Abstract
The effect of nanofiber addition on the physical–mechanical properties of industrial chemimechanical pulp handsheets was evaluated. The nanofibers (3 wt%) were added to industrial pulps taken from two positions of the approach flow, trying to reproduce the real paper machine process. Significant correlations between the characteristics of the cellulose nanofibers, the drainability of pulp suspensions, and the physical–mechanical properties of handsheets were found. The increase in the degree of fibrillation decreased significantly the drainability of the pulp suspensions. Nanofibrillation yield, transmittance, viscosity at 0.5% consistency, and carboxylic content positively correlated with °SR, whereas turbidity, and ξ-potential correlated negatively. Nanofiber incorporation increased Tensile Index (up to 21%), Burst Index (23–37%), E modulus (up to 17%), concora medium test (up to 27%), ring crush test (up to 28%), and short-span compression test values up to 23% in the handsheets where nanofibers from bleached kraft pulp were added. A positive correlation was found between the Tensile Index and nanofibrillation yield, and between E modulus and viscosity at 0.5% consistency for all pulps and a high linear relationship between both variables was found for nanofibers from pine pulps. Finally, the values of air permeability decreased up to 80% respect to the control.
Similar content being viewed by others
Abbreviations
- AFM:
-
Atomic force microscopy
- AQ:
-
Anthraquinone
- BI:
-
Burst Index
- CC:
-
Carboxylic content
- CD:
-
Cationic demand
- CMT:
-
Cóncora medium test
- CNFS:
-
Cellulose nanofibers
- DS:
-
Degree of substitution
- ECF:
-
Elemental chlorine-free
- LCNFS:
-
Lignocellulosic nanofibers
- MFC:
-
Microfibrillated cellulose
- ONP:
-
Old newsprint
- OCC:
-
Old corrugated container
- P1:
-
Pulp from the exit of the thickener
- P2:
-
Pulp from the exit of the heightbox
- RCT:
-
Ring crush test
- RH:
-
Relative humidity
- SCT:
-
Short-spam compression test
- Tear I:
-
Tear Index
- TI:
-
Tensile Index
- ZP:
-
ξ-Potential
References
Afra E, Yousefi H, Hadilam MM, Nishino T (2013) Comparative effect of mechanical beating and nanofibrillation of cellulose on paper properties made from bagasse and softwood pulps. Carbohydr Polym 97:725–730. https://doi.org/10.1016/j.carbpol.2013.05.032
Ahola S, Salmi J, Johansson L-S et al (2008) Model films from native cellulose nanofibrils. Preparation, swelling, and surface interactions. Biomacromolecules 9:1273–1282. https://doi.org/10.1021/bm701317k
Ankerfors M (2015) Microfibrillated cellulose: Energy-efficient preparation techniques and applications in paper. KTH Royal Institute of Technology, School of Chemical Science and Engineering
Balea A, Blanco Á, Monte MC, et al (2016) Effect of bleached eucalyptus and pine cellulose nanofibers on the physico-mechanical properties of cartonboard. BioResources 11:8123–8138. https://doi.org/10.15376/biores.11.4.8123-8138
Balea A, Merayo N, Seara M et al (2016b) Effect of NFC from organosolv corn stalk pulp on retention and drainage during papermaking. Cellul Chem Technol 50:377–383
Balea A, Merayo N, La FED et al (2017) Assessing the influence of refining, bleaching and TEMPO-mediated oxidation on the production of more sustainable cellulose nanofibers and their application as paper additives. Ind Crop Prod 97:374–387. https://doi.org/10.1016/j.indcrop.2016.12.050
Balea A, Sanchez-Salvador JL, Monte MC et al (2019) In situ production and application of cellulose nanofibers to improve recycled paper production. Molecules 24:1800 (1–13). https://doi.org/10.3390/molecules24091800
Boufi S, González I, Delgado-Aguilar M et al (2016) Nanofibrillated cellulose as an additive in papermaking process: a review. Carbohydr Polym 154:151–166. https://doi.org/10.1016/j.carbpol.2016.07.117
Bras J, Saini S (2017) Nanocellulose in functional packaging. In: Jawaid M, Boufi S, Abdul Khalil HPS (eds) Cellulose-reinforced nanofibre composites: production, properties and applications. Elsevier, Amsterdam, pp 175–213
Brodin FW, Gregersen ØW, Syverud K (2014) Cellulose nanofibrils: Challenges and possibilities as a paper additive or coating material – A review. Nord Pulp Pap Res J 29:156–166. https://doi.org/10.3183/npprj-2014-29-01-p156-166
Carrasco F, Mutjé P, Pélach MA (1996) Refining of bleached cellulosic pulps: characterization by application of the colloidal titration technique. Wood Sci Technol 30:227–236. https://doi.org/10.1007/BF00229345
Caufield D, Gunderson D (1988) Paper testing and strength characteristics. In: TAPPI proceedings of the 1988 paper preservation symposium, pp 31–40
Chinga-Carrasco G (2013) Optical methods for the quantification of the fibrillation degree of bleached MFC materials. Micron 48:42–48. https://doi.org/10.1016/j.micron.2013.02.005
Chinga-carrasco G, Syverud K (2014) Pretreatment-dependent surface chemistry of wood nanocellulose for pH-sensitive hydrogels. J Biomater Appl 29:423–432. https://doi.org/10.1177/0885328214531511
Delgado-Aguilar M, Recas E, Puig J et al (2015) Aplicación de celulosa nanofibrilada, en masa y superficie, a la pulpa mecánica de muela de piedra: una sólida alternativa al tratamiento clásico de refinado. Maderas Cienc y Tecnol 17:1–21. https://doi.org/10.4067/S0718-221X2015005000028
Djafari Petroudy SR, Ghasemian A, Resalati H et al (2015) The effect of xylan on the fibrillation efficiency of DED bleached soda bagasse pulp and on nanopaper characteristics. Cellulose 22:385–395. https://doi.org/10.1007/s10570-014-0504-z
Ehman N, Tarrés Q, Delgado-Aguilar M et al (2016) From pine sawdust to cellulose nanofibers. Cellul Chem Technol 50:361–367
Ehman NV, Lourenço A, McDonagh B et al (2020) Influence of initial chemical composition and characteristics of pulps on the production and properties of lignocellulosic nanofibers. Int J Biol Macromol 143:453–461. https://doi.org/10.1016/j.ijbiomac.2019.10.165
Eriksen Ø, Syverud K, Gregersen Ø (2008) The use of microfibrillated cellulose produced from kraft pulp as strength enhancer in TMP paper. Nord Pulp Pap 23:299–304. https://doi.org/10.3183/npprj-2008-23-03-p299-304
Espinosa E, Tarrés Q, Delgado-Aguilar M et al (2015) Suitability of wheat straw semichemical pulp for the fabrication of lignocellulosic nanofibres and their application to papermaking slurries. Cellulose 23:837–852. https://doi.org/10.1007/s10570-015-0807-8
Ferrer A, Quintana E, Filpponen I et al (2012) Effect of residual lignin and heteropolysaccharides in nanofibrillar cellulose and nanopaper from wood fibers. Cellulose 19:2179–2193. https://doi.org/10.1007/s10570-012-9788-z
Gamelas J, Pedrosa J, Lourenço A et al (2015) On the morphology of cellulose nanofibrils obtained by TEMPO-mediated oxidation and mechanical treatment. Micron 72:28–33. https://doi.org/10.1016/j.micron.2015.02.003
Gharehkhani S, Sadeghinezhad E, Kazi SN et al (2015) Basic effects of pulp refining on fiber properties—a review. Carbohydr Polym 115:785–803. https://doi.org/10.1016/j.carbpol.2014.08.047
González I, Boufi S, Pèlach MA, et al (2012) Nanofibrillated cellulose as paper additive in eucalyptus pulp. BioResources 7:5167–5180. https://doi.org/10.15376/biores.7.4.5167-5180
Imlauer C, Kruyeniski J, Area MC, Felissia F (2014) Fraccionamiento a la Soda-AQ de aserrín de pino para la biorefinería forestal. In: VIII CIADICYP The VIIIIberoAmerican Congress on Pulp and Paper Research. Medellín, pp 26–28
Imlauer CM, Ehman NV, Area MC, Felissia F (2015) Soda/ethanol–oxygen delignification of pine sawdust for a biorefinery. 3er Congreso Iberoamericano sobre Biorrefinerías (CIAB), 4to Congreso Latinoamericano sobre Biorrefinerías, y 2do Simposio Internacional sobre Materiales Lignocelulósicos. Concepción, Chile
Janardhnan S, Sain M (2007) Isolation of cellulose microfibrils–an enzymatic approach. Bioresources 1(2):176–188
Ju SM, Gurnagul N, Shallhorn P (2005) A comparison of the effects of papermaking variables on ring crush strength and short-span compressee strength of paperboard 3. In: PAPTAC 91st annual meeting, pp B153–B166
Kajanto I, Kosonen M (2012) The potential use of micro-and nanofibrillated cellulose as a reinforcing element in paper. J Sci Technol For Prod Process 2:42–48
Lavoine N, Desloges I (2014) Impact of different coating processes of microfibrillated cellulose on the mechanical and barrier properties of paper. J Mater Sci. https://doi.org/10.1007/s10853-013-7995-0
Mocchiutti P, Galván M, Peresin S et al (2014) Complexes of xylan and synthetic polyelectrolytes. Characterization and adsorption onto high quality unbleached fibers. Carbohydr Polym 116:131–139. https://doi.org/10.1016/j.carbpol.2014.04.081
Przybysz Buzała K, Kalinowska H, Borkowski J, Przybysz P (2018) Effect of xylanases on refining process and kraft pulp properties. Cellulose 25:1319–1328. https://doi.org/10.1007/s10570-017-1609-y
Rojo E, Peresin MS, Sampson WW et al (2015) Comprehensive elucidation of the effect of residual lignin on the physical, barrier, mechanical and surface properties of nanocellulose films. Green Chem 17:1853–1866. https://doi.org/10.1039/c4gc02398f
Saito T, Isogai A (2004) TEMPO-mediated oxidation of native cellulose. The effect of oxidation conditions on chemical and crystal structures of the water-insoluble fractions. Biomacromol 5:1983–1989. https://doi.org/10.1021/bm0497769
Saito T, Kimura S, Nishiyama Y, Isogai A (2007) Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose. Biomacromol 8:2485–2491. https://doi.org/10.1021/bm0703970
Taipale T, Ruokolainen J, Nyka A, Laine J (2010) Effect of microfibrillated cellulose and fines on the drainage of kraft pulp suspension and paper strength. Cellulose. https://doi.org/10.1007/s10570-010-9431-9
Tanpichai S, Witayakran S, Srimarut Y et al (2019) Porosity, density and mechanical properties of the paper of steam exploded bamboo microfibers controlled by nanofibrillated cellulose. J Mater Res Technol 8:3612–3622. https://doi.org/10.1016/j.jmrt.2019.05.024
Tarres Q, Area MC, Vallejos M et al (2017) Key role of anionic trash catching system on the efficiency of lignocellulose nanofibers in industrial recycled slurries. Cellulose. https://doi.org/10.1007/s10570-017-1589-y
Tozluoglu A, Poyraz B (2016) Effects of cellulose micro/nanofibers as paper additives in kraft and kraft-NaBH 4 pulps. Nord Pulp Pap Res J 31:1–12. https://doi.org/10.3183/npprj-2016-31-04-p561-572
Vallejos M, Felissia F, Area MC et al (2016) Nanofibrillated cellulose (CNF) from eucalyptus sawdust as a dry strength agent of unrefined eucalyptus handsheets. Carbohydr Polym 139:99–105. https://doi.org/10.1016/j.carbpol.2015.12.004
Acknowledgments
The authors acknowledge the National Scientific and Technical Research Council (CONICET, Argentina), the National University of Misiones (Argentina), and CYTED-NANOCELIA network (Grant No. P316RT0095).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Ehman, N.V., Felissia, F.E., Tarrés, Q. et al. Effect of nanofiber addition on the physical–mechanical properties of chemimechanical pulp handsheets for packaging. Cellulose 27, 10811–10823 (2020). https://doi.org/10.1007/s10570-020-03207-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-020-03207-5