Abstract
The repair and reconstruction of large bone defects after bone tumor resection is still a great clinical challenge. At present, orthopedic implant reconstruction is the mainstream treatment for repairing bone defects. However, according to clinical feedback, local tumor recurrence and nonunion of bone graft are common reasons leading to the failure of bone defect repair and reconstruction after bone tumor resection, which seriously threaten the physical and mental health of patients. On this basis, here the self-developed low modulus Ti-12Mo-10Zr alloy (TMZ) was chosen as substrate material. To improve its biological activity and osteointegration, calcium, oxygen, and phosphorus co-doped microporous coating was prepared on TMZ alloy by microarc oxidation (MAO). Then, black phosphorus (BP) nanosheets were incorporated onto MAO treated TMZ alloy to obtain multifunctional composites. The obtained BP-MAO-TMZ implant exhibited excellent photothermal effects and effective ablation of osteosarcoma cancer cells under the irradiation of 808 nm near infrared laser, while no photothermal or therapeutic effects were observed for TMZ alloy. Meanwhile, the structure/component bionic coating obtained after MAO treatment as well as the P-driven in situ biomineralization performance after incorporation of BP nanosheets endowed BP-MAO-TMZ implant with synergistic promoting effect on MC3T3-E1 osteoblasts’ activity, proliferation and differentiation ability. This study is expected to provide effective clinical solutions for problems of difficult bone regeneration and tumor recurrence after tumor resection in patients with bone tumors and to solve a series of medical problems such as poor prognosis and poor postoperative quality of patients life with malignant bone tumors.
Similar content being viewed by others
References
Akimoto T, Ueno T, Tsutsumi Y et al (2018) Evaluation of corrosion resistance of implant-use Ti-Zr binary alloys with a range of compositions. J Biomed Mater Res B 106(1):73–79
Bhardwaj T, Shukla M, Prasad NK et al (2020) Direct laser deposition-additive manufacturing of Ti-15Mo alloy: effect of build orientation induced surface topography on corrosion and bioactivity. Met Mater Int 26(7):1015–1029
Cai BY, Tan PJ, Jiang N et al (2020) Bioinspired fabrication of calcium-doped TiP coating with nanofibrous microstructure to accelerate osseointegration. Bioconjug Chem 31(6):1641–1650
Cai BY, Huang LZ, Wang JC et al (2021) 3D printed multifunctional Ti6Al4V-based hybrid scaffold for the management of osteosarcoma. Bioconjug Chem 32(10):2184–2194
Cai BY, Lei K, Sun CC et al (2022) Surface modification of new innocuous Ti-Mo-Zr based alloys for biomedical applications. Biometals 35(6):1271–1280
Chen LY, Cui YW, Zhang LC (2020) Recent development in beta titanium alloys for biomedical applications. Metals 10(9):1139–1167
Dong SJ, Chen Y, Yu LD et al (2020) Magnetic hyperthermia-synergistic H2O2 self-sufficient catalytic suppression of osteosarcoma with enhanced bone-regeneration bioactivity by 3D-printing composite scaffolds. Adv Funct Mater 30(4):1907071
Guo ZJ, Jiang N, Moore J et al (2019) Nanoscale hybrid coating enables multi-functional tissue scaffold for potential multi-model therapeutic applications. ACS Appl Mater Interfaces 11(30):27269–27278
He MM, Zhu C, Xu H et al (2020) Conducting PEEK nanocomposites with electrophoretically deposited bioactive coating for bone tissue regeneration and multi-modal therapeutic applications. ACS Appl Mater Interfaces 12:56924–56934
Huang JC, He BZ, Zhang ZJ et al (2020) Aggregation-induced emission luminogens married to 2D black phosphorus nanosheets for highly efficient multimodal theranostics. Adv Mater 32:2003382
Huang LZ, Cai BY, Huang Y et al (2021) Comparative study on 3D printed Ti6Al4V scaffolds with surface modification using hydrothermal treatment and microarc oxidation to enhance osteogenic activity. ACS Omega 6:1465–1476
Jiang N, Guo ZJ, Sun D et al (2018) Promoting osseointegration of Ti implants through micro/nanoscaled hierarchical Ti phosphate/Ti oxide hybrid coating. ACS Nano 12:7883–7891
Jung HS, Verwilst P, Sharma A et al (2018) Organic molecule-based photothermal agents: an expanding photothermal therapy universe. Chem Soc Rev 47(7):2280–2297
Kirui DK, Rey DA, Batt CA (2010) Gold hybrid nanoparticles for targeted phototherapy and cancer imaging. Nanotechnology 21(10):105105
Lee SY, Shieh MJ (2020) Platinum (II) drug-loaden gold nanoshells for chemo-photothermal therapy in colorectal cancer. ACS Appl Mater Interfaces 12(4):4254–4264
Liu F, Zhang YT, Ma XR et al (2019) Effect of the titanium surface immobilized by arginyl-glycyl-aspartate peptide self-assembling multilayers on mouse osteoblast-like cell MC3T3-E1. J Int Stomatol 046(2):203–208
Liu H, Yang JJ, Zhao XY et al (2019) Microstructure, mechanical properties and corrosion behaviors of biomedical Ti-Zr-Mo-xMn alloys for dental application. Corros Sci 161:108195
Luo MM, Fan TJ, Zhou Y et al (2019) 2D black phosphorus-based biomedical application. Adv Funct Mater 29:1808306
Lv RC, Yang D, Yang PP et al (2018) Integration of upconversion nanoparticles and ultrathin black phosphorus for efficient photodynamic theranostics under 808 nm near-infrared light irradiation. Chem Mater 28(13):4724–4734
Ma HS, Jiang C, Zhai D et al (2016) A bifunctional biomaterial with photothermal effect for tumor therapy and bone regeneration. Adv Funct Mater 26(8):1197–1208
Ma HS, Feng C, Chang J et al (2018) 3D-printed bioceramic scaffolds: from bone tissue engineering to tumor therapy. Acta Biomater 79:37–59
Niinomi M, Nakai M, Hieda J (2012) Development of new metallic alloys for biomedical applications. Acta Biomater 8(11):3888–3903
Pabka B, Mlla B, Drncb C et al (2020) Thermomechanical treatments influence on the phase composition, microstructure, and selected mechanical properties of Ti-20Zr-Mo alloys system for biomedical applications. J Alloy Compd 812(5):152108–152108
Predoi D, Ciobanu CS, Iconaru SL et al (2022) Impact of gamma irradiation on the properties of magnesium-doped hydroxyapatite in chitosan matrix. Materials 15:5372–5392
Predoi D, Ciobanu CS, Iconaru SL et al (2022) Physicochemical and biological evaluation of chitosan-coated magnesium-doped hydroxyapatite composite layers obtained by vacuum deposition. Coatings 12:702–721
Schliephake H, Scharnweber D, Dard M et al (2002) Effect of RGD peptide coating of titanium implants on periimplant bone formation in the alveolar crest. Clin Oral Implant Res 13(3):312–319
Shao JD, **e HH, Huang H et al (2016) Biodegradable black phosphorus-based nanospheres for in vivo photothermal cancer therapy. Nat Commun 30(7):12967
Sun ZB, **e HN, Tang SY et al (2015) Ultrasmall black phosphorus quantum dots: synthesis and use as photothermal agents. Angew Chem 127(39):11688–11692
Sun DY, Mclaughlan J, Zhang L et al (2019) Atmospheric pressure plasma synthesized gold nanoparticle/carbon nanotube hybrids for photo-thermal conversion. Langmuir 35(13):4577–4588
Xu C, Chen F, Valdovinos HF et al (2018) Bacteria-like mesoporous silica-coated gold nanorods for positron emission tomography and photoacoustic imaging-guided chemo-photothermal combined therapy. Biomaterials 165:56–65
**u P, Jia ZJ, Lv J et al (2016) Tailored surface treatment of 3D printed porous Ti6Al4V by microarc oxidation for enhanced osseointegration via optimized bone in-growth patterns and interlocked bone/implant interface. ACS Appl Mater Interfaces 8:17964–17975
Yasaei P, Kumar B, Foroozan T et al (2015) High-quality black phosphorus atomic layers by liquid-phase exfoliation. Adv Mater 27(11):1887–1892
Yang BW, Yin JH, Chen Y et al (2018) 2D-balck phosphorus-reinforced 3D-printed scaffolds: a stepwise countermeasure for osteosarcoma. Adv Mater 30:1–12
Zhang B, Kwok CT, Cheng FT et al (2011) Fabrication of nano-structured HA/CNT coatings on Ti6Al4V by electrophoretic deposition for biomedical applications. J Nanosci Nanotechnol 11(12):10740–10745
Zhang Y, Sheng Y (2015) A study on the quality of life and influencing factors of children with malignant bone tumor. Chin J Nurs 50(4):423–427
Zhang X, Lv Y, Fu S et al (2020) Synthesis, microstructure, anti-corrosion property and biological performances of Mn-incorporated Ca-P/TiO2 composite coating fabricated via micro-arc oxidation. Mater Sci Eng C 117:111321
Zoran M, Ljubica H, Biljana TM et al (2011) In vitro comparison of the photothermal anticancer activity of graphene nanoparticles and carbon nanotubes. Biomaterials 32(4):1121–1129
Acknowledgements
This work was supported by the Key Research and Development Program of Henan Province (222102310441) and the Henan Excellent Youth Science Foundation project (NO. 212300410039).
Author information
Authors and Affiliations
Contributions
BC and LH1 contributed equally to this work. Briefly, BC conceived ideas of this work and performed all the experimental work related to preparation and characterization of the material. LH carried out all the biological work. All authors participated in the data analysis and results discussion as well as the writing and revising of the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Bianyun Cai and Leizhen Huang contributed equally to this work.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Cai, B., Huang, L., Zhou, X. et al. Black phosphorus-incorporated novel Ti-12Mo-10Zr implant for multimodal treatment of osteosarcoma. Biometals 37, 131–142 (2024). https://doi.org/10.1007/s10534-023-00533-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10534-023-00533-6