Abstract
There are significant challenges associated with the settling and filtration of very fine-grained mineral particles. The present work aims at selecting the best dewatering aids that can improve filtration kinetics and filtrate quality (recycled process water) of a uranium ore processing plant. The effect of dewatering aids on slurry rheology and filtration of a calcitic ore containing 61.4% CaCO3 was investigated. The dewatering aids selected were polyacrylamide-based industrial flocculants of nonionic (NPAM-N100) and anionic (APAM- RF8180) type, an anionic surfactant (ASLS-sodium lauryl sulphate), and a nonionic exopolysaccharide surfactant (NEPS-guar gum). The slurry’s rheological behaviour was analyzed with the help of Herschel–Bulkley model. Optimum dosage of flocculant/surfactant was evaluated using rheological parameters. A wide variation in maximum shear stress (19.7–28.1 Pa) and maximum apparent viscosity (0.0141–0.0201 Pa.s) was noted with these dewatering aids at fixed shear rate of 862 s−1 (50% solids (w/w), ambient temperature 30 °C, d90 particle size 53 µm). The NPAM and NEPS gave best flocculation results at an optimum dosage of 90–110 g/t with a corresponding low capillary suction time (CST) and low zeta potential (−19 changed to −1.9 mV with 100 g/t NPAM, N100). An attempt was also made to correlate rheological parameters with CST values. The rheological parameters and zeta potential help in optimizing the dewatering aid dosages for better flocculation and filtration, and thereby reducing the overall production cost.
Graphical Abstract
![](http://media.springernature.com/lw685/springer-static/image/art%3A10.1007%2Fs40033-023-00489-4/MediaObjects/40033_2023_489_Figa_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40033-023-00489-4/MediaObjects/40033_2023_489_Fig1_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40033-023-00489-4/MediaObjects/40033_2023_489_Fig2_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40033-023-00489-4/MediaObjects/40033_2023_489_Fig3_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40033-023-00489-4/MediaObjects/40033_2023_489_Fig4_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40033-023-00489-4/MediaObjects/40033_2023_489_Fig5_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40033-023-00489-4/MediaObjects/40033_2023_489_Fig6_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40033-023-00489-4/MediaObjects/40033_2023_489_Fig7_HTML.png)
Similar content being viewed by others
References
C. Zhao, J. Zhou, Y. Yan, L. Yang, G. **ng, H. Li, P. Wu, M. Wang, H. Zheng, Sci. Total Environ. 765, 142795 (2020). https://doi.org/10.1016/j.scitotenv.2020.142795
Y. Zhang, S. Hu, X. Yang, F. Jiang, C. Wu, J. Li, K. Liu, Colloids Surf. A Physicochem. 630, 127544 (2021). https://doi.org/10.1016/j.colsurfa.2021.127544
V.H. Dao, N.R. Cameron, K. Saito, Polym. Chem. 7, 11 (2016). https://doi.org/10.1039/C5PY01572C
A.S. Patra, D. Makhija, A.K. Mukherjee, R. Tiwari, C.R. Sahoo, B.D. Mohanty, Powder Technol. 287, 43 (2016). https://doi.org/10.1016/j.powtec.2015.09.030
A. Khazaie, M. Mazarji, B. Samali, D. Osborne, T. Minkina, S. Sushkova, S. Mandzieve, A. Soldatov, Water 14, 918 (2022). https://doi.org/10.3390/w14060918
Y. Qi, K.B. Thapa, A.F.A. Hoadley, Chem. Eng. J. 171, 373 (2011). https://doi.org/10.1016/j.cej.2011.04.060
M. Nourani, M. Bagdadi, M. Javan, G.N. Bidhendi, J. Environ. Chem. Eng. 4, 1996 (2016). https://doi.org/10.1016/j.jece.2016.03.028
Y. Guo, F. Kong, P. Fatehi, ACS Omega 5, 21032 (2020). https://doi.org/10.1021/acsomega.0c02598
R.K. Dwari, S.I. Angadi, S.K. Tripathy, Colloids Surf. A Physicochem. 537, 467 (2018). https://doi.org/10.1016/j.colsurfa.2017.10.069
M. Ejtemaei, S. Ramli, D. Osborne, A.V. Nguyen, J. Clean. Prod. 232, 953 (2019). https://doi.org/10.1016/j.jclepro.2019.06.039
E.L. Terechova, G. Zhang, J. Chen, N.A. Sosnina, F. Yang, J. Environ. Chem. Eng. 2, 2111 (2014). https://doi.org/10.1016/j.jece.2014.09.011
J. Gregory, S. Barany, Adv. Colloid Interf. Sci. 169, 1 (2011). https://doi.org/10.1016/j.cis.2011.06.004
Anon, IAEA Technical Report Series No. 359 (Vienna, Austria, 1993).https://www-pub.iaea.org/MTCD/publications/PDF/trs359_web.pdf. Accessed 02 April 2023.
A. Shakeel, Z. Safar, M. Ibanez, L.V. Paassen, C. Chassagne, Minerals 10, 11 (2020). https://doi.org/10.3390/min10110999
M.H. Derkani, A.J. Fletcher, M. Fedorov, W. Abdallah, B. Sauerer, J. Anderson, Z.J. Zhang, Colloids Interf. 3, 62 (2019). https://doi.org/10.3390/colloids3040062
N. Cruz, J. Forster, E.R. Bobicki, Can. J. Chem. Eng. 97, 2102 (2019). https://doi.org/10.1002/cjce.23476
O. Sawalha, M. Scholz, J. Environ. Eng. 136, 983 (2011). https://doi.org/10.1061/(ASCE)EE.1943-7870.0000223
S. Baroutian, N. Eshtiaghi, D.J. Gapes, Bioresour. Technol. 140, 227 (2013). https://doi.org/10.1016/j.biortech.2013.04.114
Y. Kudo, M. Yasuda, S. Matsusaka, Adv. Powder Technol. 31, 121 (2020). https://doi.org/10.1016/j.apt.2019.10.004
H. Koseoglu, N.O. Yigit, G. Civelekoglu, B.I. Harman, M. Kitis, Bioresour. Technol. 117, 48 (2012). https://doi.org/10.1016/j.biortech.2012.04.067
S. Farrokhpay, Miner. Eng. 36, 272 (2012). https://doi.org/10.1016/j.mineng.2012.05.009
L. Wang, C. Li, J. Chem. 3, 1 (2020). https://doi.org/10.1155/2020/3894542
D. Das, S. Pattanaik, P.K. Parhi, R.K. Mohapatra, R.K. Jyothi, J.Y. Lee, H.I. Kim, ACS Omega 4, 21604 (2019). https://doi.org/10.1021/acsomega.9b03477
J. Jiang, Y. Zhou, Environ. Sci. Technol. 54, 5928 (2020). https://doi.org/10.1021/acs.est.0c01123
T. Sreenivas, J.K. Chakravartty, Trans. Indian Inst. Met. 69, 3 (2016). https://doi.org/10.1007/s12666-015-0548-2
M. Serajuddin, K. Anand Rao, T. Sreenivas, Can. Metall. Q. 54, 406 (2015). https://doi.org/10.1080/00084433.2015.1104058
M. Kosmulski, Adv. Colloid Interf. Sci. 296, 102519 (2021). https://doi.org/10.1016/j.cis.2021.102519
Acknowledgements
The authors express sincere thanks to Dr. T. Sreenivas, Head, Mineral Processing Division, and Dr. R. Tewari, Associate Director, Materials Group, BARC, Mumbai for their encouragement and interest during these investigations.
Funding
The authors declare that no funds, grants, or other support were received during the preparation of this manuscript.
Author information
Authors and Affiliations
Contributions
MS provided conceptualization, methodology, investigation, formal analysis, data curation, data analysis, and writing-original draft. ARK did supervision, resources, and writing-review & editing. SM done supervision, project administration, and writing-review & editing.
Corresponding author
Ethics declarations
Conflict of interest
The authors have no relevant financial or non-financial interests to disclose.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Serajuddin, M., Kacham, A.R. & Mukhopadhyay, S. Studies on the Rheological Characteristics of Flocculated Calcitic Ore Slurry. J. Inst. Eng. India Ser. D 105, 413–424 (2024). https://doi.org/10.1007/s40033-023-00489-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40033-023-00489-4