SpringerLink
Log in

Liquid Bridge Stereolithography: A Proof of Concept

  • Short Communication
  • Published:
International Journal of Precision Engineering and Manufacturing Aims and scope Submit manuscript

Abstract

Stereolithography (SL) is an additive manufacturing (AM) process that uses photopolymers for creating a 3D structure that has excellent surface roughness and allows precision fabrication. Nevertheless, the photopolymer used in this process is generally costly, in particular for medical-grade materials, and a relatively large amount of a photopolymer is required within vat that is necessary for this process. To overcome these disadvantages, a liquid bridge of a photopolymer formed between two plates has been suggested as an alternative to using a vat; a liquid bridge requires less photopolymer, resulting in cost savings. The proposed manufacturing platform utilizes Digital Light Processing (DLP) technology and the constrained surface method. Stacking directions using the suggested liquid bridge method have been investigated to evaluate the stability of the process, in which a liquid bridge of a photopolymer is formed between two substrates and a 3D structure is built within the liquid bridge. Finally, several manufacturing examples are introduced to prove the concept of liquid bridge SL and verify its advantage of material savings.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
EUR 32.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or Ebook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

References

  1. Azari, A. and Nikzad, S., “The Evolution of Rapid Prototy** in Dentistry: A Review,” Rapid Prototy** Journal, Vol. 15, No. 3, pp. 216–225, 2009.

    Article  Google Scholar 

  2. Zhou, C., Chen, Y., and Waltz, R. A., “Optimized Mask Image Projection for Solid Freeform Fabrication,” Journal of Manufacturing Science and Engineering, Vol. 131, No. 6, Paper No. 061004, 2009.

    Google Scholar 

  3. Arnold, G., Timilsina, R., Fowlkes, J., Orthacker, A., Kothleitner, G., et al., “Fundamental Resolution Limits during Electron-Induced Direct-Write Synthesis,” ACS Applied Materials & Interfaces, Vol. 6, No. 10, pp. 7380–7387, 2014.

    Article  Google Scholar 

  4. Rahman, T., Renaud, L., Heo, D., Renn, M., and Panat, R., “Aerosol Based Direct-Write Micro-Additive Fabrication Method for Sub-mm 3D Metal-Dielectric Structures,” Journal of Micromechanics and Microengineering, Vol. 25, No. 10, pp. 107002, 2015.

    Article  Google Scholar 

  5. Hribar, K. C., Soman, P., Warner, J., Chung, P., and Chen, S., “Light-Assisted Direct-Write of 3D Functional Biomaterials,” Lab on a Chip, Vol. 14, No. 2, pp. 268–275, 2014.

    Article  Google Scholar 

  6. Dias, A. D., Unser, A. M., Kruger, U., **e, Y., and Corr, D. T., “Laser Direct-Write Patterning Influences Early Embryonic Stem Cell Differentiation,” Proc. of 41st Annual Northeast Biomedical Engineering Conference (NEBEC), pp. 1–2, 2015.

    Google Scholar 

  7. Richard, R. C., Oliveira, R. N., Soares, G. D., and Thiré, R. M., “Direct-Write Assembly of 3D Scaffolds Using Colloidal Calcium Phosphates Inks,” Matéria (Rio de Janeiro), Vol. 19, No. 1, pp. 61–67, 2014.

    Article  Google Scholar 

  8. Zhang, M., Vora, A., Han, W., Wojtecki, R. J., Maune, H., et al., “Dual-Responsive Hydrogels for Direct-Write 3D Printing,” Macromolecules, Vol. 48, No. 18, pp. 6482–6488, 2015.

    Article  Google Scholar 

  9. Lavini, F., Yang, N., Vasudevan, R. K., Strelcov, E., Jesse, S., et al., “Bias Assisted Scanning Probe Microscopy Direct Write Lithography Enables Local Oxygen Enrichment of Lanthanum Cuprates Thin Films,” Nanotechnology, Vol. 26, No. 32, Paper No. 325302, 2015.

    Google Scholar 

  10. Choi, J.-W. and Kim, H.-C., “3D Printing Technologies-A Review,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 3, pp. 1–8, 2015.

    Article  Google Scholar 

  11. Chu, W.-S., Kim, C.-S., Lee, H.-T., Choi, J.-O., Park, J.-I., et al., “Hybrid Manufacturing in Micro/Nano Scale: A Review,” International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 1, No. 1, pp. 75–92, 2014.

    Article  Google Scholar 

  12. Moon, S. K., Tan, Y. E., Hwang, J., and Yoon, Y.-J., “Application of 3D Printing Technology for Designing Light-Weight Unmanned Aerial Vehicle Wing Structures,” International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 1, No. 3, pp. 223–228, 2014.

    Article  Google Scholar 

  13. Yoon, H.-S., Lee, J.-Y., Kim, H.-S., Kim, M.-S., Kim, E.-S., et al., “A Comparison of Energy Consumption in Bulk Forming, Subtractive, and Additive Processes: Review and Case Study,” International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 1, No. 3, pp. 261–279, 2014.

    Article  Google Scholar 

  14. Ferrer, A. J., Halajko, A., and Amatucci, G. G., “Micro-Patterning of Metallic Film Structures through Direct-Write Dewetting,” Advanced Engineering Materials, Vol. 16, No. 9, pp. 1167–1178, 2014.

    Article  Google Scholar 

  15. Singer, J. P., Gotrik, K. W., Lee, J.-H., Kooi, S. E., Ross, C. A., and Thomas, E. L., “Alignment and Reordering of a Block Copolymer by Solvent-Enhanced Thermal Laser Direct Write,” Polymer, Vol. 55, No. 7, pp. 1875–1882, 2014.

    Article  Google Scholar 

  16. Liu, Z., Pan, C., Lin, L., Huang, J., and Ou, Z., “Direct-Write PVDF Nonwoven Fiber Fabric Energy Harvesters via the Hollow Cylindrical Near-Field Electrospinning Process,” Smart Materials and Structures, Vol. 23, No. 2, Paper No. 025003, 2013.

    Google Scholar 

  17. Melchels, F. P., Feijen, J., and Grijpma, D. W., “A Review on Stereolithography and Its Applications in Biomedical Engineering,” Biomaterials, Vol. 31, No. 24, pp. 6121–6130, 2010.

    Article  Google Scholar 

  18. Pham, D., Dimov, S., and Gault, R., “Part Orientation in Stereolithography,” The International Journal of Advanced Manufacturing Technology, Vol. 15, No. 9, pp. 674–682, 1999.

    Article  Google Scholar 

  19. Zhou, C., Chen, Y., Yang, Z., and Khoshnevis, B., “Digital Material Fabrication Using Mask-Image-Projection-Based Stereolithography,” Rapid Prototy** Journal, Vol. 19, No. 3, pp. 153–165, 2013.

    Article  Google Scholar 

  20. Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., et al., “Continuous Liquid Interface Production of 3D Objects,” Science, Vol. 347, No. 6228, pp. 1349–1352, 2015.

    Article  Google Scholar 

  21. Laplace, P. S., “Theory of Capillary Attraction,” Supplements to the 10th book of Celestial Mechanics, 1807.

    Google Scholar 

  22. Slobozhanin, L. A. and Perales, J. M., “Stability of Liquid Bridges between Equal Disks in an Axial Gravity Field,” Physics of Fluids A: Fluid Dynamics, Vol. 5, No. 6, pp. 1305–1314, 1993.

    Article  MATH  Google Scholar 

  23. Luo, C., Heng, X., and **ang, M., “Behavior of a Liquid Drop between Two Nonparallel Plates,” Langmuir, Vol. 30, No. 28, pp. 8373–8380, 2014.

    Article  Google Scholar 

  24. Plateau, J. A. F., “I. Experimental and Theoretical Researches on the Figures of Equilibrium of a Liquid Mass Withdrawn from the Action of Gravity.-Third Series,” The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, Vol. 14, No. 90, pp. 1–22, 1857.

    Article  Google Scholar 

  25. Gillette, R. D. and Dyson, D. C., “Stability of Fluid Interfaces of Revolution between Equal Solid Circular Plates,” The Chemical Engineering Journal, Vol. 2, No. 1, pp. 44–54, 1971.

    Article  Google Scholar 

  26. Sanz, A. and Martinez, I., “Minimum Volume for a Liquid Bridge between Equal Disks,” Journal of Colloid and Interface Science, Vol. 93, No. 1, pp. 235–240, 1983.

    Article  Google Scholar 

  27. Lu, Y., Lee, J., Kashyap, S., Emon, M. O. F., and Choi, J.-W., “Development and Characterizations of Liquid Bridge Based Microstereolithography (LBMSL) System,” Proc. of 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing, Paper No. MSEC2017-2731, 2017.

    Google Scholar 

  28. Lu, Y., “A Study on Liquid Bridge Based Microstereolithography (LBMSL) System,” Ph.D. Thesis, University of Akron, 2016.

    Google Scholar 

  29. Lee, J., Lu, Y., Kashyap, S., Alarmdari, A., Emon, M. O. F., and Choi, J.-W., “Liquid Bridge Microstereolithography,” Additive Manufacturing, Vol. 21, pp. 76–83, 2018.

    Article  Google Scholar 

  30. Ligon, S. C., Husár, B., Wutzel, H., Holman, R., and Liska, R., “Strategies to Reduce Oxygen Inhibition in Photoinduced Polymerization,” Chemical Reviews, Vol. 114, No. 1, pp. 557–589, 2013.

    Article  Google Scholar 

  31. Gauthier, M. A., Stangel, I., Ellis, T. H., and Zhu, X. X., “Oxygen Inhibition in Dental Resins,” Journal of Dental Research, Vol. 84, No. 8, pp. 725–729, 2005.

    Article  Google Scholar 

  32. Sangermano, M., Bongiovanni, R., Priola, A., and Pospiech, D., “Fluorinated Alcohols as Surface-Active Agents in Cationic Photopolymerization of Epoxy Monomers,” Journal of Polymer Science Part A: Polymer Chemistry, Vol. 43, No. 18, pp. 4144–4150, 2005.

    Article  Google Scholar 

  33. Esmaeilpour, M., Niroumand, B., Monshi, A., Ramezanzadeh, B., and Salahi, E., “The Role of Surface Energy Reducing Agent in the Formation of Self-Induced Nanoscale Surface Features and Wetting Behavior of Polyurethane Coatings,” Progress in Organic Coatings, Vol. 90, pp. 317–323, 2016.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, Pusan National University, 2, Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan, 46241, Republic of Korea

    Kwang-Ho Jo & Seok-Hee Lee

  2. Department of Mechanical Engineering, The University of Akron, 244 Sumner Street, Akron, Ohio, 44325, USA

    Jae-Won Choi

Authors
  1. Kwang-Ho Jo
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Seok-Hee Lee
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Jae-Won Choi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding authors

Correspondence to Seok-Hee Lee or Jae-Won Choi.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Jo, KH., Lee, SH. & Choi, JW. Liquid Bridge Stereolithography: A Proof of Concept. Int. J. Precis. Eng. Manuf. 19, 1253–1259 (2018). https://doi.org/10.1007/s12541-018-0148-2

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12541-018-0148-2

Keywords

Search

Navigation