Abstract
Joints greatly affect the mechanical behavior and crack evolution of jointed rock masses. In this paper, numerical specimens containing pre-existing random joints are constructed based on a combination of the flat-joint and smooth-joint models in the particle flow code in two dimensions (PFC2D). Then, uniaxial compression of these specimens is carried out to reveal the influence of joint length or number on the mechanical behavior, crack development, acoustic emission (AE) event attributes and failure characteristics. The results suggest that a univariant increase in random joint length or number leads to a nonlinear decrease in the uniaxial compressive strength (UCS) and a linear decrease in the elastic modulus, while the fracture behavior of the specimens shows a transformation from brittle to ductile in this process. With increasing joint length or number, the cracks and AE events generated in the joints significantly increase and exceed those generated in the intact rock. Tension cracks play a dominant role in the development of cracks within intact rock, while shear cracks dominate the crack evolution of random joints. More cracks appear in the jointed rock specimens at the elastic deformation stage as the joint length or number increases. The variation in the joint length or number strongly influences the mechanical behavior, crack evolution and failure pattern of the randomly jointed rock specimen.
Similar content being viewed by others
References
Bahrani N, Kaiser PK (2016) Numerical investigation of the influence of specimen size on the unconfined strength of defected rocks. Comput Geotech 77:56–67. https://doi.org/10.1016/j.compgeo.2016.04.004
Bahrani N, Kaiser PK (2017) Estimation of confined peak strength of crack-damaged rocks. Rock Mech Rock Eng 50(2):309–326. https://doi.org/10.1007/s00603-016-1110-1
Daphalapurkar NP, Ramesh KT, Graham-Brady L, Molinari JF (2011) Predicting variability in the dynamic failure strength of brittle materials considering pre-existing flaws. J Mech Phys Solids 59:297–319. https://doi.org/10.1016/j.jmps.2010.10.006
Farahmand K, Vazaios I, Diederichs MS, Vlachopoulos N (2018) Investigating the scale-dependency of the geometrical and mechanical properties of a moderately jointed rock using a synthetic rock mass (SRM) approach. Comput Geotech 95:162–179. https://doi.org/10.1016/j.compgeo.2017.10.002
Gao FQ, Kang HP (2016) Effects of pre-existing discontinuities on the residual strength of rock mass—insight from a discrete element method simulation. J Struct Geol 85:40–50. https://doi.org/10.1016/j.jsg.2016.02.010
Huang CC, Yang WD, Duan K, Fang LD, Wang L, Bo CJ (2019) Mechanical behaviors of the brittle rock-like specimens with multi-nonpersistent joints under uniaxial compression. Construct Build Mater 220:426–443. https://doi.org/10.1016/j.conbuildmat.2019.05.159
Itasca Consulting Group Inc (2016) PFC2D-particle flow code in 2 dimensions, version 5.0. Minneapolis, MN, USA
Jia LC, Chen M, Zhang W, Xu T, Zhou Y, Hou B, ** Y (2013) Experimental study and numerical modeling of brittle fracture of carbonate rock under uniaxial compression. Mech Res Commun 50:58–62. https://doi.org/10.1016/j.mechrescom.2013.04.002
Jiang SQ, Li X, Tan YQ, Liu HH, Xu ZQ, Chen R (2017) Discrete element simulation of SiC ceramic with pre-existing random flaws under uniaxial compression. Ceram Int 43:13717–13728. https://doi.org/10.1016/j.ceramint.2017.07.084
Lei QH, Latham JP, Tsang CF (2017) The use of discrete fracture networks for modelling coupled geomechanical and hydrological behavior of fractured rocks. Comput Geotech 85:151–176. https://doi.org/10.1016/j.compgeo.2016.12.024
Liu RC, Jiang YJ, Li B, Wang XS (2015) A fractal model for characterizing fluid flow in fractured rock masses based on randomly distributed rock fracture networks. Comput Geotech 65:45–55. https://doi.org/10.1016/j.compgeo.2014.11.004
Ma WQ, Wang TX (2020) Numerical study of the influence of joint angle on the failure behavior of randomly and nonpersistently jointed rock mass. Arab J Sci Eng 45(5):4023–4036. https://doi.org/10.1007/s13369-020-04361-5
Ma C, Yao WM, Yao Y, Li J (2018) Simulating strength parameters and size effect of stochastic jointed rock mass using DEM method. KSCE J Civ Eng 22(12):4872–4881. https://doi.org/10.1007/s12205-017-1581-y
Peng J, Wong LNY, Teh CL (2018) A re-examination of slenderness ratio effect on rock strength: Insights from DEM grain-based modelling. Eng Geol 246:245–254. https://doi.org/10.1016/j.enggeo.2018.10.003
Potyondy D (2012) Flat-joint contact model (PFC3D), version 1.0. Itasca Consulting Group, Inc., Minneapolis, MN
Potyondy D (2013) Flat-joint contact model (PFC3D), version 1.0. Itasca Consulting Group, Inc., Minneapolis, MN.
Saadat M, Tah A (2019) A numerical approach to investigate the effects of rock texture on the damage and crack propagation of a pre-cracked granite. Comput Geotech 111:89–111. https://doi.org/10.1016/j.compgeo.2019.03.009
Stavrou A, Murphy W (2018) Quantifying the effects of scale and heterogeneity on the confined strength of micro-defected rocks. Int J Rock Mech Min 102:131–143. https://doi.org/10.1016/j.ijrmms.2018.01.019
Vazaios I, Farahmand K, Vlachopoulos N, Diederichs MS (2018) Effects of confinement on rock mass modulus: a synthetic rock mass modelling (SRM) study. J Rock Mech Geotech 10(3):436–456. https://doi.org/10.1016/j.jrmge.2018.01.002
Wang PT, Yang TH, Xu T, Cai MF, Li CH (2016) Numerical analysis on scale effect of elasticity, strength and failure patterns of jointed rock masses. Geosci J 20:539–549. https://doi.org/10.1007/s12303-015-0070-x
Wang PT, Yang TH, Yu QL, Liu HL, Zhang PH (2013) Characterization on jointed rock masses based on PFC2D. Front Struct Civ Eng 7(1):32–38. https://doi.org/10.1007/s11709-013-0187-9
Wang X, Cai M (2019) A DFN–DEM multi-scale modeling approach for simulating tunnel excavation response in jointed rock masses. Rock Mech Rock Eng 53(3):1053–1077. https://doi.org/10.1007/s00603-019-01957-8
Wu N, Liang ZZ, Li YC, Li H, Li WR, Zhang ML (2019a) Stress-dependent anisotropy index of strength and deformability of jointed rock mass: insights from a numerical study. Bull Eng Geo Enviro 78:5905–5917. https://doi.org/10.1007/s10064-019-01483-5
Wu SC, Chen L, Cheng ZQ (2019b) Macro and meso research on the zonal disintegration phenomenon and the mechanism of deep brittle rock mass. Eng Fract Mech 211:254–268. https://doi.org/10.1016/j.engfracmech.2019.02.023
Zhang XL, Jiao YY, Zhao J (2008) Simulation of failure process of jointed rock. J Cent South Univ T 15(6):888–894. https://doi.org/10.1007/s11771-008-0162-0
Zou YS, Zhang SC, Ma XF, Zhou T, Zeng B (2016) Numerical investigation of hydraulic fracture network propagation in naturally fractured shale formations. J Struct Geol 84:1–13. https://doi.org/10.1016/j.jsg.2016.01.004
Acknowledgements
This research is financially supported by the Key Scientific Research Projects of Higher Education Institutions in Henan Province (Grant No. 20A560019), the Science and Technology Project of Henan Province (Grant No. 202102310569), the Nanhu Young Scholars Program of **nyang Normal University, the Natural Science Foundation of Henan Province (Grant No. 212300410231) and the Itasca Consulting Group through its Itasca Education Partnership (IEP) program. The authors gratefully acknowledge the financial or instructional support provided by them.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
On behalf of all authors, the corresponding author states that there is no conflict of interest.
Additional information
Communicated by Dr. Michael Nones (CO-EDITOR-IN-CHIEF).
Rights and permissions
About this article
Cite this article
Ma, W., Wang, J., Li, X. et al. Crack evolution and acoustic emission characteristics of rock specimens containing random joints under uniaxial compression. Acta Geophys. 69, 2427–2441 (2021). https://doi.org/10.1007/s11600-021-00686-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11600-021-00686-3