Abstract
The signal estimate and statistical uncertainty in the measurements of Brillouin shift by the edge technique are analyzed in detail. A signal to noise parameter factor is introduced and is used to discuss the statistical uncertainty in the measurements. The effect of signal averaging and the effect due to background noise are analyzed. Some helpful conclusions are predicted.
Similar content being viewed by others
References
J.A. Gelbwachs: IEEE J. Quantum Electron. QE-24, 1266 (1988)
G. Yang, R.I. Billmer, P.R. Herczfeld, V.M. Contarino: Opt. Lett. 22, 414 (1997)
C.L. Korb, B.M. Gentry, C.Y. Weng: Appl. Opt. 31, 4202 (1992)
C.L. Korb, B.M. Gentry, X. Li: Proc. SPIE Vol. 2310, 206 (1994)
J.S. Friedman, C.A. Tepley, P.A. Castleberg, H. Roe: Opt. Lett. 22, 1648 (1997)
P. Piironen, E.W. Eloranta: Opt. Lett. 19, 234 (1994)
J.N. Forkey, W.R. Lempert, R.B. Miles: Appl. Opt. 36, 6729 (1997)
R. Dai, W. Gong, J. Xu, X. Ren, D. Liu: Appl. Phys. B (in press). DOI 10.1007/s00340-004-1540-4
Author information
Authors and Affiliations
Corresponding author
Additional information
PACS
42.68.Wt; 42.79.Qx; 78.35.+c
Rights and permissions
About this article
Cite this article
Xu, J., Dai, R., Gong, W. et al. Analyzing statistical errors for measurements of Brillouin scattering by the edge technique. Appl. Phys. B 79, 131–134 (2004). https://doi.org/10.1007/s00340-004-1534-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00340-004-1534-2