Abstract
The anthracene coking process has been investigated in the temperature range of 400–600°C. It has been shown that intermolecular interaction of two anthracene molecules resulting in the elimination of hydrogen and the formation of a C–C bond between the middle rings begins at a temperature of 450°C. Increasing the coking temperature to 500–600°C leads to the formation of poorly crystallized graphite. In the case of pure anthracene, the formation of micron-sized spherical carbon particles occurs. The addition of carbon nanotubes to anthracene leads to the formation of the carbon “coat” covering their surface. The thickness of the carbon “coat” depends on the temperature of coking. An amorphous carbon layer observed on the surface of carbon nanotubes has a thickness of 1–2 nm in the case of coking temperature of 450°C or 10–15 nm in the case of coking at 600°C.
Similar content being viewed by others
REFERENCES
J. H. Gary, G. E. Handwerk, and M. J. Kaiser, Petroleum Refining: Technology and Economics (CRC, Boca Raton, 2007), 5th Ed.
N. T. Pokhodenko and B. I. Brondz, Production and Processing of Petroleum Coke (Khimiya, Moscow, 1986) [in Russian].
M. V. Kretinin, Mechanical and Engineering Aspects of Petroleum Coke Production (INKhP RB, Ufa, 2009) [in Russian].
I. Mochida, T. Furuno, Y. Korai, and H. Fujitsu, Oil Gas J. 84 (6), 51 (1986).
I. V. Krasnikova, I. V. Mishakov, A. A. Vedyagin, et al., Compos. Commun. 7, 65 (2018).
Q. Wang, G. Wen, J. Chen, and D. S. Su, J. Mater. Sci. Technol. 34, 2205 (2018).
B. Shen, Z. Zhu, J. Zhang, et al., Adv. Mater. 30, Article 1705844 (2018).
A. F. Krasyukov, Petroleum Coke (Khimiya, Moscow, 1966) [in Russian].
M. E. Levinter, M. I. Medvedeva, G. M. Panchenkov, et al., Khim. Tekhnol. Topl. Masel, No. 9, 31 (1966).
M. E. Levinter, M. I. Medvedeva, G. M. Panchenkov, and G. I. Agapov, Khim. Tekhnol. Topl. Masel, No. 11, 25 (1966).
A. P. Rudenko, Modern Problems of Physical Chemistry, Ed. by Ya. I. Gerasimov and P. A. Akishin (Izd. MGU, Moscow, 1968), Vol. 3, p. 263 [in Russian].
A. A. Politov, B. A. Fursenko, I. Yu. Prosanov, and V. V. Boldyrev, Int. J. Mechanochem. Mech. Alloy 1, 172 (1994).
V. M. Tapilin, N. N. Bulgakov, A. P. Chupakhin, and A. A. Politov, J. Struct. Chem. 49, 581 (2008).
V. M. Tapilin, N. N. Bulgakov, A. P. Chupakhin, et al., J. Struct. Chem. 51, 635 (2010).
A. A. Politov, B. A. Fursenko, and V. V. Boldyrev, Dokl. Phys. Chem. 371, 28 (2000).
A. A. Politov, A. P. Chupakhin, V. M. Tapilin, et al., J. Struct. Chem. 51, 1064 (2010).
O. A. Shinkarenko, R. A. Safonova, A. S. Kolesnikova, et al., Appl. Surf. Sci. 424, 177 (2017).
A. V. Golounin, E. N. Marakushina, and S. A. Khramenko, Russ. J. Appl. Chem. 81, 2137 (2008).
V. V. Chesnokov, R. A. Buyanov, and A. S. Chichkan’, Kinet. Catal. 51, 776 (2010).
R. A. Buyanov, Catalyst Coking (Nauka, Novosibirsk, 1983) [in Russian].
ACKNOWLEDGMENTS
This work was supported by the Russian Science Foundation, project no. 17-73-30032.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by S. Zatonsky
Rights and permissions
About this article
Cite this article
Chesnokov, V.V., Chichkan, A.S. & Paukshtis, E.A. Effect of Carbon Nanotube Admixture on Anthracene Coking. Pet. Chem. 59, 186–191 (2019). https://doi.org/10.1134/S0965544119020051
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0965544119020051