 263 (1998).
B. K. Kardashev, O. A. Plaksin, V. A. Stepanov, and V. M. Chernov, Phys. Solid State 46, 1449 (2004). https://doi.org/10.1134/1.1788777
V. I. Betekhtin, V. Sklenicka, I. Saxl, B. K. Kardashev, A. G. Kadomtsev, and M. V. Narykova, Phys. Solid State 52, 1629 (2010). https://doi.org/10.1134/S1063783410080111
V. I. Betekhtin, A. G. Kadomtsev, and B. K. Kardashev, Phys. Solid State 48, 1506 (2006). https://doi.org/10.1134/S1063783406080142
ACKNOWLEDGMENTS
The authors wish to thank V. Sklenicka and his colleagues at the Institute of Physics of Materials (Brno, Czech Republic) for providing Cu–Zr alloy preforms subjected to thermal treatment and ECAE.
Funding
The study was supported by the Russian Foundation for Basic Research (project no. 18-08-00360).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by N. Petrov
Rights and permissions
About this article
Cite this article
Kardashev, B.K., Betekhtin, V.I., Narykova, M.V. et al. The Effect of Equal Channel Angular Extrusion and Hydrostatic Pressure on the Elastic and Microplastic Properties of a Cu–0.2 wt % Zr Alloy. Tech. Phys. 64, 1480–1483 (2019). https://doi.org/10.1134/S1063784219100098
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1063784219100098