Abstract
Test flux-cored wires for arc spraying technology are developed. Tantalum and tungsten powders are selected as modifying additives. A PGSR-4 (Ni–Cr–B–Si) commercial powder is the basis of the powder material. The structure of the modified coatings is studied by metallographic analysis. Wear tests of the modified coatings are performed by slip** friction. The friction coefficients and the roughness characteristics are measured.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1134%2FS0036029519130391/MediaObjects/11505_2019_10338_Fig1_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1134%2FS0036029519130391/MediaObjects/11505_2019_10338_Fig2_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1134%2FS0036029519130391/MediaObjects/11505_2019_10338_Fig3_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1134%2FS0036029519130391/MediaObjects/11505_2019_10338_Fig4_HTML.gif)
Similar content being viewed by others
REFERENCES
V. N. Boronenkov and Yu. S. Korobov, Principles of Arch Metallization. Physical-Chemical Regularities (Ural. Gos. Univ., Yekaterinburg, 2012).
V. E. Arkhipov, Gas-Dynamic Spraying. The Structure and Properties of Coatings (Krasand, Moscow, 2017).
V. N. Gadalov, Metallography of Metals, Powder Materials, and Coatings Applied by Electro Spark Methods (INFRA-M, Moscow, 2011).
A. A. Usol’tsev, N. V. Kibko, N. A. Kozyrev, L. P. Bashchenko, and A. I. Gusev, “Investigation of the quality of metal deposited by flux-cored Fe–C–Si–Mn–Cr–Ni–Mo wires,” Vestn. Sib. Gos. Ind. Univ. 23 (1), 4–9 (2018).
E. V. Kapralov, S. V. Raykov, E. A. Budovskikh, V. E. Gromov, E. S. Vaschuk, and Yu. F. Ivanov, “Structural-phase states and properties of coatings welded onto steel surfaces using powder wires,” Izv. Ross. Akad. Nauk, Ser. Fiz. 78 (10) 1226–1272 (2014).
O. N. Fomina, Powder Metallurgy. Encyclopedia of International Standards, 2nd ed. (Protector, Moscow, 2015).
Yu. V. Levinskii and M. P. Lebedev, Theoretical Foundations of Sintering Processes of Metal Powders (Nauchnyi Mir, Moscow, 2014).
V. L. Popov, Mechanics of Contact Interaction and Friction Physics. From Nanotribology to Earthquake Dynamics (Fiziko-Matematicheskaya Literatura, Moscow, 2013).
A. Kh. Dzhanakhmedov, Sinergetics and Fractals in Tribology (Apostroff, Baku, 2014).
V. S. Kombalov, Effect of the Roughness of Solids on the Friction and Wear (Nauka, Moscow, 1974).
ACKNOWLEDGMENTS
We thank N.F. Struchkov for his help in preparing this manuscript.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by T. Gapontseva
Rights and permissions
About this article
Cite this article
Vinokurov, G.G., Vasil’eva, M.I., Kychkin, A.K. et al. Structure and Tribological Properties of the Wear-Resistant Coatings Deposited Using Flux-Cored Wires Modified by Tantalum and Tungsten. Russ. Metall. 2019, 1357–1362 (2019). https://doi.org/10.1134/S0036029519130391
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029519130391