Abstract
The treatment of organ failure is one of the primary concerns of healthcare because available organ transplantation techniques have multiple disadvantages. Currently, tissue engineering has emerged as an ingenious approach in which biocompatible and biodegradable scaffolds are used as the alternative to allograft. The PLA/PBS solid electrospun scaffolds have gained a boosted interest in this field. However deficient nutrient diffusion in the implanted area, poor permeability of the seeded cells and insufficient vascularization has been postponing clinical translation of the electrospun scaffolds. In the present research, we have fabricated CNF/PLA/PBS hollow fibrous scaffolds using two different core templates such as mineral oil and glycerol. The physical properties and function were analyzed by using tensile test, scanning electron microscope, contact angle and invitro degradation. The quantity of attached protein was analyzed by using UV absorption and cell proliferation in the scaffold was determined by using MTT reagent kit. On the hollow fiber scaffold the size and distribution of pores affected the wettability. The oil template hollow fiber scaffold showed better cell integration and elevated cell multiplication rate than the glycerol patterned hollow fiber scaffold. Finally, the developed CNF reinforced PLA/PBS hollow fiber scaffold can be useful in tissue regeneration, repair, healing and can also function as wound dressing.
Similar content being viewed by others
Change history
27 March 2023
An Erratum to this paper has been published: https://doi.org/10.1007/s12221-023-00142-7
References
B. V. Slaughter, S. S. Khurshid, O. Z. Fisher, A. Khademhosseini, and N. A. Peppa, Adv. Mater., 21, 3307 (2009).
T. Abudula, K. Gauthaman, A. H. Hammad, K. J. Navare, A. A. Alshahrie, and S. A. Bencherif, J. Polym., 12, 1233 (2020).
S. Suvarnapathaki, X. Wu, D. Lantigua, M. A. Nguyen, and G. C. Unal, NPG Asia. Mater., 11, 65 (2019).
A. Hasan, A. Memic, N. Annabi, M. Hossain, A. Paul, and M. R. Dokmeci, Acta Biom., 11, 10 (2014).
S. Barua, P. Chattopadhyay, L. Aidew, A. K. Buragohain, and N. Karak, Polym. Inter., 64, 303 (2015).
S. M. Willerth and S. E. S. Elbert, Stem J., 1, 25 (2019).
Y. **ao, S. Ahadian, and M. Radisic, Tiss. Eng. Part B. Rev., 23, 9 (2017).
T. Abudula, U. Saeed, N. Salah, A. Memic, and H. Al-Turaif, J. Nanosci. Nanotech., 18, 240 (2018).
J. Hu, B. Kumar, and J. Lu, “Handbook of Fibrous Materials”, 1st ed., pp.1–36, Wiley-VCH, 2020.
M. Kuddus, “Bioplastics for Sustainable Development”, 1st ed., pp.103–136, Springer Nature, 2020.
V. Murali, T. Fujiwara, C. Gallop, Y. Wang, J. Wilson, M. Atwill, M. Kurakula, and J. Bumgardner, Int. J. Pharmaceutics, 584, 119438 (2020).
C. Wells, E. Coleman, R. Yeasmin, Z. Harrison, M. Kurakula, D. Baker, J. Bumgardner, T. Fujiwara, and J. Jennings, Marine Drugs, 19, 10 (2021).
M. Sarker, X. Chen, and D. Schreyer, J. Biom. Sci. Polym., 26, 683 (2015).
P. Becquart, A. Cambon-Binder, L. E. Monfoulet, M. Bourguignon, K. Vandamme, and M. Bensidhoum, Tiss. Eng. Part A, 18, 2084 (2012).
F. Lavan and T. Hunt, Clin. Plas. Surg., 17, 463 (1990).
S. Tuin, B. Pourdeyhimi, and E. Loboa, J. Biom. Res. Part A, 102, 3311 (2014).
T. Abudula, U. Saeed, H. Al-Turaif, and A. Alshahrie, US Patent, 11103617 (2021).
M. Phillip and J. Lw, J. Bio. Res., 5, 212 (2016).
R. Halaui, E. Zussman, R. Khalfin, R. Semiat, and Y. Cohen, J. Poly Adv. Tech., 28, 570 (2017).
K. L. Ou, C. S. Chen, L. H. Lin, J. C. Lu, Y. C. Shu, and W. C. Tseng, Euro. Poly. J., 47, 882 (2011).
J. Yoon, H. S. Yang, B. S. Lee, and W. R. Yu, Adv. Mater., 30, 1704 (2018).
A. Khalf, K. Singarapu, and S. V. Madihally, J. Cellulose, 22, 1389 (2015).
M. Lallave, J. Bedia, R. R. Rosas, J. Mirasol, T. Cordero, and J. C. Otero, Adv. Mater., 19, 4292 (2007).
G. H. Lee, J. C. Song, and K. B. Yoon, J. Macromol. Res., 18, 571 (2010).
T. Abudula, U. Saeed, A. Memic, K. Gauthaman, M. A. Hussain, and H. AlTuraif, J. Polym. Res., 26, 110 (2019).
T. Nguyen, C. Ghosh, S. G. Hwang, N. Chanunpanich, and J. S. Park, Int. J. Pharm., 439, 296 (2012).
D. H. Reneker and A. L. Yarin, J. Polym., 49, 2387 (2008).
J. E. Díaz, A. Barrero, M. Márquez, and I. G. Loscertales, Adv. Funct. Mater, 16, 2110 (2006).
A. Moghe and B. Gupta, Polym. Rev., 48, 353 (2008).
F. Khodkar and N. G. Ebrahimi, J. Appl. Polym. Sci., 134, 44979 (2017).
Y. Lu, J. Huang, G. Yu, R. Cardenas, S. Wei, and E. K. Wujcik, Wiley Interdis. Rev.: Nanomed. Nanobiotech., 8, 654 (2016).
X. Ji, P. Wang, Z. Su, G. Ma, and S. Zhang, J. Mater. Chem. B, 2, 181 (2014).
M. Krouit, J. Bras, and M. N. Belgacem, J. Europ. Polym., 44, 4074 (2008).
L. Francis, N. Ghaffour, A. S. Alsaadi, S. P. Nunes, and G. L. Amy, J. Mater. Sci., 49, 2045 (2014).
Y. Arima and H. Iwata, J. Biomater., 28, 3074 (2007).
J. Wei, T. Igarashi, N. Okumori, T. Igarashi, T. Maetani, and B. Liu, J. Biomat., 4, 452 (2009).
J. Zanjani, B. Okan, Y. Menceloglu, and M. Yildiz, J. Rein. Plast. Compos., 34, 16 (2015).
Y. You, B. Min, J. Lee, S. Lee, and W. Park, J. Appl. Poly Sci., 95, 2 (2005).
S. Sutthiphong, P. Pavasant, and P. Supaphol, J. Polym., 50, 1548 (2009).
I. Garcia-Orue, G. Gainza, S. Villullas, J. L. Pedraz, R. M. Hernandez, and M. Igartua, Nanobiom. Soft Tiss. Eng., 5, 31 (2016).
M. Tallawi, R. Rai, M. Gleixner, O. Roerick, M. Weyand, and J. Roether, Macromol. Symp., 334, 57 (2013).
Acknowledgement
The authors would like to acknowledge the King Abdul Aziz University, Jeddah, KSA for project funding and technical support.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare no conflicts of interest with respect to research and publication of this article.
Rights and permissions
About this article
Cite this article
Saeed, U., Abdullah, T. & Al-Turaif, H. Surface Morphology and Biochemical Characteristics of Electrospun Cellulose Nanofibril Reinforced PLA/PBS Hollow Scaffold for Tissue Engineering. Fibers Polym 23, 2539–2548 (2022). https://doi.org/10.1007/s12221-022-4229-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-022-4229-6