SpringerLink
Log in

Development of a Prototype Positive Displacement Piston Hybrid Power Machine with Two Suction Valves and a Facility for Its Testing

  • COMPRESSORS, PUMPS, AND PIPELINE FITTINGS
  • Published:
Chemical and Petroleum Engineering Aims and scope

    We’re sorry, something doesn't seem to be working properly.

    Please try refreshing the page. If that doesn't work, please contact support so we can address the problem.

The paper presents a classification of positive displacement piston hybrid power machine (PDPHPM) designs. For the jacket cooling of a piston compressor, it is advisable to use the compressor piston to provide suction for both gas and fluid phases. The reverse flow of the fluid can be partially effected using the compressed gas. A schematic diagram of a PDPHPM protected by a patent of the Russian Federation is presented. Based on the developed scheme, a constructive development of a new cylinder- piston group was carried out. A prototype of the machine and an experimental facility for its testing, equipped with the necessary control and measuring equipment, were constructed. The method of measuring the main thermodynamic and flow rate parameters during the machine operation is considered.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
EUR 32.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or Ebook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price includes VAT (United Kingdom)

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
Fig. 5.
Fig. 6.
Fig. 7.

Similar content being viewed by others

References

  1. P. I. Plastinin, Piston Compressors, Vol. 1. Theory and Calculation [in Russian], Textbook, ColosS, Moscow (2006).

  2. B. S. Photin, I. B. Pirumov, I. K. Prilutskii, and P. I. Plastinin, Piston compressors [in Russian], Textbook, Ed. B. S. Photin, Mashinostroenie, Leningrad (1987).

  3. V. E. Shcherba, Operation Processes of Positive Displacement Compressors [in Russian], Nauka, Moscow (2008).

  4. V. E. Shcherba, E. A. Pavlyuchenko, E. Yu. Nosov, and I. Yu. Bulgakova, “Approximation of the compression process to isothermal in a reciprocating compressor with a fluid piston,” Applied Thermal Engineering, 207, 118151, 1–12 (2022).

    Google Scholar 

  5. V. E. Shcherba, V. V. Shalay, E. Yu. Nosov, et al., “Development and research of crosshead-free piston hybrid power machine,” Machines, 9, No. 32, 1–38 (2021).

    Google Scholar 

  6. V. E. Shcherba, E. A. Pavlyuchenko, E. Yu. Nosov, and I. Yu. Bulgakova, “Analysis of the influence of thermophysical properties of a droplet fluid on the work processes of a two-stage piston hybrid power machine,” Machines, 10 (2), 70, 1–23 (2022).

  7. V. E. Shcherba, A. P. Bolshtyanskii, V. V. Shalay, and A. V. Khodoreva, Pump Compressors. Operation Processes and Design Fundamentals [in Russian], Mashinostroenie, Moscow (2013).

  8. A. Yu. Kondyurin, V. E. Shcherba, V. V. Shalai, et al., “Calculation of fluid flow through pump-compressor slot seal made in the form of hydrodiode,” Chem. and Petrol. Eng., 52, No. 3-4, 267–273 (2016).

    Article  CAS  Google Scholar 

  9. V. E. Shcherba, V. V. Shalai, A. S. Tegzhanov, et al., “Generalized comparative analysis of crosshead-free and crosshead schemes of piston hybrid power machines,” J. Mech. Sci. and Techn., No. 34 (12), 5093–5107 (2020).

  10. I. E. Lobov and V. E. Shcherba, “Development and calculation of a fluid cooling system for a piston compressor using pressure fluctuations during gas discharge,” Chem. and Petrol. Eng., 52, No. 3-4, 251–259 (2016).

    Article  Google Scholar 

  11. V. E. Shcherba, D. A. Kuzeeva, and E. Yu. Nosov, “Mathematical modeling of working processes in a piston pump-compressor with a gas volume at suction,” Vestn. Mashinostroenieya, No. 4, 3–8 (2016).

    Google Scholar 

  12. V. E. Shcherba, A. Khait, E. A. Pavlyuchenko, and I. Yu. Bulgakova, “Development and research of a promising pumpless fluid cooling system for reciprocating compressors,” Energies, 16, 1191 (2023).

    Article  Google Scholar 

  13. A. S. Tegzhanov, V. E. Shcherba, and A. P. Bolshtyanskii, Pat. 2784267 RF, IPC F 04 B 39/04 (2006.01). Piston Compressor with Independent Fluid Jacket Cooling [in Russian], No. 2022120867, Appl. 07/29/2022, Publ. 11/23/2022.

  14. P. P. Kremlevskii, Flowmeters and Meters of the Amount of Substances: Reference Book [in Russian], Book 1, Politekhnika, St. Petersburg (2002).

  15. E. L. Kosarev, Methods of Experimental Data Processing [in Russian], Textbook, MFTI, Moscow (2003).

Download references

Author information

Authors and Affiliations

  1. Omsk State Technical University, Omsk, Russia

    V. E. Shcherba, A. Kh.-S. Tegzhanov & G. I. Ekimov

Authors
  1. V. E. Shcherba
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. A. Kh.-S. Tegzhanov
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. G. I. Ekimov
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to V. E. Shcherba.

Additional information

Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, Vol. 59, No. 2, pp. 29−33, February, 2023.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Shcherba, V.E., Tegzhanov, A.KS. & Ekimov, G.I. Development of a Prototype Positive Displacement Piston Hybrid Power Machine with Two Suction Valves and a Facility for Its Testing. Chem Petrol Eng 59, 144–152 (2023). https://doi.org/10.1007/s10556-023-01220-6

Download citation

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10556-023-01220-6

Keywords

Search

Navigation