Abstract
Polyaniline, a conducting polymer, is prepared by the oxidation of aniline with various oxidants. When using ammonium peroxydisulfate or hydrogen peroxide at high concentrations, the temperature may exceed boiling point of reaction mixture, which then explodes. This represents a safety hazard in the synthesis of polyaniline. Also polyaniline samples prepared in the solutions of nitric acid may spontaneously ignite or decompose during the characterization. The synthesis using the recommended protocol is safe.
Similar content being viewed by others
References
Ahmed SM (2002) Preparation and degradation of highly conducting polyaniline doped with picric acid. Eur Polym J 38:1151–1158. doi:10.1016/S0014-3057(01)00293-2
Ayad MM, El-Hefnawy G, Zaghlol S (2013) Facile synthesis of polyaniline nanoparticles; its adsorption behavior. Chem Eng J 217:460–465. doi:10.1016/j.cej.2012.11.099
Bláha M, Riesová M, Zedník J, Anzlovar A, Zigon M, Vohlídal J (2011) Polyaniline synthesis with iron(III) chloride-hydrogen peroxide catalyst system: reaction course and polymer structure study. Synth Met 161:1217–1225. doi:10.1016/j.synthmet.2011.04.008
Blinova NV, Bober P, Hromádková J, Trchová M, Stejskal J, Prokeš J (2010) Polyaniline–silver composites prepared by the oxidation of aniline with silver nitrate in acetic acid solutions. Polym Int 59:437–446. doi:10.1002/pi.2718
Bober P, Stejskal J, Trchová M, Prokeš J (2011) Polyaniline–silver composites prepared by the oxidation of aniline with mixed oxidants, silver nitrate and ammonium peroxydisulfate: the control of silver content. Polymer 52:5947–5952. doi:10.1016/j.polymer.2011.10.025
Brožová L, Holler P, Kovářová J, Stejskal J, Trchová M (2008) The stability of polyaniline in strongly alkaline or acidic aqueous media. Polym Degrad Stab 93:592–600. doi:10.1016/j.polymdegradstab.2008.01.012
Desphande PP, Vathare SS, Vagge ST, Tomšík E, Stejskal J (2013) Conducting polyaniline/multi-wall carbon nanotubes composite paints on low carbon steel for corrosion protection: electrochemical investigations. Chem Pap 67:1072–1078. doi:10.2478/s11696-012-0273-9
Ghosh P, Kar SB (2002) Comparative studies on synthesis and characterization of polyaniline prepared with or without poly (vinyl alcohol) support in aqueous media in the presence of different acids used as dopants. J Polym Mater 19:75–85 (WOS: 000184561300010)
Janaki V, Vijayaraghavan K, Ramasamy AK, Lee KJ, Oh BT, Kamala-Kannan S (2012) Competitive adsorption of reactive orange 16 and reactive brilliant blue R on polyaniline/bacterial extracellular polysaccharides composite—a novel eco-friendly polymer. J Hazard Mater 241:110–117. doi:10.1016/j.jhazmat.2012.09.019
Krishnani KK, Srinives S, Mohapatra BC, Boddu VM, Hao JM, Meng X, Mulchandani A (2013) Hexavalent chromium removal mechanism using conducting polymers. J Hazard Mater 252:99–106. doi:10.1016/j.jhazmat.2013.01.079
Kucekova Z, Kasparkova V, Humpolicek P, Sevcikova P, Stejskal J (2013) Antibacterial properties of polyaniline–silver films. Chem Pap 67:1103–1108. doi:10.2478/s11696-013-0385-x
Prokeš J, Stejskal J (2004) Polyaniline prepared in the presence of various acids 2. Thermal stability of conductivity. Polym Degrad Stab 86:187–195. doi:10.1016/j.polymdegradstab.2004.04.012
Sapurina I, Tenkovtsev AV, Stejskal J (2015) Conjugated polyaniline as a result of the benzidine rearrangement. Polym Int 64:453–465. doi:10.1002/pi.4869
Shi L, Hou AG, Chen LY, Wang ZF (2015) Electrochemical sensor prepared from molecularly imprinted polymer for recognition of TNT. Polym Compos 36:1280–1285. doi:10.1002/pc.23032
Stejskal J (2013) Conducting polymer–silver composites. Chem Pap 67:814–848. doi:10.2478/s11696-012-0304-6
Stejskal J, Gilbert RG (2002) Polyaniline. Preparation of a conducting polymer (IUPAC technical report). Pure Appl Chem 74:857–867. doi:10.1351/pac200274050857
Stejskal J, Trchová M (2012) Aniline oligomers versus polyaniline. Polym Int 61:240–251. doi:10.1002/pi.3179
Stejskal J, Kratochvíl P, Špírková M (1995) Accelerating effect of some cation radicals on the polymerization of aniline. Polymer 36:4135–4140. doi:10.1016/0032-3861(95)90996-F
Stejskal J, Sapurina I, Trchová M, Křivka I, Tobolková E (1998) Solid-state protonation and electrical conductivity of polyaniline. Macromolecules 31:2218–2222. doi:10.1021/ma970823h
Stejskal J, Sapurina I, Trchová M, Prokeš J (2011) Protonation of polyaniline with 3-nitro-1,2,4-triazol-5-one. Chem Mater 14:3602–3606. doi:10.1021/cm021164c
Stejskal J, Exnerová M, Morávková Z, Trchová M, Hromádková J, Prokeš J (2012) Oxidative stability of polyaniline. Polym Degrad Stab 97:1026–1033. doi:10.1016/j.polymdegradstab.2012.03.006
Stejskal J, Prokeš J, Trchová M (2014) Reprotonated polyanilines: the stability of conductivity at elevated temperature. Polym Degrad Stab 102:67–73. doi:10.1016/j.polymdegradstab.2014.02.001
Stejskal J, Sapurina I, Trchová M (2015a) Polyaniline nanostructures and the role of aniline oligomers in their formation. Prog Polym Sci 35:1420–1481. doi:10.1016/j.progpolymsci.2010.07.006
Stejskal J, Trchová M, Bober P, Humpolíček P, Kašpárková V, Sapurina I, Shishov MA, Varga M (2015b) Conducting polymers: polyaniline. Encyclopedia of polymer science and technology, Wiley Online Library. Wiley, Oxford. doi:10.1002/0471440264.pst640
Trchová M, Morávková Z, Šeděnková I, Stejskal J (2012) Spectroscopy of thin polyaniline films deposited during chemical oxidation of aniline. Chem Pap 66:415–445. doi:10.2478/s11696-012-0142-6
Trchová M, Morávková Z, Bláha M, Stejskal J (2014) Raman spectroscopy of polyaniline and oligoaniline thin films. Electrochim Acta 122:28–38. doi:10.1016/j.electacta.2013.10.133
Wang ZD, Feng YT, Hao XG, Huang W, Guan GQ, Abudula A (2014) An intelligent displacement pum** film system: a new concept for enhancing heavy metal ion removal efficiency from liquid waste. J Hazard Mater 274:436–442. doi:10.1016/j.jhazmat.2014.04.035
Zhang HR, Wang JX, Zhang CL, Wang Z, Wang SC (2011) Dangerous, an explosion of polyaniline nanomaterials. Synth Met 161:544–547. doi:10.1016/j.synthmet.2010.12.032
Zhang Q, Du X, Ma XL, Hao HG, Guan GQ, Wang ZD, Xue CF, Zhang ZL, Zuo ZJ (2015) Facile preparation of electroactive amorphous α-ZrP/PANI hybrid film for potential-triggered adsorption of Pb2+ ions. J Hazard Mater 289:91–100. doi:10.1016/j.jhazmat.2014.04.035
Acknowledgements
The authors thank the Czech Science Foundation (13-00270S) for financial support.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Stejskal, J., Bober, P., Trchová, M. et al. Explosive hazards in polyaniline chemistry. Chem. Pap. 71, 387–392 (2017). https://doi.org/10.1007/s11696-016-0092-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11696-016-0092-5