Abstract
In this paper, an efficient Bayesian-Emulator approach is developed and applied to identify unknown input parameters for detailed energy models for existing buildings. The new approach improves on the traditional Bayesian approach for parameter identification, characterized by high computing requirements. Specifically, the developed approach utilizes a building energy model emulator to expedite the parameter identification process. Both discrete and continuous building energy model parameters can be identified using the developed Bayesian-Emulator approach. In the paper, the benefits of the developed Bayesian-Emulator parameter identification approach to calibrate whole-building energy models are discussed. Moreover, the proposed approach has been applied to a case study of an existing medium office building using monthly utility data. It is found that the Bayesian-Emulator is capable to calibrate the medium office building energy model in less than 1 minute using a personal computer. The Bayesian-Emulator approach presented in this paper can be an effective framework to automatically calibrate energy models for existing buildings.
Similar content being viewed by others
References
ASHRAE (2002), ASHRAE, Guideline 14-2002: Measurement of Energy and Demand Savings. Atlanta: ASHRAE.
Boujelben AH (2012). Develo** probabilistic and optimized approaches to calibrate residential building energy models based on measured data. Tunisia Polytechnic School.
Caldas LG, Norford LK (2003). Genetic algorithms for optimization of building envelopes and the design and control of HVAC systems. Journal of Solar Energy Engineering, 125: 343–351.
DOE (2014). Office of Energy Efficiency & Renewable Energy. Commercial Reference Buildings. Office of Energy Efficiency & Renewable Energy. U.S. Department of Energy. Available at http://energy.gov/eere/buildings/commercial-reference-buildings. Accessed Oct 2014.
Ekici BB, Aksoy UT (2009). Prediction of building energy consumption by using artificial neural networks. Advances in Engineering Software, 40: 356–362.
eQUEST (2013). eQUEST—The quick energy simulation tool: An overview. Available at http://www.doe2.com/download/equest eQUESTv3-Overview.pdf.
Eisenhower B, O’Neill Z, Fonoberov VA, Igor Mezic I (2012). Uncertainty and sensitivity decomposition of building energy models. Journal of Building Performance Simulation, 5: 171–184.
Heo Y, Augenbroe G, Choudhary R (2011). Risk analysis of energyefficiency projects based on Bayesian calibration of building energy models. In: Proceedings of 12th International IBPSA Building Simulation Conference, Sydney, Australia, pp. 2579–2586.
Higdon D, Kennedy M, Cavendish JC, Cafeo JA, Ryne RD (2004). Combining field data and computer simulations for calibration and prediction. SIAM Journal on Scientific Computing, 26: 448–466.
Hopfield JJ (1982). Neural networks and physical systems with emergent collective computational abilities. Proceedings of the National Academy of Sciences of the United States of America, PNAS, 79: 2554–2558.
Jensen KL, Toftum J, Friis-Hansen P (2009). A Bayesian Network approach to the evaluation of building design and its consequences for employee performance and operational costs. Building and Environment, 44: 456–462.
Kennedy MC, O’Hagan A (2001). Bayesian calibration of computer models. Journal of the Royal Statistical Society: Series B, 63: 425–464.
Kennedy J, Eberhart R (1995). Particle swarm optimization. In: Proceedings of IEEE International Conference on Neural Networks, Perth, WA, USA, pp.1942–1948.
Krarti M (2010). Energy Audit of Building Systems: An Engineering Approach, 2nd edn. Boca Raton, FL, USA: CRC Press.
Kusiak A, Xu G (2012). Modeling and optimization of HVAC systems using a dynamic neural network. Energy, 42: 241–250.
Li X, Shao M, Ding L, Xu G, Li J (2010). Particle swarm optimizationbased LS-SVM for building cooling load prediction. Journal of Computers, 5: 614–621.
Liu L, Liu W, Cartes DA (2008). Particle swarm optimization-based parameter identification applied to permanent magnet synchronous motors. Engineering Applications of Artificial Intelligence, 21: 1092–1100.
Matsumoto T, Saito M, Nakajima Y, Sugi J, Hamagishi H (1999). Reconstruction and prediction of nonlinear dynamical systems: A hierarchical Bayes approach with neural nets. In: Proceedings of IEEE International Conference on Acoustics, Speech, and Signal Processing, Phoenix, AZ, USA, pp. 1061–1064.
Mechaqrane A, Zouak M (2004). A comparison of linear and neural network ARX models applied to a prediction of the indoor temperature of a building. Neural Computing & Applications, 13: 32–37.
Metropolis N, Rosenbluth AW, Rosenbluth MN, Teller AH, Teller E (1953). Equations of state calculations by fast computing machines. Journal of Chemical Physics, 21: 1087–1092.
Najafi M, Auslander DM, Bartlett PL, Haves P, Sohn MD (2010). Modeling and measurement constraints in fault diagnostics for HVAC systems. Lawrence Berkeley National Laboratory, Report No. LBNL-3903E.
Najafi M, Auslander DM, Bartlett PL, Haves P, Sohn MD (2012). Application of machine learning in the fault diagnostics of air handling units. Applied Energy, 96: 347–358.
Pavlak GS (2014). Building-to-grid integration through commercial building portfolios participating in energy and frequency regulation markets. PhD Thesis, University of Colorado at Boulder, USA.
Rasmussen CE, William CKI (2006). Gaussian Processes for Machine Learning, 2nd edn. Cambridge, MA, USA: MIT Press.
Rasmussen CE, Nickisch H (2010). Gaussian processes for machine learning (GPML) toolbox. Journal of Machine Learning Research, 11: 3011–3015.
Sanyal J, New J, Edwards RE, Parker L (2014). Calibrating building energy models using supercomputer trained machine learning agents. Concurrency and Computation: Practice and Experience, 26: 2122–2133.
Tarlow D, Peterman A, Schwegler BR, Trigg C (2009). Automatically calibrating a probabilistic graphical model of building energy consumption. In: Proceedings of 11th International IBPSA Building Simulation Conference, Glasgow, UK, pp. 904–911.
Wang S, ** S (2000). Model-based optimal control of VAV air-conditioning system using genetic algorithm. Building and Environment, 35: 471–487.
Whitley D (1994). A genetic algorithm tutorial. Statistics and Computing, 4: 65–85.
Zhang T, Wang Y, Ye A, Wang J, Zeng J (2009). A new research of identification strategy based on particle swarm optimization and least square. Frontiers of Electrical and Electronic Engineering in China, 4: 313–317.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kang, Y., Krarti, M. Bayesian-Emulator based parameter identification for calibrating energy models for existing buildings. Build. Simul. 9, 411–428 (2016). https://doi.org/10.1007/s12273-016-0291-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12273-016-0291-6