Abstract
The cracking of nickel-based single-crystal alloys is associated with the residual stress. In this paper, we employed focused ion beam and digital image correlation (FIB-DIC) technology to characterize the crack-tip residual stress at ultrahigh spatial resolution. The repeatability and accuracy of FIB-DIC were validated by experiments and simulations. A direct correlation between residual stress and hardness was established, which provides a new way to prevent cracking through the visualization and control of residual stress.
Data availability
The data that support the findings of this study are available from the corresponding author upon reasonable request.
Change history
09 September 2023
The corresponding authors’ contact emails have been added.
References
T.M. Pollock: Nat. Mater., 2016, vol. 15, pp. 809–15.
X. An, Y. Mu, J. Liang, J. Li, Y. Zhou, and X. Sun: J. Mater. Sci. Technol., 2022, vol. 127, pp. 177–82.
H. Niu, F. Zheng, H. Wang, C. Liu, R. Li, X. Li, H. Wu, Q. Liu, and G. Fan: Metall. Mater. Trans. A, 2023, vol. 54, pp. 777–82.
X. Liang, Y.T. Zhao, D. Ma, Z. Jia, and X. Meng: Mater. Manuf. Process., 2017, vol. 32, pp. 1887–92.
J. Li, X. An, J. Liang, Y. Zhou, and X. Sun: J. Mater. Sci. Technol., 2022, vol. 117, pp. 79–98.
J.C. Han and H.C. Chen: J. Propul. Power, 2006, vol. 22, pp. 226–48.
L.M. Wright, J.C. Han, and J. Enhanc: Heat Transf., 2014, vol. 21, pp. 111–40.
W. Tang, T. Zhao, R. Dou, and L. Wang: Ceram. Int., 2022, vol. 48, pp. 15218–26.
J. Fan, X. Xu, S. Niu, Y. Zhou, X. Li, Y. Guo, and Y. Luo: J. Eur. Ceram. Soc., 2022, vol. 42, pp. 4388–95.
J.E. Kanyo, S. Schafföner, R.S. Uwanyuze, and K.S. Leary: J. Eur. Ceram. Soc., 2020, vol. 40, pp. 4955–73.
R. Yi, C. Chen, C. Shi, Y. Li, H. Li, and Y. Ma: Ceram. Int., 2021, vol. 47, pp. 20807–20.
X.Y. Tian, J.C. Feng, J.M. Shi, H.W. Li, and L.X. Zhang: Ceram. Int., 2015, vol. 41, pp. 145–53.
J.W. Park, P.F. Mendez, and T.W. Eagar: Acta Mater., 2002, vol. 50, pp. 883–99.
A. Morançais, M. Fèvre, M. François, N. Guel, S. Kruch, P. Kanouté, and A. Longuet: J. Appl. Crystallogr., 2015, vol. 48, pp. 1761–76.
Y. Geng, X. Dong, K. Wang, X. Mei, Z. Tang, and W. Duan: Opt. Laser Technol., 2020, vol. 123, p. 105917.
M. Liu, Q. Zheng, X. Wang, and C. Xu: Mech. Mater., 2022, vol. 164, p. 104143.
R.M.N. Fleury, E. Salvati, D. Nowell, A.M. Korsunsky, F. Silva, and Y.H. Tai: Int. J Fatigue, 2019, vol. 119, pp. 34–42.
E. Salvati, A.J.G. Lunt, C.P. Heason, G.J. Baxter, and A.M. Korsunsky: Mater. Des., 2020, vol. 191, p. 108605.
J. Chen, E. Salvati, F. Uzun, C. Papadaki, Z. Wang, J. Everaerts, A.M. Korsunsky, and J. Manuf: Process., 2020, vol. 53, pp. 190–200.
E. Salvati, A.J.G. Lunt, S. Ying, T. Sui, H.J. Zhang, C. Heason, G. Baxter, and A.M. Korsunsky: Comput. Methods Appl. Mech. Engrg., 2017, vol. 320, pp. 335–51.
J. Everaerts, E. Salvati, F. Uzun, L. Romano Brandt, H. Zhang, and A.M. Korsunsky: Acta Mater., 2018, vol. 156, pp. 43–51.
J. Everaerts, H. Li, W. Li, and A.M. Korsunsky: Scr. Mater., 2023, vol. 235, p. 115634.
D. Fukui, N. Nakada, and S. Onaka: Acta Mater., 2020, vol. 196, pp. 660–68.
A.J.G. Lunt, N. Baimpas, E. Salvati, I.P. Dolbnya, T. Sui, S. Ying, H. Zhang, A.K. Kleppe, J. Dluhoš, and A.M. Korsunsky: J. Strain. Anal. Eng. Des., 2015, vol. 50, pp. 426–44.
A.J.G. Lunt and A.M. Korsunsky: Surf. Coat. Technol., 2015, vol. 283, pp. 373–88.
E. Salvati, L. Romano-Brandt, M.Z. Mughal, M. Sebastiani, and A.M. Korsunsky: J. Mech. Phys. Solids, 2019, vol. 125, pp. 488–501.
E. Salvati, T. Sui, and A.M. Korsunsky: Int. J. Solids Struct., 2016, vol. 87, pp. 61–69.
E. Salvati, S. O’Connor, T. Sui, D. Nowell, and A.M. Korsunsky: Eng. Fract. Mech., 2016, vol. 167, pp. 210–23.
E. Salvati, T. Sui, A.J.G. Lunt, and A.M. Korsunsky: Mater. Des., 2016, vol. 92, pp. 649–58.
A.M. Korsunsky, M. Sebastiani, and E. Bemporad: Surf. Coat. Technol., 2010, vol. 205, pp. 2393–403.
A.J.G. Lunt, E. Salvati, L. Ma, I.P. Dolbyna, T.K. Neo, and A.M. Korsunsky: J. Mech. Phys. Solids, 2016, vol. 94, pp. 47–67.
Y. Su and Q. Zhang: Opt. Lasers Eng., 2022, vol. 148, p. 106766.
B. Zhu, Y. Wang, J. Dluhoš, A.J. London, M. Gorley, M.J. Whiting, and T. Sui: Sci. Adv., 2022, vol. 8, p. eabl4592.
S. Haratian, F. Niessen, F.B. Grumsen, M.J.B. Nancarrow, E.V. Pereloma, M. Villa, T.L. Christiansen, and M.A.J. Somers: Acta Mater., 2020, vol. 200, pp. 674–85.
A.M. Korsunsky, E. Salvati, A.G.J. Lunt, T. Sui, M.Z. Mughal, R. Daniel, J. Keckes, E. Bemporad, and M. Sebastiani: Mater. Des., 2018, vol. 145, pp. 55–64.
Y.C. Lin and C.Y. Wang: J. Alloys Compd., 2020, vol. 838, p. 155141.
T.Y. Tsui, W.C. Oliver, and G.M. Pharr: J. Mater. Res., 1996, vol. 11, pp. 752–59.
S. Suresh and A.E. Giannakopoulos: Acta Mater., 1998, vol. 46, pp. 5755–67.
S. Gao, S. Geng, P. Jiang, C. Han, and L. Ren: Opt. Laser Technol., 2022, vol. 146, p. 107580.
Acknowledgments
This work was financially supported by the National Key Research & Development Plan (Grant No. 2020YFA0405900), the National Natural Science Foundation of China (Grant Nos. 52171117, 92263201, 51927801), and State Key Lab of Advanced Metals and Materials (Grant No. 2022-Z19).