Log in

Development of a low-cost steering system simulator

  • Published:
KSME International Journal Aims and scope Submit manuscript

Abstract

The Steering system is the most important system for a vehicle, in terms of safety and driving feel. But in many cases, experiments to improve the steering feel using a real vehicle are very difficult in the aspects of repeatability, safety and money. Repeatability in testing steering systems is very important because the steering feel for a driver varies according to the environmental conditions. In addition to that, steering tests using vehicle are so dangerous that the driver might not concentrate on the tests. In this paper, a new steering system simulator using the front part of a steering and suspension system is described. This simulator allows cheap, safe, and repeatable testing of the steering system compared with the real vehicle test.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Subscribe and save

Springer+ Basic
EUR 32.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or Ebook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  • Akinori, H. and Takamasa, S., 1995, “A Kansei Engineering Approach to a Driver/Vehicle System,”International Journal of Industrial Ergonomics, Vol. 15, pp. 25–37.

    Article  Google Scholar 

  • Kenneth, D. N, 1984, “Objective Evaluation of On-Center Handling Preformance,” 840069.

  • Kim. J. H., Park, I. K., Lee, W. S., Cho, J. H. and Choi, Y. C, 1997, “Real Time Control & Measurement for the Accuracy Improvement of the Vehicle Driving Simulator,”KSME Asia- Pacific Vibration Conference, Nov. 9–13, pp. 115–119.

  • Kurishige, M. and Kifuku, T., 2001, “Static Steering-Control System for Electric-Power Steering,”Mitshubishi Electric Advance, Vol. 94, pp. 18–20.

    Google Scholar 

  • Nakayama, T. and Suda, E., 1994, “The Present and Future of Electric Power Teering,”Int. J. of Vehicle Design, Vol. 15, Nos 3/4/5, pp. 243–254.

    Google Scholar 

  • Noh, K. H., Lee, J. S. and Ryu, J. H., 1997, “A Hardware-in-the-loop Simulation (HILS) System for Testing Electronic Power Steering Systems,” The 9th international pacific conference on automotive engineering, 971390.

  • Sueharu, N. and Shun’ichi D., etc., 1994, “Generating Method of Steering Reaction Torque on Driving Simulator,” JSAE Review 15, pp. 73–86.

    Google Scholar 

  • Sunao, C., Yutaka, S. and Kouichi, S., 1998, “Analysis of Driver’s Stress During Lane Changing Maneuver on the Driving Simulator,” AVEC ’98, pp. 493–498.

  • Tatsuya, S. and Fumihiko, B., 1996, “Study of Improving Road-Load Simulation-Power Steering Dynamic Testing System,” 960728.

  • Yasuo, S. and Toshihake, K., 1991, “Development of Electric Power Steering,” 910014.

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Yong-Goo Joe.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Lee, YY., Joe, YG., Oh, JE. et al. Development of a low-cost steering system simulator. KSME International Journal 17, 1261–1267 (2003). https://doi.org/10.1007/BF02982467

Download citation

  • Received:

  • Revised:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF02982467

Key Words

Navigation