Abstract
Nichrome has a small resistance temperature coefficient, high resistance accuracy and resistivity, good thermal stability and chemical stability, which has great potential for high temperature stealth applications, yet not been mentioned in previous studies. In this paper, a microwave-absorbing structure based on Salisbury screen produced by nichrome coated quartz fiber fabric (NFF) and pristine quartz fiber fabric (PFF) is proposed. A direct current (DC) magnetron sputtering technique is used to form the nichrome coating onto the quartz fiber fabric. The morphology, element, and phase identification of nichrome coated quartz fiber fabrics were examined by SEM, EDS, and XRD, respectively. The reflectivity of the proposed structure of nichrome coated quartz fiber fabrics sputtered at one side or both sides is obviously different, and relative to the sputtering time and the number of pristine quartz fiber fabric tiers. The so-made microwave-absorbing structure is thin and lightweight, and exhibits good absorption performance in X and Ku frequency band, with wide bandwidth below − 10 dB from 8.5 to 15.5 GHz, and reached a lowest reflectivity of − 53 dB at 11.48 GHz.
Similar content being viewed by others
References
H. Tian, H.-T. Liu, H.-F. Cheng, Compos. Sci. Technol. 90, 202–208 (2014)
H. Wang, D. Zhu, W. Zhou, F. Luo, J. Alloy. Compd. 648, 313–319 (2015)
W. Zhou, P. **ao, Y. Li, Appl. Surf. Sci. 258, 8455–8459 (2012)
W. Hong, P. **ao, Z. Li, H. Luo, Carbon 79, 538–543 (2014)
W. Zhou, P. **ao, Y. Li, L. Zhou, Ceram. Int. 39, 6569–6576 (2013)
H. Luo, P. **ao, L. Huang, W. Hong, Ceram. Int. 40, 8253–8259 (2014)
L. Zhang, C. Shi, K.Y. Rhee, N. Zhao, Compos. A Appl. Sci. Manuf. 43, 2241–2248 (2012)
Y. Qing, W. Zhou, S. Huang, Z. Huang, F. Luo, D. Zhu, Compos. Sci. Technol. 89, 10–14 (2013)
H. Wang, D. Zhu, W. Zhou, F. Luo, Chem. Phys. Lett. 633, 223–228 (2015)
C. Gong, J. Zhang, C. Yan, X. Cheng, J. Zhang, L. Yu, Z. **, Z. Zhang, J. Mater. Chem. 22, 3370 (2012)
L. Wang, X. Yu, X. Li, J. Zhang, M. Wang, R. Che, Carbon 155, 298–308 (2019)
H. Kou, Y. Zhu, M. Chen, Y. Zeng, Y. Pan, J. Guo, Int. J. Appl. Ceram. Technol. 10, 245–250 (2013)
X. Yuan, L. Cheng, L. Zhang, Ceram. Int. 40, 15391–15397 (2014)
B. Wang, H. Li, L. Xu, J. Chen, G. He, RSC Adv. 7, 12126–12132 (2017)
W. Duan, X. Yin, Q. Li, L. Schlier, P. Greil, N. Travitzky, J. Eur. Ceram. Soc. 36, 3681–3689 (2016)
F. Wan, F. Luo, Y. Zhou, W. Zhou, D. Zhu, Surf. Coat. Technol. 264, 9–16 (2015)
Y. Shi, F. Luo, D. Ding, F. Wan, W. Zhou, D. Zhu, Int. J. Appl. Ceram. Technol. 13, 17–22 (2016)
L. Kong, X. Yin, M. Han, L. Zhang, L. Cheng, Ceram. Int. 41, 4906–4915 (2015)
Q. Zhang, Y. Gou, H. Wang, K. Jian, Y. Wang, Mater. Des. 120, 90–98 (2017)
G. Wu, Y. Cheng, Q. **e, Z. Jia, F. **ang, H. Wu, Mater. Lett. 144, 157–160 (2015)
X. Ting, Y. Cao, N.A. Oyler, M. James, L. Liu, X. Chen, Acs Appl. Mater. Interfaces 7, 10407–10413 (2015)
D. Zhu, F. Luo, L. **ong, W. Zhou, Mater. Lett. 61, 1760–1762 (2007)
Y. Li, H. Cheng, N. Wang, S. Zhou, D. **e, T. Li, NANO 13, 1850125 (2018)
N. Yang, Z.X. Luo, G.R. Zhu, S.C. Chen, X.L. Wang, G. Wu, Y.Z. Wang, ACS Appl. Mater. Interfaces 11, 35987–35998 (2019)
Y. Wang, P. **ao, W. Zhou, H. Luo, Z. Li, W. Chen, Y. Li, Ceram. Int. 44, 3606–3613 (2018)
L. Long, W. Zhou, P. **ao, Y. Li, J. Mater. Sci. 30, 3359–3364 (2019)
X. Yuan, L. Cheng, S. Guo, L. Zhang, Ceram. Int. 43, 282–288 (2017)
M. Bakır, M. Karaaslan, F. Dincer, K. Delihacioglu, C. Sabah, J. Mater. Sci. 27, 12091–12099 (2016)
E. Unal, F. Dincer, E. Tetik, M. Karaaslan, M. Bakir, C. Sabah, J. Mater. Sci. 26, 9735–9740 (2015)
H. Wang, D. Zhu, W. Zhou, F. Luo, J. Magn. Magn. Mater. 375, 111–116 (2015)
X. Yuan, L. Cheng, Y. Zhang, S. Guo, L. Zhang, Mater. Des. 92, 563–570 (2016)
Y.-W. Nam, J.-H. Choi, W.-J. Lee, C.-G. Kim, Compos. Struct. 160, 1171–1177 (2017)
Y. Shen, J. Zhang, Y. Pang, Y. Meng, J. Wang, H. Ma, S. Qu, J. Phys. D Appl. Phys. 51, 315103 (2018)
S. Petrovic, N. Bundaleski, M. Radovic, Z. Ristic, G. Gligoric, D. Perusko, S. Zec, Sci. Sinter. 38, 155–160 (2006)
M. Sumita, K. Sakata, Y. Hayakawa, S. Asai, M. Tanemura, Colloid Polym. Sci. 270, 134–139 (1992)
Acknowledgements
The authors are grateful for the financial support from Grant 2015TP1007 under the Science and Technology Plan Project of Hunan Province.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Wang, X., Wang, H., Huang, Q. et al. Magnetron sputtering nichrome on fiber fabric to construct microwave-absorbing structure. Appl. Phys. A 126, 863 (2020). https://doi.org/10.1007/s00339-020-04037-9
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s00339-020-04037-9