Abstract
The fault pattern of rolling bearing usually is unknown in heavy noise background, which means the bearing has two possibilities of single part and compound fault. A new diagnosis method of bearing unknown fault is proposed, which can adaptively diagnose the bearing unknown fault with single part or multi-site. The ensemble empirical mode decomposition with the decomposition cut-off frequency is used to decompose noisy signals. Combined with the sample entropy index, a target frequency band screening criterion is structured to select the target frequency band that contains the potentially fault feature. Meanwhile, the advantage of sample entropy in anti-noise interference is analyzed. Subsequently, the spectral magnification is designed as the quantitative indicator to get the optimal system output of target frequency band when the fault frequency is unknown. Finally, the resonance factor is designed to eliminate the false fault caused by coherence resonance. The feasibility of the proposed approach is confirmed with both simulated and experimental signals.
REFERENCES
Li, X., Yu, K., Ma, H., Cao, L., Luo, Z., Li, H., and Che, L., Analysis of varying contact angles and load distributions in defective angular contact ball bearing, Eng. Fail. Anal., 2018, vol. 91, pp. 449–464. https://doi.org/10.1016/j.engfailanal.2018.04.050
Jiang, X., Cheng, X., Shi, J., Huang, W., Shen, C., and Zhu, Z., A new l0-norm embedded MED method for roller element bearing fault diagnosis at early stage of damage, Measurement, 2018, vol. 127, pp. 414–424. https://doi.org/10.1016/j.measurement.2018.06.016
Li, Y., Liang, X., Xu, M., and Huang, W., Early fault feature extraction of rolling bearing based on ICD and tunable Q-factor wavelet transform, Mech. Syst. Signal Process., 2017, vol. 86, pp. 204–223. https://doi.org/10.1016/j.ymssp.2016.10.013
Pan, Z., Meng, Z., Chen, Z., Gao, W., and Shi, Y., A two-stage method based on extreme learning machine for predicting the remaining useful life of rolling-element bearings, Mech. Syst. Signal Process., 2020, vol. 144, p. 106899. https://doi.org/10.1016/j.ymssp.2020.106899
He, Q., Wu, E., and Pan, Y., Multi-scale stochastic resonance spectrogram for fault diagnosis of rolling element bearings, J. Sound Vib., 2018, vol. 420, pp. 174–184. https://doi.org/10.1016/j.jsv.2018.01.001
Li, B., Li, J., and He, Z., Fault feature enhancement of gearbox in combined machining center by using adaptive cascade stochastic resonance, Sci. Chin. Technol. Sci., 2011, vol. 54, pp. 3203–3210. https://doi.org/10.1007/s11431-011-4612-9
Li, Y., Xu, M., Wei, Y., and Huang, W., A new rolling bearing fault diagnosis method based on multiscale permutation entropy and improved support vector machine based binary tree, Measurement, 2016, vol. 77, pp. 80–94. https://doi.org/10.1016/j.measurement.2015.08.034
Tyagi, S. and Panigrahi, S.K., A DWT and SVM based method for rolling element bearing fault diagnosis and its comparison with Artificial Neural Networks, J. Appl. Comput. Mech., 2017, vol. 3, pp. 80–91. https://doi.org/10.22055/jacm.2017.21576.1108
Udmale, S.S. and Singh, S.K., Application of spectral kurtosis and improved extreme learning machine for bearing fault classification, IEEE Trans. Instrum., 2019, vol. 68, pp. 4222–4233. https://doi.org/10.1109/TIM.2018.2890329
Al-Raheem, K.F., Roy, A., Ramachandran, K.P., Harrison, D.K., and Grainger, S., Application of the Laplace-wavelet combined with ANN for rolling bearing fault diagnosis, J. Vib. Acoust., 2008, vol. 130, p. 051007. https://doi.org/10.1115/1.2948399
Ali, J.B., Fnaiech, N., Saidi, L., Chebel-Morello, B., and Fnaiech, F., Application of empirical mode decomposition and artificial neural network for automatic bearing fault diagnosis based on vibration signals, Appl. Acoust., 2015, vol. 89, pp. 16–27. https://doi.org/10.1016/j.apacoust.2014.08.016
Wang, F., Jiang, H.K., Shao, H.D., Duan, W.J., and Wu, S.P., An adaptive deep convolutional neural network for rolling bearing fault diagnosis, Meas. Sci. Technol., 2017, vol. 28, p. 095005. https://doi.org/10.1088/1361-6501/aa6e22
Zhang, W., Jia, M.P., Zhu, L., and Yan, A., Comprehensive overview on computational intelligence techniques for machinery condition monitoring and fault diagnosis, Chin. J. Mech. Eng., 2017, vol. 30, pp. 782–795. https://doi.org/10.1007/s10033-017-0150-0
Boutros, T. and Liang, M., Detection and diagnosis of bearing and cutting tool faults using hidden Markov models, Mech. Syst. Signal Process., 2011, vol. 25, pp. 2102–2124. https://doi.org/10.1016/j.ymssp.2011.01.013
Purushotham, V., Narayanan, S., and Prasad, S.A., Multi-fault diagnosis of rolling bearing elements using wavelet analysis and hidden Markov model based fault recognition, NDT & E Int., 2005, vol. 38, pp. 654–664. https://doi.org/10.1016/j.ndteint.2005.04.003
Berredjem, T. and Benidir, M., Bearing faults diagnosis using fuzzy expert system relying on an improved range overlaps and similarity method, Expert Syst. Appl., 2018, vol. 108, pp. 134–142. https://doi.org/10.1016/j.eswa.2018.04.025
Sun, J., Yan, C., and Wen, J., Intelligent bearing fault diagnosis method combining compressed data acquisition and deep learning, IEEE Trans. Instrum., 2017, vol. 67, pp. 185–195. https://doi.org/10.1109/TIM.2017.2759418
Žvokelj, M., Zupan, S., and Prebil, I., EEMD-based multiscale ICA method for slewing bearing fault detection and diagnosis, J. Sound Vib., 2016, vol. 370, pp. 394–423. https://doi.org/10.1016/j.jsv.2016.01.046
Wu, Z. and Huang, N.E., Ensemble empirical mode decomposition: a noise-assisted data analysis method, Adv. Adapt. Data Anal., 2009, vol. 1, pp. 1–41. https://doi.org/10.1142/S1793536909000047
He, W., Jiang, Z.N., and Feng, K., Bearing fault detection based on optimal wavelet filter and sparse code shrinkage, Measurement, 2009, vol. 42, pp. 1092–1102. https://doi.org/10.1016/j.measurement.2009.04.001
Huang, N.E., Shen, Z., Long, S.R., Wu, M.C., Shih, H.H., Zheng, Q., and Liu, H.H., The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis, Proc. Math. Phys. Eng. Sci., 1998, vol. 454, pp. 903–995. https://doi.org/10.1098/rspa.1998.0193
Guo, W., Peter, W.T., and Djordjevich, A., Faulty bearing signal recovery from large noise using a hybrid method based on spectral kurtosis and ensemble empirical mode decomposition, Measurement, 2012, vol. 45, pp. 1308–1322. https://doi.org/10.1016/j.measurement.2012.01.001
Lei, Y., He, Z., and Zi, Y., Application of the EEMD method to rotor fault diagnosis of rotating machinery, Mech. Syst. Signal Process., 2009, vol. 23, pp. 1327–1338. https://doi.org/10.1016/j.ymssp.2008.11.005
Wei, M.H., Jiang, L.X., Zhang, D., Wang, B., Tu, F.M., and Jiang, P.B., Bearing fault feature extraction method based on variational mode decomposition of fractional fourier transform, Russ. J. Nondestr. Test., 2022, vol. 58, pp. 221–235. https://doi.org/10.1134/S1061830922030056
Wang, D., Peter, W.T., and Tsui, K.L., An enhanced Kurtogram method for fault diagnosis of rolling element bearings, Mech. Syst. Signal Process., 2013, vol. 35, pp. 176–199. https://doi.org/10.1016/j.ymssp.2012.10.003
Hu, Y., Zhang, S., Jiang, A., Zhang, L., Jiang, W., and Li, J., A new method of wind turbine bearing fault diagnosis based on multi-masking empirical mode decomposition and fuzzy C-means clustering, Chin. J. Mech. Eng., 2019, vol. 32, pp. 1–12. https://doi.org/10.1186/s10033-019-0356-4
Huang, H., Li, K., Su, W., Bai, J., Xue, Z., Zhou, L., and Pecht, M., An improved empirical wavelet transform method for rolling bearing fault diagnosis, Sci. China Technol. Sci., 2020, vol. 63, pp. 2231–2240. https://doi.org/10.1007/s11431-019-1522-1
Kappaganthu, K. and Nataraj, C., Feature selection for fault detection in rolling element bearings using mutual information, J. Vib. Acoust., 2011, vol. 133, p. 061001. https://doi.org/10.1115/1.4003400
Huo, Z., Martínez-García, M., Zhang, Y., Yan, R., and Shu, L., Entropy measures in machine fault diagnosis: Insights and applications, IEEE Trans. Instrum., 2020, vol. 69, pp. 2607–2620. https://doi.org/10.1109/TIM.2020.2981220
Li, Y., Wang, X., Liu, Z., Liang, X., and Si, S., The entropy algorithm and its variants in the fault diagnosis of rotating machinery: A review, IEEE Access, 2018, vol. 6, pp. 66723–66741. https://doi.org/10.1109/ACCESS.2018.2873782
Richman, J.S. and Moorman, J.R., Physiological time-series analysis using approximate entropy and sample entropy, Am. J. Physiol.-Heart. C, 2000, vol. 278, pp. 2039–2049. https://doi.org/10.1152/ajpheart.2000.278.6.H2039
Pincus, S.M., Approximate entropy as a measure of system complexity, Proc. Natl. Acad. Sci., 1991, vol. 88, pp. 2297–2301. https://doi.org/10.1073/pnas.88.6.2297
Han, M. and Pan, J., A fault diagnosis method combined with LMD, sample entropy and energy ratio for roller bearings, Measurement, 2015, vol. 76, pp. 7–19. https://doi.org/10.1016/j.measurement.2015.08.019
Ning, S., Han, Z., Wang, Z., and Wu, X., Application of sample entropy based LMD-TFPF de-noising algorithm for the gear transmission system, Entropy, 2016, vol. 18, p. 414. https://doi.org/10.3390/e18110414
Ni, Q., Feng, K., Wang, K., Yang, B., and Wang, Y., A case study of sample entropy analysis to the fault detection of bearing in wind turbine, Case Stud. Eng. Fail. Anal., 2017, vol. 9, pp. 99–111. https://doi.org/10.1016/j.csefa.2017.10.002
Benzi, R., Sutera, A., and Vulpiani, A., The mechanism of stochastic resonance, J. Phys. A: Math. Gen., 1981, vol. 14, pp. L453–L457. https://doi.org/10.1088/0305-4470/14/11/006
Liu, R.N. and Kang, Y. M., Stochastic resonance in underdamped periodic potential systems with alpha stable Lévy noise, Phys. Lett. A, 2018, vol. 382, pp. 1656–1664. https://doi.org/10.1016/j.physleta.2018.03.054
Zhang, X., Hu, N., Hu, L., and Cheng, Z., Multi-scale bistable stochastic resonance array: A novel weak signal detection method and application in machine fault diagnosis, Sci. Chin. Technol. Sci., 2013, vol. 56, pp. 2115–2123. https://doi.org/10.1007/s11431-013-5246-x
Lu, S., He, Q., and Wang, J., A review of stochastic resonance in rotating machine fault detection, Mech. Syst. Signal Process., 2019, vol. 116, pp. 230–260. https://doi.org/10.1016/j.ymssp.2018.06.032
Li, Z., Liu, X., Han, S., Wang, J., and Ren, X., Fault diagnosis method and application based on unsaturated piecewise linear stochastic resonance, Rev. Sci. Instrum., 2019, vol. 90, p. 065112. https://doi.org/10.1063/1.5083990
Yang, C., Yang, J., Zhu, Z., Shen, G., and Zheng, Y., Distinguish coherence resonance and stochastic resonance in bearing fault evaluation, Meas. Sci. Technol., 2020, vol. 31, p. 045001. https://doi.org/10.1088/1361-6501/ab50aa
Gang, H., Ditzinger, T., Ning, C.Z., and Haken, H., Stochastic resonance without external periodic force, Phys. Rev. Lett., 1993, vol. 71, p. 807. https://doi.org/10.1103/PhysRevLett.71.807
Lu, J., Huang, M., and Yang, J.J., A novel spectrum sensing method based on tri-stable stochastic resonance and quantum particle swarm optimization, Wirel. Pers. Commun., 2017, vol. 95, pp. 2635–2647. https://doi.org/10.1007/s11277-017-3945-5
Wang, Y., Yang, L., **ang, J., Yang, J., and He, S., A hybrid approach to fault diagnosis of roller bearings under variable speed conditions, Meas. Sci. Technol., 2017, vol. 28, p. 125104. https://doi.org/10.1088/1361-6501/aa9460
Funding
This research was supported by National Natural Science Foundation of China (grant no. 12072362) and the Priority Academic Program Development of Jiangsu Higher Education Institutions.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Rights and permissions
About this article
Cite this article
Yang, C., Wang, Z., Gong, T. et al. Unknown Bearing Fault Recognition in Strong Noise Background. Russ J Nondestruct Test 59, 560–582 (2023). https://doi.org/10.1134/S1061830923600016
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1061830923600016