Abstract
The structure of “Si-liquid film-Si” was constructed by simulating the semi-solid structure of high-silicon Al alloys, and the effects of temperature and thickness on the stress–strain characteristics of Al–Si eutectic liquid film were studied to reveal the hot cracking process of high-silicon Al alloys.
References
J. Hou, R. Li, C. Xu, T. Li, and Z. Shi: J. Manuf. Process., 2021, vol. 68, pp. 657–67.
W. Zhou, R. Wang, C. Peng, and Z. Cai: J. Mater. Sci. Mater. Electron., 2022, vol. 33, pp. 7811–23.
L. **, S. Guo, K. Ding, K.G. Prashanth, B. Sarac, and J. Eckert: Vacuum, 2021, vol. 191, 110405.
T. Gietzelt, L. Eichhorn, T. Wunsch, U. Gerhards, T. Przeorski, H. Weiss, and R. Dittmeyer: Adv. Eng. Mater., 2014, vol. 16, pp. 1052–65.
F. D’Elia, C. Ravindran, and D. Sediako: Mater. Sci. Eng., 2015, vol. 624, pp. 169–80.
D.G. Eskin, Suyitno, L. Katgerman: Prog. Mater. Sci., 2004, vol. 49, pp. 629–711.
S. Li and D. Apelian: Int. J. Metalcast., 2015, vol. 5, pp. 23–40.
S. Lin, C. Aliravci, and M.O. Pekguleryuz: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1056–68.
F. Sheykh-jaberi, S.L. Cockcroft, D.M. Maijer, and A.B. Phillion: J. Mater. Process. Technol., 2019, vol. 266, pp. 37–45.
T. Subroto, D.G. Eskin, A. Miroux, K. Ellingsen, M. M’hamdi, and L. Katgerman: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 871–88.
A.B. Phillion, R.W. Hamilton, D. Fuloria, A.C.L. Leung, P. Rockett, T. Connolley, and P.D. Lee: Acta Mater., 2011, vol. 59, pp. 1436–44.
S. Terzi, L. Salvo, M. Suéry, N. Limodin, J. Adrien, E. Maire, Y. Pannier, M. Bornert, D. Bernard, M. Felberbaum, M. Rappaze, and E. Boller: Scr. Mater., 2009, vol. 61, pp. 449–52.
A. Fallet, G. Chichignoud, C.L. Martin, M. Suéry, and Ph. Jarry: Mater. Sci. Eng. A, 2006, vol. 426, pp. 187–93.
I. Farup, J.M. Drezet, and M. Rappaz: Acta Mater., 2001, vol. 49, pp. 1261–69.
J. Zhuang and Y.S. Ju: Langmuir, 2015, vol. 31, pp. 10173–82.
M.G. Bozkurt, D. Fratta, and W.J. Likos: Can. Geotech. J., 2017, vol. 54, pp. 1300–309.
Y. Chen, Y. Zhao, H. Gao, and J. Zheng: Particuology, 2011, vol. 9, pp. 374–80.
H. Kobatake, J. Brillo, J. Schmitz, and P.-Y. Pichon: J. Mater. Sci., 2015, vol. 50, pp. 3351–60.
S. Cai and B. Bhushan: Philos. Trans. R. Soc. A, 2008, vol. 366, pp. 1627–47.
X. Song, X. Bian, J. Zhang, and J. Zhang: J. Alloys Compd., 2009, vol. 479, pp. 670–73.
D. Deganello, A.J. Williams, T.N. Croft, A.S. Lubansky, D.T. Gethin, and T.C. Claypole: Comput. Fluids, 2011, vol. 40, pp. 42–51.
Acknowledgement
This work was supported by the National Natural Science Foundation of China. [Grant No. 52071123].
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
On behalf of all authors, the corresponding author states that there is no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Zhang, K., Fang, X., Ma, Z. et al. Stress–Strain Characteristics of Intergranular Liquid Film in High-Silicon Aluminum Alloys. Metall Mater Trans A 55, 2596–2601 (2024). https://doi.org/10.1007/s11661-024-07443-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-024-07443-3