Abstract
Idea development in the early phases of the design process often involves the transformation of initial concepts into more feasible alternatives. However, this important component of design activity is often under-emphasized in design education, and tools to facilitate iteration of designs are limited. This study investigated Design Heuristics as a tool for the further development of initial concepts created by student designers. In a single session, advanced engineering students created initial concepts, and then used Design Heuristics to transform these concepts into alternative designs. The concept sets generated were analyzed, and eight types of transformations were identified, including the enhancement of aesthetics, features, functions, settings, materials, sizes, organizations, and usability. Design Heuristics supported students’ concept development by providing specific suggestions about ways to iterate on their initial concepts. As a result, students explored alternative concepts by producing multiple transformations of their designs, and were more likely to select these transformed concepts as their most creative, unique, and favourite designs.
Similar content being viewed by others
References
Adamson, R. (1952). Functional fixedness as related to problem solving: A repetition of three experiments. Journal of Experimental Psychology, 44(4), 288–291.
Allen, M. (1962). Morphological creativity: The miracle of your hidden brain power. New Jersey: Prentice-Hall.
Altshuller, G. (1997). 40 Principles: TRIZ keys to technical innovation. Worcester, Mass.: Technical Innovation Center Inc.
Atman, C. J., Adams, R. S., Cardella, M. E., Turns, J., Mosborg, S., & Saleem, J. (2007). Engineering design processes: A comparison of students and expert practitioners. Journal of Engineering Education, 96, 359–379.
Brown, T. (2009). Change by design. New York: HarperCollins.
Christian, J. L., Daly, S. R., Yilmaz, S., Seifert, C., & Gonzalez, R. (2012). Design Heuristics support two modes of idea generation: Initiating ideas and transitioning among concepts. In American society of engineering education conference proceedings.
Chusilp, P., & **, Y. (2006). Impact of mental iteration on concept generation. Journal of Mechanical Design, 128(1), 14–25.
Crilly, N. (2015). Fixation and creativity in concept development: The attitudes and practices of expert designers. Design Studies, 38, 54–91.
Daly, S. R., Christian, J. L., Yilmaz, S., Seifert, C. M., & Gonzalez, R. (2011). Teaching design ideation. In Proceedings of American society for engineering education annual conference, (AC 2011-1569), Vancouver, BC, Canada.
Daly, S. R., Christian, J., Yilmaz, S., Seifert, C., & Gonzalez, R. (2012a). Assessing Design Heuristics in idea generation within an introductory engineering design course. International Journal of Engineering Education, 28(2), 463–473.
Daly, S. R., Seifert, C. M., Yilmaz, S., & Gonzalez, R. (2016). Comparing ideation techniques for beginning designers. Journal of Mechanical Design, 138(10), 101108–101112. https://doi.org/10.1115/1.4034087.
Daly, S., Yilmaz, S., Christian, J., Seifert, C., & Gonzalez, R. (2012b). Design Heuristics in engineering concept generation. Journal of Engineering Education, 101(4), 601–629.
Daly, S., Yilmaz, S., Seifert, C., Gonzalez, R. (2010). Cognitive heuristic use in engineering design ideation. In Proceedings of the American society for engineering education (AC 2010-1032). Washington, DC: American Society for Engineering Education.
De Carvalho, M. A., Wei, T. C., & Savransky, S. D. (2001) Validation of Heuristics for Systems Transformations. In Proceedings of TRIZCON2001, Altshuller Institute, Woodland Hills, CA.
Design Council (2007). Eleven lessons: managing design in eleven global brands. A study of the design process. Design Council, UK, http://www.designcouncil.org.uk/resources/report/11-lessons-managing-design-global-brands. Accessed 20 November 2017.
Diehl, M., & Wolfgang, S. (1987). Productivity loss in brainstorming groups: Toward the solution of a riddle. Journal of Personality and Social Psychology, 53(3), 497–509.
Eberle, B. (1996). Scamper: Games for imagination development. Waco, TX: Prufrock Press.
Fogler, S., LeBlanc, S., & Rizzo, B. (2013). Strategies for creative problem solving. New Jersey: Prentice Hall.
Girotra, K., Terwiesch, C., & Ulrich, K. T. (2010). Idea generation and the quality of the best idea. Management Science, 56(4), 591–605.
Goldschmidt, G., & Tatsa, D. (2005). How good are good ideas? Correlates of design creativity. Design Studies, 26(6), 593–611.
Jansson, D. G., & Smith, S. M. (1991). Design fixation. Design Studies, 12(1), 3–11.
Jensen, T. & Andreasen, M. (2010). Design methods in practice—beyond the ‘systematic approach’ of Pahl & Beitz. In International design conference—design 2010 (pp. 1–10). Dubrovnik, Croatia.
**, Y., & Chusilp, P. (2006). Study of mental iteration in different design situations. Design Studies, 27(1), 25–55.
Kimbell, R. (1982). Design education: the foundation years. London: Routledge.
Kramer, J., Daly, S. R., Yilmaz, S., Seifert, C. M., & Gonzalez, R. (2015). Investigating the impacts of Design Heuristics on idea initiation and development. Advances in Engineering Education, 4(4), 1.
Landis, J. R., & Koch, G. G. (1977). The measurement of observer agreement for categorical data. Biometrics, 33(1), 159–174.
Laughlin, P., Bonner, B., & Miner, A. (2002). Groups perform better than the best individuals on letters-to-numbers problems. Organizational Behavior and Human Decision Processes, 88(2), 605–620.
Leahy, K., & Phelan, P. (2014). A review of Technology Education in Ireland; a changing technological environment promoting design activity. International Journal of Technology and Design Education, 24, 375–389.
Linsey, J. S., Tseng, I., Fu, K., Cagan, J., Wood, K. L., & Schunn, C. (2010). A study of design fixation, its mitigation and perception in engineering design faculty. Journal of Mechanical Design, 132, 041003.
Maier, N. R. (1931). Reasoning in humans. II. The solution of a problem and its appearance in consciousness. Journal of Comparative Psychology, 12(2), 181–194.
McHugh, M. L. (2012). Interrater reliability: the kappa statistic. Biochemia medica, 22(3), 276–282.
Moreno, D. P., Yang, M. C., Hernandez, A., & Wood, K. L. (2014). Creativity in transactional design problems: Non-intuitive findings of an expert study using scamper. In International design conference, human behavior and design (pp. 569–578). Dubrovnik, Croatia.
Mullen, B., Johnson, C., & Salas, E. (1991). Productivity loss in brainstorming groups: A meta-analytic integration. Basic and Applied Social Psychology, 12(1), 3–23.
Osborn, A. F. (1957). Applied Imagination: Principles and Procedures of Creative Thinking (Vol. 3 Revised). New York: Charles Scribner’s Sons.
Pahl, G., & Beitz, W. (2007). Engineering design: A systematic approach. Berlin: Springer.
Paulus, Paul B., & Dzindolet, Mary T. (1993). Social influence processes in group brainstorming. Journal of Personality and Social Psychology, 64(4), 575–586. https://doi.org/10.1037/0022-3514.64.4.575.
Perttula, M., & Sipila, P. (2007). The idea exposure paradigm in design idea generation. Journal of Engineering Design, 18(1), 93–102.
Polovinkin, A. I. (1988). The ABC of engineering creativity. Moscow: Mashinostroenie (in Russian).
Polovinkin, A. I. (1991). Theory of new technique design: Laws of technical systems and their applications. Moscow: Informelektro (in Russian).
Purcell, A. T., & Gero, J. S. (1996). Design and other types of fixation. Design Studies (Special Issue: Design Cognition and Computation), 17(4), 363–383.
Römer, A., Weißhahn, G., & Hacker, W. (2001). Effortsaving product representations in design: Results of a questionnaire survey. Design Studies, 22, 473–490.
Runco, M. A., & Jaeger, G. J. (2012). The standard definition of creativity. Creativity Research Journal, 24(1), 92–96. https://doi.org/10.1080/10400419.2012.650092.
Shah, J. J., Smith, S. M., & Vargas-Hernandez, N. (2003). Metrics for measuring ideation effectiveness. Design Studies, 24(2), 111–134.
Singh, V., Skiles, S. M., Krager, J. E., Wood, K. L., Jensen, D., & Sierakowski, R. (2009). Innovations in design through transformation: A fundamental study of transformation principles. Journal of Mechanical Design, 131(8), 081010.
Singh, V., Walter, B., Krager, J., Putnam, N., Koraishy. B., Wood. K., & Jensen, D. (2007). Design for transformation: Theory, method and application. In Proceedings of the IDETC/CIE 2007, ASME 2007 international design engineering technical conferences and computers and information in engineering conference, September, Las Vegas, NV.
Smith, R. P., & Ep**er, S. D. (1997). Identifying controlling features of engineering design iteration. Management Science, 43(3), 276–293.
Tessari, R. K., & De Carvalho, M. A. (2015). Compilation of heuristics for inventive problem solving. Procedia Engineering, 131, 50–70.
Tsenn, J., Atilola, O., McAdams, D. A., & Linsey, J. S. (2014). The effects of time and incubation on design concept generation. Design Studies, 35(5), 500–526.
Weaver, J., Wood, K., Crawford, R., & Jensen, D. (2010). Transformation design theory: A meta-analogical framework. Journal of Computing and Information Science in Engineering, 10, 31012-1.
Weaver, J., Wood, K., & Jensen, D. (2008). Transformation facilitators: A quantitative analysis of reconfigurable products and their characteristics. In Proceedings of the ASME 2008 international design engineering conferences and computers and information in engineering conference, IDETC/CIE 2008, Brooklyn, New York, USA.
Yilmaz, S., Daly, S. R., Christian, J. L., Seifert, C. M., & Gonzalez, R. (2013). Can experienced designers learn from new tools? A case study of idea generation in a professional engineering team. International Journal of Design Creativity and Innovation, 2, 1–15.
Yilmaz, S., Daly, S. R., Christian, J. L., Seifert, C. M., & Gonzalez, R. (2014). 77 Cards: Design heuristics for inspiring ideas. Ames, IA: Design Heuristics Inc.
Yilmaz, S., Daly, S. R., Seifert, C. M., & Gonzalez, R. (2015). How do designers generate new ideas? Design heuristics across two disciplines. Design Science. https://doi.org/10.1017/dsj.2015.4.
Yilmaz, S., Daly, S. R., Seifert, C. M., & Gonzalez, R. (2016a). Evidence-based Design Heuristics for idea generation. Design Studies, 46, 95–124.
Yilmaz, S., & Seifert, C. M. (2011). Creativity through Design Heuristics: A case study of expert product design. Design Studies, 32(4), 384–415.
Yilmaz, S., Seifert, C. M., Daly, S. R., & Gonzalez, R. (2016b). Design strategies in innovative products. Journal of Mechanical Design, 138(7), 071102–071112. https://doi.org/10.1115/1.4032219.
Yilmaz, S., Seifert, C. M., & Gonzalez, R. (2010). Cognitive heuristics in design: Instructional strategies to increase creativity in idea generation. Journal of Artificial Intelligence in Engineering Design and Manufacturing, 24, 335–355.
Zhang, X., Hao, Y., & Thomson, V. (2015). Taking ideas from paper to practice: a case study of improving design processes through detailed modeling and systematic analysis. IFAC-PapersOnLine, 48(3), 1043–1048.
Zwicky, F. (1969). Discovery, invention, research through the morphological approach. New York: Macmillan.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Leahy, K., Daly, S.R., Murray, J.K. et al. Transforming early concepts with Design Heuristics. Int J Technol Des Educ 29, 759–779 (2019). https://doi.org/10.1007/s10798-018-9473-0
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10798-018-9473-0