Abstract
In cement industry, the selection of catalyst temperature window and the inhibition effect of dust composition in flue gas on catalyst are the key issues of flue gas denitrification. In this article, a pilot study with Ce doped V-W/Ti catalyst on the removal of NOx by selective catalytic reduction with ammonia (NH3-SCR) from the cement kiln flue gas was presented. Cement kiln dust loading on catalysts obviously decreased the NO conversion in the absence of SO2 and H2O, while the denitration efficiency restored from 75 to 98% at 280 ℃ after SO2 and H2O introduced into the reaction system, which mainly because the SO2 may enhance the acidic site on the catalyst surface, and prefer to be bonded with the coordinated Ca species, releasing the active sites poisoned by dust. The NH3-temperature programmed desorption (NH3-TPD), X-ray photoelectron spectroscopy (XPS), and H2-temperature programmed reduction (H2-TPR) detections were performed to reveal that the appropriate Ce and W ratios catalyst contributed better denitrification activity. The optimum ratio of Ce doped catalyst was amplified to form the standard honeycomb monomer catalyst, and then, the activity of catalyst was verified on the side line of cement kiln. The effect of temperature and space velocity on denitrification efficiency was investigated, and the denitration efficiency reached to 92.5% at 300℃ and 3000 h−1 space velocity. Moreover, the life of catalyst was verified and predicted by GM (1,1) grey model. The study realized the innovation from the laboratory data rules to the industrial pilot application, providing positive promoting value for the industrial large-scale demonstration application of the catalyst.
Similar content being viewed by others
Data availability
All data and materials generated or analyzed during this study were included in this paper.
References
Amiri M, Salavati-Niasari M, Akbari A, Gholami T (2017) Removal of malachite green (a toxic dye) from water by cobalt ferrite silica magnetic nanocomposite: herbal and green sol-gel autocombustion synthesis. Int Hydrogen Energy 42:24846–24860. https://doi.org/10.1016/j.ijhydene.2017.08.077
Asghar U, Rafiq S, Anwar A, Iqbal T, Ahmed A, Jamil F, Khurram MS, Akbar MM, Farooq A, Shah NS, Park YK (2021) Review on the progress in emission control technologies for the abatement of CO2, SOx and NOx from fuel combustion. J Environ Chem Eng 9(1–14):106064–106078. https://doi.org/10.1016/j.jece.2021.106064
Boningari T, Ettireddy P, Somogyvari A, Liu Y, Vorontsov A, Mcdonald C, Smirniotis P (2015) Influence of elevated surface texture hydrated titania on Ce-doped Mn/TiO2 catalysts for the low-temperature SCR of NOx under oxygen-rich conditions. J Catal 325:145–155. https://doi.org/10.1016/j.jcat.2015.03.002
Cai J, Wu HX, Ren QQ, Lin L, Zhou T, Lyu QG (2020) Innovative NOx reduction from cement kiln and pilot-scale experimental verification. Fuel Process Technol 199:106306–106314. https://doi.org/10.1016/j.fuproc.2019.106306
Cai T, Zhao D, Wang B, Li JH, Guan YH (2020) No emission and thermal performances studies on premixed ammonia-oxygen combustion in a CO2-free micro-planar combustor. Fuel 280:118554–118563. https://doi.org/10.1016/j.fuel.2020.118554
Chen L, Li JH, Ge MF (2011) The poisoning effect of alkali metals do** over nano V2O5-WO3/TiO2 catalysts on selective catalytic reduction of NOx by NH3. Chem Eng J 170:531–537. https://doi.org/10.1016/j.cej.2010.11.020
Danisha M, Tayyab M, Akhtar A, Altaf AA, Kausar S, Ullah S, Iqbal M (2020) Effect of soft template variation on the synthesis, physical, and electrochemical properties of Mn3O4 nanomaterial. Inorg Nano-Met Chem 51(3):359–365. https://doi.org/10.1080/24701556.2020.1790000
Dong CQ, Ma S, Fu Y, Li WY, Lu Q, Yang YP (2016) Study on life prediction of SCR denitrification catalyst in thermal power plants. J North China Elec Power Univ 43(3):64–68. https://doi.org/10.3969/j.ISSN.1007-2691.2016.03.10
Fan ZY, Shi JW, Gao C, Gao G, Wang BR, Niu CM (2017) Rationally designed porous MnOx-FeOx nanoneedles for low temperature selective catalytic reduction of NOx by NH3. ACS Appl Mater Inter 9:16117–16127. https://doi.org/10.1021/acsami.7b00739
Gu YH, Cao HH, Liu W, Lin XH, Zheng T, Cheng W, Huang JW, Xu JC (2021) Impact of co-processing sewage sludge on cement kiln NOx emissions reduction. J Environ Chem Eng 9:105511–105518. https://doi.org/10.1016/j.jece.2021.105511
Guo RT, Li M, Sun P, Pan W, Liu S (2017) Mechanistic investigation of the promotion effect of Bi modification on the NH3-SCR performance of Ce/TiO2 catalyst. J Phys Chem C 121:27535–27545. https://doi.org/10.1021/acs.jpcc.7b10342
Guo YY, Luo L, Mu BL, Wang J, Zhu TY (2019) Ash- and alkali-poisoning mechanisms for commercial vanadium-titanic-based catalysts. Ind Eng Chem Res 58:22418–22426. https://doi.org/10.1021/acs.iecr.9b04454
Han LP, Cai SX, Gao M, Hasegawa JY, Wang PL, Zhang JP, Shi LY, Zhang DS (2019) Selective catalytic reduction of NOx with NH3 by using novel catalysts: state of the art and future prospects. Chem Rev 119:10916–10976. https://doi.org/10.1021/acs.chemrev.9b00202
He YY, Ford ME, Zhu MH, Liu QC, Tumuluri U, Wu ZL, Wachs IE (2016) Influence of catalyst synthesis method on selective catalytic reduction (SCR) of NO by NH3 with V2O5-WO3/TiO2 catalysts. Appl Catal B: Environ 193:141–150. https://doi.org/10.1016/j.apcatb.2016.04.022
Heydariyan Z, Monsef R, Salavati-Niasari M (2022) Insights into impacts of Co3O4-CeO2 nanocomposites on the electrochemical hydrogen storage performance of g-C3N4: Pechini preparation, structural design and comparative study. J Alloy Compd 924:166564–166578. https://doi.org/10.1016/j.jallcom.2022.166564
Hu YC, Jiang P (2017) Forecasting energy demand using neural-network-based grey residual modification models. J Oper Res Soc 68(5):1–10. https://doi.org/10.1057/s41274-016-0130-2
Huang X, Wang D, Zhao HM, Yang QL, Peng Y, Li JH (2020) Severe deactivation and artificial enrichment of thallium on commercial SCR catalysts installed in cement kiln. Appl Catal B: Environ 277:119194–119201. https://doi.org/10.1016/j.apcatb.2020.119194
Lai JK, Wachs IE (2018) A perspective on the selective catalytic reduction (SCR) of NO with NH3 by supported V2O5-WO3/TiO2 catalysts. ACS Catal 8:6537–6551. https://doi.org/10.1021/acscatal.8b01357
Lai JK, Jaegers NR, Lis BM, Guo MY, Ford ME, Walter E, Wang Y, Hu JZ, Wachs IE (2021) Structure–activity relationships of hydrothermally aged titania-supported vanadium-tungsten oxide catalysts for SCR of NOx emissions with NH3. ACS Catal 11:12096–12111. https://doi.org/10.1021/acscatal.1c02130
Lei TY, Li QC, Chen SF, Liu ZY, Liu QY (2016) KCl-induced deactivation of V2O5-WO3/TiO2 catalyst during selective catalytic reduction of NO by NH3: comparison of poisoning methods. Chem Eng J 296:1–10. https://doi.org/10.1016/j.cej.2016.03.095
Li X, Li XS, Yang RT, Mo JS, Li JH, Hao JM (2017) The poisoning effects of calcium on V2O5-WO3/TiO2 catalyst for the SCR reaction: comparison of different forms of calcium. Mol Catal 434:16–24. https://doi.org/10.1016/j.mcat.2017.01.010
Li SC, Huang WJ, Xu HM, Chen TJ, Ke Y, Qu Z, Yan NQ (2020) Alkali-induced deactivation mechanism of V2O5-WO3/TiO2 catalyst during selective catalytic reduction of NO by NH3 in aluminum hydrate calcining flue gas. Appl Catal B Environ 270:118872–118882. https://doi.org/10.1016/j.apcatb.2020.118872
Liu XL, Zhao ZW, Ning NL, Qin Y, Zhu TY, Liu FG (2020) Ce-Doped V2O5-WO3/TiO2 with low vanadium loadings as SCR catalysts and the resistance of H2O and SO2. Catal Lett 150:375–383. https://doi.org/10.1007/s10562-019-03077-y
Liu GH, Feng MY, Tayyab M, Gong JQ, Zhang M, Yang MY, Lin KF (2021) Direct and efficient reduction of perfluorooctanoic acid using bimetallic catalyst supported on carbon. J Hazard Mater 412:125224. https://doi.org/10.1016/j.jhazmat.2021.125224
Mir N, Salavati-Niasari M (2013) Preparation of TiO2 nanoparticles by using tripodal tetraamine ligands as complexing agent via two-step sol-gel method and their application in dye-sensitized solar cells. Mater Res Bull 48(4):1660–1667. https://doi.org/10.1016/j.materresbull.2013.01.006
Peng Y, Li JH, Shi WB, Xu JY, Hao JM (2012) Design strategies for development of SCR catalyst: improvement of alkali poisoning resistance and novel regeneration method. Environ Sci Technol 46:12623–12629. https://doi.org/10.1021/es302857a
Peng Y, Li JH, Si WZ, Luo JM, Wang Y, Fu J, Li X, Crittenden J, Hao JM (2015) Deactivation and regeneration of a commercial SCR catalyst: comparison with alkali metals and arsenic. Appl Catal B Environ 168–169:195–202. https://doi.org/10.1016/j.apcatb.2014.12.005
Qin Y, Gu J, Cai WT, Wang ZJ (2022) Catalytic oxidation of chlorobenzene and PCDD/Fs over V2O5-WO3/TiO2: insights into the component effect and reaction mechanism. Environ Sci Pollut R 29:42809–42821. https://doi.org/10.1007/s11356-022-18768-0
Richter A, Burrows JP, Nüß H, Granier C, Niemeier U (2005) Increase in tropospheric nitrogen dioxide over China observed from space. Nature 437:129–132. https://doi.org/10.1038/nature04092
Shen BX, Wang YY, Wang FM, Liu T (2014) The effect of Ce-Zr on NH3-SCR activity over MnOx(0.6)/Ce0.5Zr0.5O2 at low temperature. Chem Eng J 236:171–180. https://doi.org/10.1016/j.cej.2013.09.085
Shen Y, Fu Y, Tang SJ, Lu Q, Dong CQ, Zhou JH, Zhuang K (2018) Study on life prediction of SCR denitrification catalyst on basis of gray neural network. J North China Elec Power Univ 45(3):74–80. https://doi.org/10.3969/j.ISSN.1007-2691.2018.03.10
Shi XK, Guo JX, Shen T, Fan AD, Liu YJ, Yuan SD (2021) Improvement of NH3-SCR activity and resistance to SO2 and H2O by Ce modified La-Mn perovskite catalyst. J Taiwan Inst Chem E 126:102–111. https://doi.org/10.1016/j.jtice.2021.06.056
Shi ZW, Peng Q, Jiaqiang E, **e B, Wei J, Yin RX, Fu G (2023) Mechanism, performance and modification methods for NH3-SCR catalysts: A review. Fuel 331:125885–125899. https://doi.org/10.1016/j.fuel.2022.125885
Si ZP, Shen YJ, He JB, Yan TT, Zhang JP, Deng J, Zhang DS (2022) SO2-induced alkali resistance of FeVO4/TiO2 catalysts for NOx reduction. Environ Sci Technol 56:605–613. https://doi.org/10.1021/acs.est.1c05686
Sun Q, Fu YC, Liu JW, Auroux A, Shen JY (2008) Structural, acidic and redox properties of V2O5-TiO2-SO42− catalysts. Appl Catal A 334:26–34. https://doi.org/10.1016/j.apcata.2007.09.023
Tayyab M, Liu YJ, Liu ZG, Pan LH, Xu ZH, Yue WH, Zhou L, Lei JY, Zhang JL (2022) One-pot in-situ hydrothermal synthesis of ternary In2S3/Nb2O5/Nb2C Schottky/S-scheme integrated heterojunction for efficient photocatalytic hydrogen production. J Alloy Com 628:500–512. https://doi.org/10.1016/j.jcis.2022.08.071
Tayyab M, Liu YJ, Min SX, Irfan RM, Zhu QH, Zhou L, Lei JY, Zhang JL (2022) Simultaneous hydrogen production with the selective oxidation of benzyl alcohol to benzaldehyde by a noble-metal-free photocatalyst VC/CdS nanowires. Chin J Catal 43:1165–1175. https://doi.org/10.1016/S1872-2067(21)63997-9
Thirupathi B, Panagiotis GS (2016) Impact of nitrogen oxides on the environment and human health: Mn-based materials for the NOx abatement. Curr Opin Chem Eng 13:133–141. https://doi.org/10.1016/j.coche.2016.09.004
Wachs IE (1996) Raman and IR studies of surface metal oxide species on oxide supports: supported metal oxide catalysts. Catal Today 27:437–455. https://doi.org/10.1016/0920-5861(95)00203-0
Wang D, Chen QZ, Zhang X, Gao C, Wang B, Huang X, Peng Y, Li JH, Lu CM, Crittenden J (2021) Multipollutant control (MPC) of flue gas from stationary sources using SCR technology: a critical review. Environ Sci Technol 55:2743–2766. https://doi.org/10.1021/acs.est.0c07326
Weckhuysen BM, Keller DE (2003) Chemistry, spectroscopy and the role of supported vanadium oxides in heterogeneous catalysis. Catal Today 78:25–46. https://doi.org/10.1016/s0920-5861(02)00323-1
**ong SC, Chen JJ, Liu H, Chen XP, Si WZ, Gong ZG, Peng Y, Li JH (2022) Like cures like: detoxification effect between alkali metals and sulfur over the V2O5/TiO2 deNOx Catalyst. Environ Sci Technol 56:3739–3747. https://doi.org/10.1021/acs.est.2c00113
Yan LJ, Wang FL, Wang PL, Impeng SW, Liu XY, Han LP, Yan TT, Zhang DS (2020) Unraveling the unexpected offset effects of Cd and SO2 deactivation over CeO2-WO3/TiO2 catalysts for NOx reduction. Environ Sci Technol 54:7697–7705. https://doi.org/10.1021/acs.est.0c01749
Yang X, Huang R, Kong FH, Liu W (2013) Activity of SCR denitrification catalyst: measurement and applications. Thermal Power Generation 42(1):15–19. https://doi.org/10.3969/j.issn.1002-3364.2013.01.015
Ye B, Jeong B, Lee MJ, Kim TH, Park SS, Jung J, Lee S, Kim HD (2022) Recent trends in vanadium-based SCR catalysts for NOx reduction in industrial applications: stationary sources. Nano Converg 9:51–57. https://doi.org/10.1186/s40580-022-00341-7
Zhang XY, Wang H, Wang Z, Qu ZP (2018) Adsorption and surface reaction pathway of NH3 selective catalytic oxidation over different Cu-Ce-Zr catalysts. Appl Surf Sci 447:40–48. https://doi.org/10.1016/j.apsusc.2018.03.220
Zhang YH, Hao CC, Zhang J, Wu JZ, Yue Y, Xu YF, Qian GR (2022) Ratio of adsorptive abilities for NH3 and NOx determined SCR activity of transition-metal catalyst. Colloids Surf A: Physicochem Eng Aspects 635:128080–128088. https://doi.org/10.1016/j.colsurfa.2021.128080
Zhao B, Wang SX, LiuH XuJY, Fu K, Klimont Z, Hao JM, He KB, Cofala J, Amann M (2013) NOx emissions in China: historical trends and future perspectives. Atmos Chem Phys 13:9869–9897. https://doi.org/10.5194/acpd-13-16047-2013
Zhao K, Han W, Lu G, Lu J, Tang Z, Zhen X (2016) Promotion of redox and stability features of doped Ce-W-Ti for NH3-SCR reaction over a wide temperature range. Appl Surf Sci 379:316–322. https://doi.org/10.1016/j.apsusc.2016.04.090
Zheng Y, Guo YY, Wang J, Luo L, Zhu TY (2021) Ca do** effect on the competition of NH3-SCR and NH3 oxidation reactions over vanadium-based catalysts. J Phys Chem C 125:6128–6136. https://doi.org/10.1021/acs.jpcc.1c00677
Zhu MH, Lai JK, Tumuluri U, Wu Z, Wachs IE (2017) Nature of active sites and surface intermediates during SCR of NO with NH3 by supported V2O5-WO3/TiO2 catalysts. J Am Chem Soc 139:15624–15627. https://doi.org/10.1021/jacs.7b09646
Zinatloo-Ajabshir S, Baladi M, Salavati-Niasari M (2021) Enhanced visible-light-driven photocatalytic performance for degradation of organic contaminants using PbWO4 nanostructure fabricated by a new, simple and green sonochemical approach. Ultrason Sonochem 72:105420. https://doi.org/10.1016/j.ultsonch.2020.105420
Funding
This work was supported by the BBMG Group Project Bureau (B20212006).
Author information
Authors and Affiliations
Contributions
Yu Qin: investigation, formal analysis, original draft writing, review, and editing; Wentao Cai: resources and review; Zeyan Li: experimental data curation; Genan Li: experimental data curation; Pengfei Liu: experimental data curation; Baodeng An: resources and supervision; Kan Wu: resources and supervision; Jun Gu: review.
Corresponding author
Ethics declarations
Ethics approval and consent to participate
Not applicable.
Consent for publication
Not applicable.
Competing interests
The authors declare no competing interests.
Additional information
Responsible Editor: George Z. Kyzas
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Qin, Y., Cai, W., Li, Z. et al. Ce doped V-W/Ti as selective catalytic reduction catalysts for cement kiln flue gas denitration. Environ Sci Pollut Res 31, 2053–2066 (2024). https://doi.org/10.1007/s11356-023-31165-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-023-31165-5