Abstract
Results of an experimental-theoretical study of spallation in synthetic diamonds are presented. In this study, data were first obtained on dynamic tensile strength of poly- and singlecrystal diamond samples at mechanical loads of up to 0.34 TPa and strain rates of 10–100 µs−1. Shock-wave loading was performed by 70 ps laser pulses on a Kamerton-T facility using a Nd:glass laser (second harmonics λ = 527 nm, pulse energy of up to ≈3 J) at intensities of ≈8 TW/cm2. The obtained maximal value of the spall strength ≈16.4 GPa is 24% of the theoretical ultimate strength of diamond. Raman scattering experiments showed that a small amount of diamond was graphitized in the spall area on the backside of the sample.
Similar content being viewed by others
References
B. V. Spitsyn, L. L. Bouilov, and B. V. Derjaguin, “Vapor Growth of Diamond on Diamond and Other Surfaces,” J. Cryst. Growth. 52, 219–226 (1981).
R. S. Balmer, J. R. Brandon, S. L. Clewes, et al., “Chemical Vapour Deposition Synthetic Diamond: Materials, Technology and Applications,” J. Phys.: Condens. Matter. 21, 364221 (2009).
G. I. Kanel’, S. V. Razorenov, A. V. Utkin, and V. E. Fortov, Shock-Wave Phenomena in Condensed Media (Yanus-K, Moscow, 1996) [in Russian].
H. Nagao, K. G. Nakamura, K. Kondo, et al., “Hugoniot Measurement of Diamond under Laser Shock Compression up to 2 TPa,” Phys. Plasmas 13, 052705 (2006).
Ya. B. Zel’dovich and Yu. P. Raizer, Physics of Shock Waves and High-Temperature Hydrodynamic Phenomena (Nauka, Moscow, 1966; Academic Press, New York, 1967).
G. I. Kanel’, V. E. Fortov, and S. V. Razorenov, “Shock Waves in Condensed-State Physics,” Usp. Fiz. Nauk 177(8), 809–830 (2007).
A. A. Geras’kin, K. V. Khishchenko, I. K. Krasyuk, et al., “Specific Features of Spallation Processes in Polymethyl Methacrylate under High Strain Rate,” Contrib. Plasma Phys. 49, 451–454 (2009).
S. A. Abrosimov, A. P. Bazhulin, V. V. Voronov, et al., “Mechanical Properties of Aluminum, AMg6M Alloy, and Polymethyl Methacrylate at High Strain Rates under the Action of Picosecond Laser Radiation,” Dokl. Akad. Nauk 442(6), 752–754 (2012).
S. A. Abrosimov, A. P. Bazhulin, V. V. Voronov, et al., “Specific Features of the Behavior of Targets under Negative Pressures Created by a Picosecond Laser Pulse,” Kvant Elektron. 43(3), 246–251 (2013).
S. I. Ashitkov, M. B. Agranat, G. I. Kanel’, et al., “Behavior of Aluminum Near the Ultimate Theoretical Strength in Experiments with Femtosecond Laser Pulses,” Pis’ma Zh. Eksp. Teor. Fiz. 92(8), 568–573 (2010).
S. I. Ashitkov, P. S. Komarov, M. B. Agranat, et al., “Achievement of the Ultimate Bulk and Shear Strengths of Iron Irradiated by Femtosecond Laser Pulses,” Pis’ma Zh. Eksp. Teor. Fiz. 98(7), 439–444 (2013).
V. G. Ralchenko, E. Pleuler, F. X. Lu, et al. “Fracture Strength of Optical Quality and Black Polycrystalline CVD Diamonds,” Diamond Related Materials 23, 172–177 (2012).
R. G. McQueen and D. March, “Ultimate Yield Strength of Copper,” J. Appl. Phys. 33, 654–665 (1962).
A. G. Kulikovskii, N. V. Pogorelov, and A. Yu. Semenov, Mathematical Problems of Numerical Solution of Hyperbolic Systems of Equations (Fizmatlit, Moscow, 2012) [in Russian].
I. V. Lomonosov, V. E. Fortov, and K. V. Khishchenko, “A Model of Wide-Range Equations of State for Polymer Materials at High Energy Densities,” Khim. Fiz. 14(1), 47–52 (1995).
V. I. Vovchenko, I. K. Krasyuk, P. P. Pashinin, and A. Yu. Semenov, “Wide-Range Dependence of Ablation Pressure on Laser Radiation Intensity,” Dokl. Akad. Nauk 338(3), 322–324 (1994).
S. A. Abrosimov, A. P. Bazhulin, A. P. Bol’shakov, et al., “Experimental Investigation of Polycrystalline and Single-Crystal Diamonds at Negative Pressures Produced by Picosecond Laser Pulses,” Dokl. Akad. Nauk 457(1), 41–44 (2014).
S. A. Abrosimov, A. P. Bazhulin, A. P. Bol’shakov, et al., “Generation of Negative Pressures and Spallation Phenomena in Diamond Exposed to a Picosecond Laser Pulse,” Kvant. Elektron. 44(6), 530–534 (2014).
T. V. Kononenko, V. G. Ralchenko, I. I. Vlasov, et al., “Ablation of CVD Diamond with Nanosecond Laser Pulses of UV-IR Range,” Diamond Related Materials 7, 1623–1627 (1998).
V. D. Andreev, “Spontaneous Graphitization and Thermal Disintegration of Diamond at T > 2000 K,” Fiz. Tverd. Tela 41(4), 695–701 (1999).
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.A. Abrosimov, A.P. Bazhulin, A.P. Bolshakov, V.I. Konov, I.K. Krasiuk, P.P. Pashinin, V.G. Ralchenko, A.Yu. Semenov, D.N. Sovyk, I.A. Stuchebryukhov, V.E. Fortov, K.V. Khishchenko, A.A. Khomich.
__________
Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 56, No. 1, pp. 171–179, January–February, 2015.
Rights and permissions
About this article
Cite this article
Abrosimov, S.A., Bazhulin, A.P., Bolshakov, A.P. et al. Strength of synthetic diamonds under tensile stresses produced by picosecond laser action. J Appl Mech Tech Phy 56, 143–149 (2015). https://doi.org/10.1134/S0021894415010216
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0021894415010216