Abstract
Understanding surface adsorption processes is of importance in a wide range of applications in life sciences. Herein we present a novel QCM-D device in which real time quartz sensing can be combined with real-time microscopy and microfluidic functionality for e. g. lab-on-a-chip applications. The experimental data on bacterial adhesion and blood coagulation obtained by the combined approach of QCM-D and microscopy illustrate its usefulness for life sciences.
Change history
03 September 2019
Auf Wunsch der Autoren werden folgende Personen zusätzlich als Autoren gelistet: <Emphasis Type="Bold">Zeqian Xu</Emphasis>, Universitätsklinikum Tübingen, Sektion Medizinische Werkstoffkunde & Technologie, Tübingen; <Emphasis Type="Bold">Stefanie Krajewski</Emphasis>, Universitätsklinik für Thorax-, Herz- und Gefäßchirurgie, Klinisches Forschungslabor, Tübingen und <Emphasis Type="Bold">Frank Rupp</Emphasis>, Universitätsklinikum Tübingen, Sektion Medizinische Werkstoffkunde & Technologie, Tübingen. Außerdem wurde die Danksagung von den Autoren umgeschrieben. Unten finden Sie den korrigierten Artikelkopf und die neue Danksagung.
Literatur
Xu Z, Coriand L, Löffler R et al. (2019) Saliva-coated titanium biosensor detects specific bacterial adhesion and bactericide caused mass loading upon cell death. Biosens Bioelectron 129:198–207
Hussain M, Wendel HP, Schmidt K et al. (2018), 2018 QCM-D surpassing clinical standard for the dose administration of new oral anticoagulant in the patient of coagulation disorders. Biosens Bioelectron 104:15–20
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Olsson, A.L.J., Braun, P., Zhang, J. et al. Mikrofluidischer Chip vereint QCM-D und mikroskopische Messungen. Biospektrum 25, 300–302 (2019). https://doi.org/10.1007/s12268-019-1051-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12268-019-1051-9