Abstract
The combination of nitrogen and phosphorus compounds has synergistic flame retardant effect, but the addition of low phosphorus content compounds is large, which affects the mechanical properties of polymers. Phosphorus ammonium polyphosphate (APP) with high phosphorus content and graphitic carbon nitride (g-C3N4) doped with SiO2 were used for the flame retardant (CN-Si-APP) of polyamide 6 (PA6). CN-Si-APPs with different APP/CN mass ratio (1, 2.5 and 4) and dosage (7 and 12 wt%) were blended with PA6 via a twin-screw extruder, and their flame retardancy was investigated by limiting oxygen index (LOI), UL-94 test, muffle furnace carbonization test and raman spectroscopy. When only APP added, the coefficient of water absorption (CWA) of composites increased and its tensile strength greatly reduced by nearly 37.1% to 35.39 MPa. The addition of g-C3N4 inhibited the water absorption. When the addition dosage is 7%, the CWA of PA6/APP, PA6/CN-Si-APP2.5, PA6 and PA6/CN were 11.1, 6.86, 5.78 and 4.6%, respectively. SiO2 effectively improved the dispersion of g-C3N4 and the mechanical properties of composites. Thermogravimetric analysis (TGA) showed that the char residue of PA6 composites was improved significantly. The composite with 7 wt% CN-Si-APP4 passed the UL-94 V-0 rating. The LOI value and graphitization degree (ID/IG) of PA6/12 wt% CN-Si-APP2.5 reached 28.7% and 2.93 respectively. Under the same dosage, the graphitization degree of CN-Si-APP2.5 (3.51) was higher than that of g-C3N4 (3.98). The barrier protection of g-C3N4, catalytic effect of APP and SiO2 crosslinking network promoted PA6 to form a dense and stable char layer, which protected PA6 composites from the flame. The strategy of synergistic flame retardant in this paper provides a valuable solution for reducing the amount of flame retardant.
Similar content being viewed by others
Data availability
The authors confirm that the data supporting the findings of this study are available within the article.
References
Tao W, Hu X, Sun J et al (2020) Effects of P-N flame retardants based on cytosine on flame retardancy and mechanical properties of polyamide 6. Polym Degrad Stab 174
Wentao H, Gao J, Liao S et al (2019) A facile method to improve thermal stability and flame retardancy of polyamide 6. Compos Comm 13:143–150
** and mechanical properties. RSC Adv 9(14):7620–7628
Li M, Zhong Y, Wang Z et al (2016) Flame retarding mechanism of Polyamide 6 with phosphorus-nitrogen flame retardant and DOPO derivatives. J Appl Polym Sci 133(6):42932
Zheng T, **a W, Guo J et al (2020) Modified magnesium hydroxide encapsulated by melamine cyanurate in flame-retardant polyamide-6. J Polym Res 27(9):258–268
Wang S, Li W, Chen Y et al (2022) Toxicity evaluation of decabromodiphenyl ethane (DBDPE) to Pleurotus ostreatus: Oxidative stress, morphology and transcriptomics. J Hazard Mater 431
Lin G-P, Chen L, Wang X-L et al (2013) Aluminum Hydroxymethylphosphinate and Melamine Pyrophosphate: Synergistic Flame Retardance and Smoke Suppression for Glass Fiber Reinforced Polyamide 6. Ind Eng Chem Res 52(44):15613–15620
Malkappa K, Ray SS (2019) Thermal Stability, Pyrolysis Behavior, and Fire-Retardant Performance of Melamine Cyanurate@Poly(cyclotriphosphazene-co-4,4'-sulfonyl diphenol) Hybrid Nanosheet-Containing Polyamide 6 Composites. ACS Omega 4(6):9615–9628
**g J, Chen Z, Feng C et al (2021) Transforming g-C3N4 from amphoteric to n-type semiconductor: The important role of p/n type on photoelectrochemical cathodic protection. J Alloy Compd 851
Ren Y, Han Q, Zhao Y et al (2021) The exploration of metal-free catalyst g-C3N4 for NO degradation. J Hazard Mater 404
Wang Y, Yang W, Chen X et al (2018) Photocatalytic activity enhancement of core-shell structure g-C3N4@TiO2 via controlled ultrathin g-C3N4 layer. Appl Catal B 220:337–347
**a Y, Zhang N, Zhou Z et al (2020) Incorporating SiO2 functionalized g-C3N4 sheets to enhance anticorrosion performance of waterborne epoxy. Prog Org Coat 147
Leng Y, Xu MJ, Sun Y et al (2019) Simultaneous enhancement of thermal conductivity and flame retardancy for epoxy resin thermosets through self-assemble of ammonium polyphosphate surface with graphitic carbon nitride. Polym Adv Technol 30(9):2468–2479
Shi Y, Yu B, Zhou K et al (2015) Novel CuCo2O4/graphitic carbon nitride nanohybrids: Highly effective catalysts for reducing CO generation and fire hazards of thermoplastic polyurethane nanocomposites. J Hazard Mater 293:87–96
Xu W, Chen R, Xu J et al (2020) Nickel hydroxide and zinc hydroxystannate dual modified graphite carbon nitride for the flame retardancy and smoke suppression of epoxy resin. Polym Degrad Stab 182
Xu W, Yan H, Wang G et al (2021) A silica-coated metal-organic framework/graphite-carbon nitride hybrid for improved fire safety of epoxy resins. Mater Chem Phys 258
Li J, Wu W, Meng W et al (2021) Nickel Ammonium Phosphate Nanowires Modified g-C3N4 for Improving the Fire Safety of Epoxy Resin. Fibers Polym 22(10):2664–2672
Zheng T, Wang W, Liu Y (2021) A novel phosphorus-nitrogen flame retardant for improving the flame retardancy of polyamide 6: Preparation, properties, and flame retardancy mechanism. Polym Adv Technol 32(6):2508–2516
Liu T, **g J, Zhang Y et al (2018) Synthesis of a novel polyphosphate and its application with APP in flame retardant PLA. RSC Adv 8(8):4483–4493
**e W, Huang S, Liu S et al (2019) A biobased Schiff base from protocatechualdehyde and its application in flame-retardant, low-smoke epoxy resin systems. RSC Adv 9(53):30815–30822
Huang Z, Ruan B, Wu J et al (2020) High-efficiency ammonium polyphosphate intumescent encapsulated polypropylene flame retardant. J Appl Polym Sci 138(20):50413
Fan S, Sun Y, Wang X et al (2020) A novel organic-inorganic flame retardant of ammonium polyphosphate chemically coated by Schiff base-containing branched polysiloxane for polyamide 6. Polym Adv Technol 31(11):2763–2774
Liu J-C, Xu M-J, Lai T et al (2015) Effect of Surface-Modified Ammonium Polyphosphate with KH550 and Silicon Resin on the Flame Retardancy, Water Resistance, Mechanical and Thermal Properties of Intumescent Flame Retardant Polypropylene. Ind Eng Chem Res 54(40):9733–9741
Shao Z-B, Deng C, Tan Y et al (2014) Flame retardation of polypropylene via a novel intumescent flame retardant: Ethylenediamine-modified ammonium polyphosphate. Polym Degrad Stab 106:88–96
Hoang D-T, Schorr D, Landry V et al (2018) Preparation and characterisation of flame retardant encapsulated with functionalised silica-based shell. J Microencapsul 35(5):428–438
Feng Y, Wu W, Wang Z et al (2022) POSS-modified ammonium polyphosphate for improving flame retardant of epoxy resins. Polym Adv Technol 33(4):1190–1201
Shen M-Y, Chen W-J, Kuan C-F et al (2016) Preparation, characterization of microencapsulated ammonium polyphosphate and its flame retardancy in polyurethane composites. Mater Chem Phys 173:205–212
Qu L, Sui Y, Zhang C et al (2020) Improved flame retardancy of epoxy resin composites modified with a low additive content of silica-microencapsulated phosphazene flame retardant. React Funct Polym 148
Lin D, Zeng X, Li H et al (2019) One-pot fabrication of superhydrophobic and flame-retardant coatings on cotton fabrics via sol-gel reaction. J Colloid Interface Sci 533:198–206
Rao W, Shi J, Yu C et al (2021) Highly efficient, transparent, and environment-friendly flame-retardant coating for cotton fabric. Chem Eng J 424
Chen Z, Zhang W, Yu Y et al (2022) Multi-walled carbon nanotubes encapsulated by graphitic carbon nitride with simultaneously co-do** of B and P and ammonium polyphosphate to improve flame retardancy of unsaturated polyester resins. Mater Chem Phys 277
Dong H, Wang Y, Feng T et al (2022) Phytic acid doped polyaniline-coupled g-C3N4 nanosheets for synergizing with APP promoting fire safety and waterproof performance of epoxy composites. Polym Degrad Stab 198
Guo C, Zhao Y, Ji G et al (2020) Organic Aluminum Hypophosphite/Graphitic Carbon Nitride Hybrids as Halogen-Free Flame Retardants for Polyamide 6. Polymers (Basel) 12(10):2323–2337
Zhang Y, Zhao Y, Wang Z et al (2022) Synergistic effect of graphitic carbon nitride and ammonium polyphosphate on the enhanced flame retardant and smoke suppression properties of biobased polyamide 56. J Vinyl Add Tech 28(3):615–630
Kim M, Ko H, Park S-M (2019) Synergistic effects of amine-modified ammonium polyphosphate on curing behaviors and flame retardation properties of epoxy composites. Compos Part B: Eng 170:19–30
Li WX, Zhang HJ, Hu XP et al (2020) Highly efficient replacement of traditional intumescent flame retardants in polypropylene by manganese ions doped melamine phytate nanosheets. J Hazard Mater 398
Dong H, Liu W, Chen W et al (2021) Novel C3N4/PANI@PA for enhancement of fire protection and smoke suppression in intumescent fire retardant epoxy coatings. Prog Org Coat 161
Zhou Y, Lin Y, Tawiah B et al (2021) DOPO-Decorated Two-Dimensional MXene Nanosheets for Flame-Retardant, Ultraviolet-Protective, and Reinforced Polylactide Composites. ACS Appl Mater Interfaces 13(18):21876–21887
Mu X, **ao Y, Cai W et al (2022) Hierarchical core-shell SiO2@COFs@metallic oxide architecture: An efficient flame retardant and toxic smoke suppression for polystyrene. J Colloid Interface Sci 605:241–252
**ao G, Yang Z, Chen C et al (2021) Novel carbon nitride@polydopamine/molybdenum disulfide nanoflame retardant improves fire performance of composite coatings. Colloids Surf A: Physicochem Eng Aspects 630
Wang J, Zhou H, Wang Z et al (2022) Constructing hierarchical structure based on LDH anchored boron-doped g-C3N4 assembled with MnO2 nanosheets towards reducing toxicants generation and fire hazard of epoxy resin. Compos Part B: Eng 229
Chen C, Dong S, **ao G et al (2021) Flame retardant properties of waterborne epoxy intumescent coatings reinforced by polydopamine@KH560/carbon nitride/graphene ternary system. Colloids Surf, A 620
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Li, H., Chen, L., Li, Z. et al. Synergistic effect of SiO2 doped g-C3N4 and ammonium polyphosphate on flame retardancy of PA6 composites. J Polym Res 30, 386 (2023). https://doi.org/10.1007/s10965-023-03707-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10965-023-03707-5