Abstract
In the present investigation, the machinability and rheological properties of the modified vegetable oils like pongam (Pongamia pinnata), jatropha (Jatropha curcas), neem (Azadirachta indica), and mahua (Madhuca indica) are carried out. Experiments are conducted by applying prepared oils for turning and drilling of AA 6061 aluminum alloy and AISI 304L stainless steel as cutting fluids. Tool flank wear, cutting force, and surface roughness are evaluated using mineral, raw, and modified vegetable oils. The fatty acid composition and results of the copper corrosion test for all vegetable oils show that they are better candidates for cutting fluid formulation than mineral oil. The results indicate lower coefficient of friction and better surface roughness values for vegetable oils in contrast with mineral oil. Finally, it can be concluded that a lesser environmental impact and satisfactory metal cutting performance can be achieved using a vegetable oil-based metal cutting fluids.
Similar content being viewed by others
References
Avila R, Abrao A (2001) The effect of cutting fluids on the machining of hardened AISI 4340 steel. J Mater Process Technol 119(1–3):21–26
Gajrani KK et al (2019) Hard machining performance of indigenously developed green cutting fluid using flood cooling and minimum quantity cutting fluid. Journal of cleaner production 206:108–123
Jeevan, T. and S. Jayaram, Studies on tribological and metal forming performance of vegetable oil-based lubricants, in advances in materials and manufacturing engineering. 2020, Springer, NewYork
Gajrani KK et al (2019) Thermal, rheological, wettability and hard machining performance of MoS2 and CaF2 based minimum quantity hybrid nano-green cutting fluids. J Mater Process Technol 266:125–139
Li F, Hanson M, Larock R (2001) Soybean oil–divinylbenzene thermosetting polymers: synthesis, structure, properties and their relationships. Polymer 42(4):1567–1579
Jeevan, T. and S. Jayaram, (2018) Performance evaluation of jatropha and pongamia oil based environmentally friendly cutting fluids for turning AA 6061. Adv Tribol. https://doi.org/10.1155/2018/2425619
Puttaswamy, Jeevan Tamalapura, and Jayaram Saligrama Ramachandra. (2018) "Experimental investigation on the performance of vegetable oil based cutting fluids in drilling AISI 304L using Taguchi technique." Tribol Online 13.2: 50–56.
Nagendramma P, Kaul S (2012) Development of ecofriendly/biodegradable lubricants: an overview. Renew Sustain Energy Rev 16(1):764–774
Cetin MH et al (2011) Evaluation of vegetable based cutting fluids with extreme pressure and cutting parameters in turning of AISI 304L by Taguchi method. J Clean Prod 19(17–18):2049–2056
Gajrani KK, Ram D, Sankar MR (2017) Biodegradation and hard machining performance comparison of eco-friendly cutting fluid and mineral oil using flood cooling and minimum quantity cutting fluid techniques. J clean prod 165:1420–1435
Rapeti P et al (2018) Performance evaluation of vegetable oil based nano cutting fluids in machining using grey relational analysis-A step towards sustainable manufacturing. J clean prod 172:2862–2875
Marques A et al (2019) Turning of Inconel 718 with whisker-reinforced ceramic tools applying vegetable-based cutting fluid mixed with solid lubricants by MQL. J Mater Process Technol 266:530–543
Sharma J, Sidhu BS (2014) investigation of effects of dry and near dry machining on AISI D2 steel using vegetable oil. J clean prod 66:619–623
Chinchanikar S et al (2014) Comparative evaluations of surface roughness during hard turning under dry and with water-based and vegetable oil-based cutting fluids. Procedia Mat Sci 5:1966–1975
Khan M, Dhar N (2006) Performance evaluation of minimum quantity lubrication by vegetable oil in terms of cutting force, cutting zone temperature, tool wear, job dimension and surface finish in turning AISI-1060 steel. J Zhejiang Univ-Sci A 7(11):1790–1799
Khan M, Mithu M, Dhar NR (2009) Effects of minimum quantity lubrication on turning AISI 9310 alloy steel using vegetable oil-based cutting fluid. J Mater Process Technol 209(15–16):5573–5583
Krishna PV, Srikant R, Rao DN (2010) Experimental investigation on the performance of nanoboric acid suspensions in SAE-40 and coconut oil during turning of AISI 1040 steel. Int J Mach Tools Manuf 50(10):911–916
Ozcelik B et al (2011) Experimental investigations of vegetable based cutting fluids with extreme pressure during turning of AISI 304L. Tribol Int 44(12):1864–1871
Pereira O, Martín-Alfonso JE, Rodríguez A, Calleja A, Fernández-Valdivielso A, de Lacalle LL (2017) Sustainability analysis of lubricant oils for minimum quantity lubrication based on their tribo-rheological performance. J Clean Prod 164:1419–1429
Kamata Y, Obikawa T (2007) High speed MQL finish-turning of Inconel 718 with different coated tools. J Mater Process Technol 192:281–286
Sreejith PS (2008) Machining of 6061 aluminium alloy with MQL, dry and flooded lubricant conditions. Mater Lett 62(2):276–278
Talib N, Rahim EA (2018) Performance of modified jatropha oil in combination with hexagonal boron nitride particles as a bio-based lubricant for green machining. Tribol Int 118:89–104
Rapeti P, Pasam VK, Gurram KMR, Revuru RS (2018) Performance evaluation of vegetable oil based nano cutting fluids in machining using grey relational analysis-A step towards sustainable manufacturing. J Clean Prod 172:2862–2875
Mahadi MA, Choudhury IA, Azuddin M, Nukman Y (2017) Use of boric Acid powder aided vegetable oil lubricant in turning AISI 431 Steel. Procedia Engineering 184:128–136
Belluco W, De Chiffre L (2004) Performance evaluation of vegetable-based oils in drilling austenitic stainless steel. J Mater Process Technol 148(2):171–176
Islam M, Uddin M, Alim M, Dhar N. (2009). An experimental investigation of vegetable oil based cutting fluid on drilling medium carbon steel by HSS drill bit. Dhaka ICME2009.
Kuram E, Ozcelik B, Demirbas E, Sik E (2010). Effects of the cutting fluid types and cutting parameters on surface roughness and thrust force. In Proceedings of the world congress on engineering, 2: 978–988
Palanisamy A, Selvaraj T, Sivasankaran S (2018) Optimization of Turning Parameters of Machining Incoloy 800H Superalloy Using Cryogenically Treated Multilayer CVD-Coated Tool. Arabian J Sci Eng 43(9):4977–4990
Palanisamy A, Selvaraj T, Sivasankaran S. Experimental Investigation and Multi-Response Optimization in Turning of Incoloy 800H Superalloy. Archives of Metallurgy and Materials. 2018;63.
Samuel OD, Waheed MA, Taheri-Garavand A, Verma TN, Dairo OU, Bolaji BO, Afzal A. Prandtl number of optimum biodiesel from food industrial waste oil and diesel fuel blend for diesel engine. Fuel.;285:119049.
Samuel OD, Okwu MO, Oyejide OJ, Taghinezhad E, Afzal A, Kaveh M (2020) Optimizing biodiesel production from abundant waste oils through empirical method and grey wolf optimizer. Fuel 1(281):118701
Kumar M, Afzal A, Ramis MK (2017) Investigation of physicochemical and tribological properties of TiO2 nano-lubricant oil of different concentrations. TRIBOLOGIA-Finnish J Tribol 35(3):6–15
Afzal A, Kareemullah M, RK AR (2018) Production of biodiesel from various sources and comparative engine performance studies by using different biodiesel blends. J Eng Research.;6(4).
Pottirayil A, Kailas SV, Biswas SK (2010) Experimental estimation of friction force in lubricated cutting of steel. Wear 269(7–8):557–564
Acknowledgements
The authors extend their appreciation to the Deanship of Scientific Research at King Khalid University, Saudi Arabia for funding this work through Research Group Program under Grant No: R.G.P.1/104/42.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Technical editor Lincoln Cardoso Brandao.
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Jeevan, T.P., Jayaram, S.R., Afzal, A. et al. Machinability of AA6061 aluminum alloy and AISI 304L stainless steel using nonedible vegetable oils applied as minimum quantity lubrication. J Braz. Soc. Mech. Sci. Eng. 43, 159 (2021). https://doi.org/10.1007/s40430-021-02885-x
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s40430-021-02885-x