Abstract
For reliability analysis, there may be several potential distributions for a random variable due to limited samples available. For the same reason, a distribution may not be available. Simply assuming a normal distribution may result in a large error for the reliability prediction. Moment-based methods use only moments of random variables for reliability analysis and can effectively address the problem of multiple distributions or lack of distributions. The existing moment-based methods, however, may produce large errors or may result in instability in the analysis process. This study extends the high-moment method for higher accuracy of the reliability prediction by including the parameters ignored by the existing high-moment method. The proposed method derives the reliability index from the first four moments of random input variables based on the statistical properties of the standard normal random variable. Compared with the existing method, the proposed method is more accurate and stable for problems for which the distributions of input random variables are unknown. Numerical examples show the improved accuracy from the proposed method.
Similar content being viewed by others
References
Benaroya H, Rehak M (1988) Finite element methods in probabilistic structural analysis: a selective review. Appl Mech Rev 41(5):201–213
Birnbaum ZW (1956) On a use of the Mann-Whitney statistic. In: Proceedings of the Third Berkeley Symposium on Mathematical Statistics and Probability, vol 1. University of Califomia Pres, Berkeley, pp 13–17
Bucher CG, Bourgund U (1990) A fast and efficient response surface approach for structural reliability problems. Struct Saf 7(1):57–66
Das PK, Zheng Y (2000) Cumulative formation of response surface and its use in reliability analysis. Probab Eng Mech 15(4):309–315
Der Kiureghian A, De Stefano M (1991) Efficient algorithm for second-order reliability analysis. ASCE J Eng Mech 117(1):2904–2923
Der Kiureghian A, Ke J-B (1988) The stochastic finite element method in structural reliability. Prob Eng Mech 3(2):83–91
Der Kiureghian A, Liu PL (1986) Structural reliability under incomplete probability information. ASCE J Eng Mech 112(1):85–104
Du X (2010) System reliability analysis with saddlepoint approximation. Struct Multidiscip Optim 42(2):193–208
Du X, Hu Z (2012) First order reliability method with truncated random variables. J Mech Des 134(9):091005-091005-9
Faravelli L (1989) Response surface approach for reliability analysis. ASCE J Eng Mech 115(12):2763–2781
Freudenthal AM (1947) The safety of structures. ASCE Transactions 112(1):125–129
Ghanem RG, Spanos PD (1991) Spectral stochastic finite-element equationtion for reliability analysis. J Eng Mech ASCE 117(10):2351–2372
Ghanem R, Spanos PD (2003) Stochastic finite elements: a spectral approach. Dover Publications, New York
Gong JX, Yi P (2011) A robust iterative algorithm for structural reliability analysis. Struct Multidiscip Optim 43(4):519
Gorman MR (1980) Reliability of structural system. Case Western Reserve University, Cleveland, pp 320–332
Guan XL, Melchers RE (2001) Effect of response surface parameter variation on structural reliability estimates. Struct Saf 23(4):429–444
Guo SX, Lu ZZ (2015) A non-probabilistic robust reliability method for analysis and design optimization of structures with uncertain-but-bounded parameters. Appl Math Model 39(7):1985–2002
Haldar A, Mahadevan S (2000) Reliability assessment using stochastic finite element analysis. Wiley, New York
Hasofer AM, Lind NC (1974) Exact and invariant second-moment code format. ASCE J Eng Mech Div 100(EM1):111–121
Hohenbichler M, Rackwitz R (1981) Non-normal dependent vectors in structural safety. ASCE J Eng Mech Div 107(6):1227–1249
Hohenbichler M, Rackwitz R (1983) First-order concepts in system reliability. Struct Saf 1(3):177–188
Hong HP (1998) Point-estimate moment-based reliability analysis. Civ Eng Syst 13(4):281–294
Huang X, Liu Y, Zhang Y et al (2016) Reliability analysis of structures using stochastic response surface method and saddlepoint approximation. Struct Multidiscip Optim. doi:10.1007/s00158-016-1617-9
Hurtado JE (2004) Structural reliability: statistical learning perspectives. Springer, Berlin
Hurtado JE, Alvarez DA (2003) Classification approach for reliability analysis with stochastic finite-element modeling. J Struct Eng ASCE 129(8):1141–1149
Ibrahim RA (1987) Structural dynamics with parameter uncertainties. Appl Mech Rev 40(3):309–328
Kang W, Lee YJ, Song J, Gencturk B (2012) Further development of matrix-based system reliability method and applications to structural systems. Struct Infrastruct Eng 8(5):441–457
Kim SH, Na SW (1997) Response surface method using vector projected sampling points. Struct Saf 19(1):3–19
Melchers RE (1999) Structural reliability analysis and prediction. Wiley, Chichester
Montgomery DC (2005) Design and analysis of experimens, 6th edn. Wiley, New York
Parkinson DB (1978) First-order reliability analysis employing translation systems. Eng Struct 1(1):31–40
Rajashekhar MR, Ellingwood BR (1993) A new look at the response surface approach for reliability analysis. Struct Saf 12(3):205–220
Rosenblueth E (1981) Two-point estimates in probability. Appl Math Model 5(5):329–335
Seo HS, Kwak BM (2002) Efficient statistical tolerance analysis for general distributions using three-point informatio. Int J Prod Res 40(4):931–944
Stuart A, Ord JK (1987) Kendall’s advanced theory of statistics, vol 1. Charles Griffin & Company Ltd, London, pp 210–275
Umberto A, Koh CG (2015) First-order reliability method for structural reliability analysis in the presence of random and interval variables. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering 1(4):041006-041006-10
Vanmarcke EH (1983) Random field: analysis and synthesis. MIT Press, Cambridge
Vanmarcke E, Shinozuka M, Nakagiri S et al (1986) Random fields and stochastic finite elements. Struct Saf 3(3–4):143–166
**ao NC, Huang HZ, Wang Z et al (2011) Reliability sensitivity analysis for structural systems in interval probability form. Struct Multidiscip Optim 44(5):691
Yao W, Chen X, Huang Y, van Tooren M (2013) An enhanced unified uncertainty analysis approach based on first order reliability method with single-level optimization. Reliab Eng Syst Saf 116:28–37
Zhang T (2017) Matrix description of differential relations of moment functions in structural reliability sensitivity analysis. Appl Math Mech (English Edition) 38(1):57–72
Zhao YG, Ono T (2000) New point estimates for probability moments. J Eng Mech ASCE 126(4):433–436
Zhao YG, Ono T (2001) Moment methods for structural reliability. Struct Saf 23(1):47–75
Zheng Y, Das PK (2000) Improved response surface method and its application to stiffened plate reliability analysis. Eng Struct 22(5):544–551
Zhou JH, Nowak AS (1988) Integration equations to evaluate functions of random variables. Struct Saf 5(4):267–284
Zio E (2013) The Monte Carlo simulation method for system reliability and risk analysis. Springer, London
Acknowledgements
This research was supported by the National Natural Science Foundation Project (Grant no. 51135003) and the National Key Development Program for Fundamental Research (973 Program, Grant no. 2014CB046303).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhang, T. An improved high-moment method for reliability analysis. Struct Multidisc Optim 56, 1225–1232 (2017). https://doi.org/10.1007/s00158-017-1715-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-017-1715-3