Abstract
The aim of this study is to investigate the mechanisms and kinematic characteristics of landslides in the southwestern mountainous regions of China. Field surveys and aerial photography were conducted to establish a discrete element method model with calibrated mesomechanical parameters. By considering internal and external triggering factors, a coupled finite difference and discrete element method was used to simulate the deformation, failure mechanism and movement process of slopes as well as to analyse the characteristics of debris movement. The findings revealed that the unique lithological and unfavourable geological structures resulted in an extremely fragmented rock mass, which was the internal cause of landslides. The main external cause was the mining of coal seams beneath the slumped mass, leading to extensive cracks at the trailing edge of the slope and subsequent debris movement. The average velocity of the slumped mass exhibited fluctuation before 3.5 s, followed by a rapid increase at 3.5 s, reaching a maximum speed of approximately 9.5 m/s at 9.8 s. The velocity and displacement of the debris gradually decreased from the bottom to the top in the sliding source area. The maximum displacement of the debris was 1.24 km. The entire landslide process lasted approximately 47 s, with the debris accumulating mostly at the toe of the slope. The research findings provide valuable theoretical support for the prevention and control of geological hazards induced by underground mining activities.
Similar content being viewed by others
Change history
03 December 2023
The affiliation of corresponding author has been updated.
References
Cui F, Li B, **ong C et al (2022) Dynamic triggering mechanism of the Pusa mining-induced landslide in Nayong County, Guizhou Province, China. Geomat Nat Hazard Risk 13(1):123–147. https://doi.org/10.1080/19475705.2021.2017020
Fu Q, Yang K, Wei Z et al (2023) Study on ultimate strength and dip effect of coal pillar in steeply dip** coal seam. Geotech Geol Eng 41:3447–3457
Guo S, Xu P, Zheng Z et al (2015) Estimation of flow velocity for a debris flow via the two-phase fluid model. Nonlinear Process Geophys 22(1):109–116. https://doi.org/10.5194/npg-22-109-2015
Han Z, Chen G, Li Y et al (2015) Exploring the velocity distribution of debris flows: an iteration algorithm based approach for complex cross-sections. Geomorphology 241:72–82. https://doi.org/10.1016/j.geomorph.2015.03.043
Huo YM, Song XM, Zhu DF (2020) Numerical investigation of top-coal migration in the first coal-drawing process by an FDM–DEM coupling method. Energies 13(20):5493. https://doi.org/10.3390/en13205493
Jones DB, Siddle HJ, Reddish DJ et al (1991) Landslides and undermining: slope stability interaction with mining subsidence behaviour. ln: Wittke W (ed) Proceedings of the 7th international society of rock mechanics (ISRM) congress. International Society for Rock Mechanics, Aachen, pp 893–898
Kulatilake PHSW, Ge Y (2014) Investigation of stability of the critical rock blocks that initiated the Jiweishan landslide in China. Geotech Geol Eng 32(5):1291–1315. https://doi.org/10.1007/s10706-014-9806-z
Li B, Wang GZ, Feng Z et al (2015) Failure mechanism of steeply inclined rock slopes induced by underground mining. Chin J Rock Mech Eng 34(6):1148–1161
Li M, Yu H, Wang J et al (2015) A multiscale coupling approach between discrete element method and finite difference method for dynamic analysis. Int J Numer Methods Eng 102(1):1–21. https://doi.org/10.1002/nme.4771
Li H, Shi WB, Zhu YQ et al (2020) Study on the formation mechanism of 7.23 catastrophic landslide in Shuicheng County, Guizhou Province. J Nat Disasters 29(6):188–198
Li B, Gong W, Tang H et al (2021) Probabilistic analysis of a discrete element modelling of the runout behavior of the Jiweishan landslide. Int J Numer Anal Met 45(8):1120–1138. https://doi.org/10.1002/nag.3199
Marschalko M, Yilmaz I, Křístková V et al (2012) Determination of actual limit angles to the surface and their comparison with the empirical values in the Upper Silesian Basin (Czech Republic). Eng Geol 124(3):130–138. https://doi.org/10.1016/j.enggeo.2011.10.010
Regassa B, Xu N, Mei G (2018) An equivalent discontinuous modeling method of jointed rock masses for DEM simulation of mining-induced rock movements. Int J Rock Mech Min 108(1):1–14. https://doi.org/10.1016/j.ijrmms.2018.04.053
Salmi EF, Nazem M, Karakus M (2017) Numerical analysis of a large landslide induced by coal mining subsidence. Eng Geol 217:141–152. https://doi.org/10.1016/j.enggeo.2016.12.021
Scaringi G, Fan X, Xu Q et al (2018) Some considerations on the use of numerical methods to simulate past landslides and possible new failures: the case of the recent **nmo landslide (Sichuan, China). Landslides 15(7):1359–1375. https://doi.org/10.1007/s10346-018-0953-9
Shi WB, Yu XX, Sherizadeh T et al (2019) Deformation and failure mechanism of a collapse induced by underground mining—a study of the Pusa collapse in Guizhou province of China. In: Proceedings of the 53rd US Rock mech/geomech symposium, New York, pp 23–26
Shu DM, Bhattacharyya AK (1992) Influence of the slo** of ground surfaces on mine subsidence. In: Proceedings of 11th international conference on ground control in mining, University of Wollongong, pp 475–482
Tan X, Feng L, Hu Z et al (2021) The equivalent shear strength properties of the composite soil reinforced by stone columns: an FDM-DEM-coupled numerical evaluation. Environ Earth Sci 80(4):1–12. https://doi.org/10.1007/s12665-021-09412-0
Wang XM, **ao YJ, Shi WB et al (2022) Forensic analysis and numerical simulation of a catastrophic landslide of dissolved and fractured rock slope subject to underground mining. Landslides 19(6):1045–1067. https://doi.org/10.1007/s10346-021-01842-y
**ao P, Li D, Zhao G et al (2020) Mechanical properties and failure behavior of rock with different flaw inclinations under coupled static and dynamic loads. J Cent South Univ 27(10):2945–2958. https://doi.org/10.1007/s11771-020-4520-x
**ng A, Wang G, Li B et al (2015) Long-runout mechanism and landsliding behaviour of large catastrophic landslide triggered by heavy rainfall in Guanling, Guizhou, China. Can Geotech J 52(7):971–981. https://doi.org/10.1139/cgj-2014-0122
**ong SZ, Shi WB, Wang Y et al (2022) Deformation and failure process of slope caused by underground mining: a case study of Pusa collapse in Nayong County, Guizhou Province. China. Geofluids 2022:19. https://doi.org/10.1155/2022/1592703
Yang C, Shi W, Peng X et al (2022) Numerical simulation of layered anti-inclined mining slopes based on different free face characteristics. B Eng Geol Environ 81:359. https://doi.org/10.1007/s10064-022-02855-0
Yang Z, Zhao Q, Liu X et al (2022) Experimental study on the movement and failure characteristics of Karst mountain with deep and large fissures induced by coal seam mining. Rock Mech Rock Eng 55:4839–4867. https://doi.org/10.1007/s00603-022-02910-y
Yilmaz I, Marschalko M (2012) A leaning historical monument formed by underground mining effect: an example from Czech Republic. Eng Geol 133:43–48. https://doi.org/10.1016/j.enggeo.2012.02.011
Yin YP, Sun P, Zhang M et al (2011) Mechanism on apparent dip sliding of oblique inclined bedding rockslide at Jiweishan, Chongqing, China. Landslides 8(1):49–65. https://doi.org/10.1007/s10346-010-0237-5
Zhang M, Wu L, Zhang J et al (2019) The 2009 Jiweishan rock avalanche, Wulong, China: deposit characteristics and implications for its fragmentation. Landslides 16(5):893–906. https://doi.org/10.1007/s10346-019-01142-6
Zhang SB, Shi WB, Wang Y et al (2023) Numerical evaluation of the deformation and failure mechanisms and movement processes of the Guanling landslide in Guizhou, China. Landslides 20:1747–1762. https://doi.org/10.1007/s10346-023-02059-x
Zhao JJ, **ao JG, **ang XQ et al (2014) Failure mechanism numerical simulation of mining landslide with gentle bedding coal strata. J China Coal Soc 39(3):424–429
Zhao JJ, Wang ZX, Yan HY et al (2022) Deformation characteristics of a high and steep mining slope with gently-inclined layered structure. Hydrogeol Eng Geol 49(2):174–183
Funding
This study is financially supported by the National Natural Science Foundation of China (Grant No. 42067046), the Science and Technology Planning Project of Guizhou Province, China (Grant No. QKHJC-ZK [2021] YB228) and the Startup Research Foundation for High-Level Talents of Guizhou University (Grant No. 2017077).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors have no relevant financial or nonfinancial interests to disclose.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Yang, Y., Li, J., Shi, W. et al. Numerical Investigation of Failure Characteristics and Debris Movement in the Madaling Landslide Using Coupled FDM–DEM. Geotech Geol Eng 42, 2745–2765 (2024). https://doi.org/10.1007/s10706-023-02703-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10706-023-02703-2