The results of investigation of the formation of surfaced metal and its joints with basic metal under plasma surfacing on copper with powders based on nickel or cobalt are presented. The nickel-based PG-SR4 powder provides the best results regarding welding and technological properties. When using PN-AN34 powder individual defects are found in the surfaced metal in the form of interlayers and individual inclusions of copper in the surfaced layer of cobalt-based metal.
Similar content being viewed by others
References
M. A. Tylkin, Improvement of Service Life of Metallurgical Equipment Parts [in Russian], Metallurgia, Moscow (1971).
I. A. Riabtsev, I. A. Senchenkov, and E. V. Turyk, Surfacing. Materials, Technologies, Mathematical Modelling, Gliwice: Wydawnictwo Politechniki Slaskiej (2015).
S. M. Hurevych, A Handbook on Non-Ferrous Welding [in Russian], Naukova Dumka, Kyiv (1990).
A. A. Babinets, I. O. Ryabtsev, I. P. Lentyugov, I. I. Ryabtsev, Yu. V. Demchenko, and A. I. Panfilov, “Problems and prospects of surfacing of copper and copper parts by wear-resistant layers (Review),” The Paton Welding J., Is. 5, 15–23 (2020); https://doi.org/10.37434/tpwj2020.05.03.
D. R. Lida, and W. Haynes, CRC Handbook of Chemistry and Physics: a ready-reference book of chemical and physical data, Boca Raton: Taylor & Francis (2018).
P. V. Gladkyi, E. F.Pereplyotchikov, and I. A. Ryabtsev, Plasma Surfacing [in Russian], Ekotekhnologiya, Kyiv (2007).
E. F. Perepl’otchikov, Kh. B. Vasyliv, V. A. Vynar, I. O. Ryabtsev, and V. I. Zakiev, “Elevation of the wear resistance of low-alloy structural steel by plasma-powder surfacing with alloys based on iron, chromium, and nickel,” Mater. Sci., 54, No. 3, 378–386 (2018); https://doi.org/10.1007/s11003-018-0195-y.
C. C. Silva, de E. C. Miranda, M. F. Motta, de H. C. Miranda, and J. P. Farias, “Dilution control of weld overlay superalloys using Taguchi method”, in: Proc. of the ASME 31st Int. Conf. on Ocean, Offshore and Arctic Eng., Is. 6, 289–299 (2012).
W. Robert jr Messle, A Practical Guide to Welding Solutions: Overcoming Technical and Material-Specific Issues, Wiley-VCH (2019); https://doi.org/10.1002/9783527818815.
T. B. Massalski, Binary Alloy Phase Diagrams, Ohio: Materials Park, ASM International (2007).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 58, No. 5, pp. 87–94, September–October, 2022.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Ryabtsev, I.O., Perepletchikov, E.F., Babinets, A.A. et al. Plasma-Powder Surfacing of Alloys Based on Nickel and Cobalt on Copper. Mater Sci 58, 649–656 (2023). https://doi.org/10.1007/s11003-023-00712-3
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-023-00712-3