Abstract
The microstructure evolution and precipitation behavior of Al-Mg-Si alloy during initial aging were studied using hardness testing, conductivity testing, differential scanning calorimetry (DSC), and high resolution transmission electron microscopy (HRTEM). The results show that the precipitation sequence of the Al-Mg-Si alloy during initial aging can be represented as: supersaturated solid solution → spherical Mg/Si clusters → needle-like Guinier Preston (GP) zone → β″. Clusters are completely coherent with the Al matrix. The GP zone with relatively complete independent lattice parameters that differ slightly from the Al matrix parameters, is oriented along the direction of <111>Al and lying on {111}Al plane. The strength of the Al-Mg-Si alloy is greatly enhanced by the three-dimensional strain field that exists between the β″ phase and the two {200}Al planes. After aging at 170 °C for 6 h, the hardness reaches the peak of 127 HV and remains for a long time. At this stage, the electrical conductivity keeps relatively stable due to the formation of coherent precipitates (Mg/Si clusters/GP zones) and the reduction in solute atom concentration in the Al matrix. The severe coarsening and decreased number density of the β″ phase during the over-aging stage result in a significant decrease in the hardness.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Wang D T, Zhang X Z, Xu S S, et al. Improvement of mechanical properties in micro-alloying Al-Si-Mg-Zn cast alloy. Materials Letters, 2021, 283(15): 128810.
Meng F B, Huang H J, Yuan X G, et al. Segregation in squeeze casting 6061 aluminum alloy wheel spokes and its formation mechanism. China Foundry, 2021, 18(1): 45–51.
Chen B, Zhang C H, ** Y. First-principles calculation of interface binding strength and fracture performance of β′/Al interface in Al-Mg-Si-Cu alloy. Journal of Alloys & Compounds, 2020, 830: 154515.
Lai Y X, Fan W, Yin M J, et al. Structures and formation mechanisms of dislocation-induced precipitates in relation to the age-hardening responses of Al-Mg-Si alloys. Journal of Materials Science & Technology, 2020, 41: 127–138.
Zhu S Q, Shi H C, Cui X Y, et al. Design of solute clustering during thermomechanical processing of AA6016 Al-Mg-Si alloy. Acta Materialia, 2021, 203: 1359–6454.
Gupta A K, Lloyd D J, Court S A. Precipitation hardening processes in an Al-0.4%Mg-1.3%Si-0.25%Fe aluminum alloy. Materials Science & Engineering A, 2001, 301(2): 140–146.
Zhen L, Kang S B. DSC analyses of the precipitation behavior of two Al-Mg-Si alloys naturally aged for different times. Materials Letters, 1998, 37(6): 349–353.
Aluru P S, Ashim B M, Debdulal D. Mechanical properties and corrosion behavior of artificially aged Al-Mg-Si alloy. Journal of Materials Research and Technology, 2020, 9(1): 1005–1024.
Aruga Y, Kozuka M, Takaki Y, et al. Formation and reversion of clusters during natural aging and subsequent artificial aging in an Al-Mg-Si alloy. Materials Science & Engineering A, 2015, 631(17): 86–96.
Liu M, Banhart J. Effect of Cu and Ge on solute clustering in Al-Mg-Si alloys. Materials Science & Engineering A, 2016, 658(21): 238–245.
Kumar N, Jayaganthan R, Brokmeier H G. Effect of deformation temperature on precipitation, microstructural evolution, mechanical and corrosion behavior of 6082 Al alloy. Transactions of Nonferrous Metals Society of China, 2017, 27(3): 475–492.
Murayama M, Hono K, Saga M, et al. Atom probe studies on the early stages of precipitation in Al-Mg-Si alloys. Materials Science & Engineering A, 1998, 250(1): 127–132.
Mørtsell E V A, Marioara C D, Andersen S J, et al. Effects of germanium, copper, and silver substitutions on hardness and microstructure in lean Al-Mg-Si alloys. Metallurgical & Materials Transactions A, 2015, 46(6): 4369–4379.
Deng L, Zhang X M, Tang J F, et al. First-principles study of the binding preferences and diffusion behaviors of solutes in vanadium alloys. Journal of Alloys & Compounds, 2016, 660(5): 55–61.
Messina L, Malerba L, Olsson P. Stability and mobility of small vacancy-solute complexes in Fe-MnNi and dilute Fe-X alloys: A kinetic Monte Carlo study. Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, 2015, 352(1): 61–66.
Li H, Wang J Y, Jiang H T. et al. Characterizations of precipitation behavior of Al-Mg-Si alloys under different heat treatments. China Foundry, 2018, 15(2): 89–96.
Kim J, Hayashi M, Kobayashi E, et al. Influence of Si addition on quenching sensitivity and formation of nano-precipitate in Al-Mg-Si alloys. Journal of Nanoscience & Nanotechnology, 2016, 16(2): 1814–1817.
Du J L, Zhang A, Zhang Y B, et al. Atomistic determination on stability, cluster and microstructures in terms of crystallographic and thermo-kinetic integration of Al-Mg-Si alloys. Materials Today Communications, 2020, 24: 101220.
Ding L P, Jia Z H, Nie J F, et al. The structural and compositional evolution of precipitates in Al-Mg-Si-Cu alloy. Acta Materialia, 2018, 145: 437–450.
Weng Y Y, Ding L P, Zhang Z H, et al. Effect of Ag addition on the precipitation evolution and interfacial segregation for Al-Mg-Si alloy. Acta Materialia, 2019, 180: 301–316.
Edwards G A, Stiller K, Dunlop G L, et al. The precipitation sequence in Al-Mg-Si alloys. Acta Materialia, 1998, 46(11): 3893–3904.
Dutta I, Allen S M, Hafley J L. Effect of reinforcement on the aging response of cast 6061 Al-Al2O3 particulate composites. Metallurgical & Materials Transactions A, 1991, 22: 2553–2563.
Yang W, Wang M, Jia Y. et al. Studies of orientations of β″ Precipitates in Al-Mg-Si-(Cu) alloys by electron diffraction and transition matrix analysis. Metallurgical & Materials Transactions A, 2011, 42: 2917–2929.
** M, Li J, Shao G J. The effects of Cu addition on the microstructure and thermal stability of an Al-Mg-Si alloy. Journal of Alloys & Compounds, 2007, 437(1–2): 146–150.
Yang Z, Jiang X H, Zhang X P, et al. Natural ageing clustering under different quenching conditions in an Al-Mg-Si alloy. Scripta Materialia, 2021, 190: 179–182.
Hesam P, Mohammad R J, Gholamreza K. Constrained groove pressing and subsequent annealing of Al-Mn-Si alloy: Microstructure evolutions, crystallographic transformations, mechanical properties, electrical conductivity and corrosion resistance. Corrosion Science, 2017, 124: 34–46.
Liu T, Yin Y S, Chen S G, et al. Super-hydrophobic surfaces improve corrosion resistance of copper in seawater. Electrochimica Acta, 2007, 52: 3709–3713.
Acknowledgement
The work was financially supported by the Research Foundation of Education Bureau Hunan Province, China (Grant No. 22C0598).
Author information
Authors and Affiliations
Corresponding author
Additional information
Conflict of interest
The authors declare that they have no conflict of interest.
Ya-ya Zheng Male, born in 1990, Ph. D. His research interests mainly focus on the microstructures and comprehensive properties of Al alloys.
Rights and permissions
About this article
Cite this article
Zheng, Yy., Luo, Bh., **e, W. et al. Microstructure evolution and precipitation behavior of Al-Mg-Si alloy during initial aging. China Foundry 20, 57–62 (2023). https://doi.org/10.1007/s41230-023-1113-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s41230-023-1113-y