Abstract
In this study, chromium plating was conducted using a deep eutectic solvent ionic liquid mixture of choline chloride, ethylene glycol, and hydrated trivalent chromium salt, containing varying amounts of added water (i.e., 3, 6, 9, and 12 mol). Physicochemical analysis showed that the addition of water improved the conductivity and reduced the viscosity of the ionic liquid bath. Cyclic and linear scan voltammetry revealed that chromium deposition involves a two-step reduction for the Cr+3 ion. The plating system’s cathode efficiency initially increased with water content, reaching a maximum of about 45% in the bath containing 6 mol of added water. Beyond this water addition, cathode efficiency subsequently declined. A black chromium deposit with a nodular microstructure was observed. The best deposit was also derived at the bath with an additional 6 mol of water. The chromium coatings possessed an average microhardness of ca. 580 HV, which approximates the properties of industrial hard chrome.
Graphic abstract
Similar content being viewed by others
References
Abbott AP, McKenzie KJ (2006) Application of ionic liquids to the electrodeposition of metals. Phys Chem Chem Phys 8(37):4265–4279. https://doi.org/10.1039/B607329H
Abbott AP, Al-Barzinjy AA, Abbott PD, Frisch G, Harris RC, Hartley J, Ryder KS (2014) Speciation, physical and electrolytic properties of eutectic mixtures based on CrCl3·6H2O and urea. Phys Chem Chem Phys 16(19):9047. https://doi.org/10.1039/c4cp00057a
Abbott AP, Barron JC, Ryder KS, Wilson D (2007) Eutectic-based ionic liquids with metal-containing anions and cations. Chem Eur J 13(22):6495–6501. https://doi.org/10.1002/chem.200601738
Abbott AP, Boothby D, Capper G, Davies DL, Rasheed RK (2004a) Deep eutectic solvents formed between choline chloride and carboxylic acids: versatile alternatives to ionic liquids. J Am Chem Soc 126(29):9142–9147. https://doi.org/10.1021/ja048266j
Abbott AP, Capper G, Davis DL, Rasheed RK (2004) Ionic liquid analogues formed from hydrated metal salts. Chem Eur J 10:3769–3774
Abbott AP, Endres F, Macfarlane DR (2017) Why use ionic liquids for electrodeposition? In: Endres F, Abbott A, MacFarlane D (eds) Electrodeposition from ionic liquids. Wiley-VCH Verlag GmbH & Co., Weinheim, pp 1–15
Abbott AP, Harris RC, Ryder KS (2007) Application of hole theory to define ionic liquids by their transport properties. J Phys Chem B 111(18):4910–4913. https://doi.org/10.1021/jp0671998
Abbott AP, Ryder KS, König U (2008) Electrofinishing of metals using eutectic based ionic liquids. Trans IMF 86(4):196–204. https://doi.org/10.1179/174591908x327590
Al-Murshedi AYM, Al-Yasari A, Alesary HF, Ismail HK (2020) Electrochemical fabrication of cobalt films in a choline chloride–ethylene glycol deep eutectic solvent containing water. Chem Pap 74(2):699–709. https://doi.org/10.1007/s11696-019-01025-z
ASTM (2017) E384 - 17 Standard test method for microindentation hardness of materials. vol E384 - 17. ASTM International West Conshohocken, PA, USA
Bakkar A, Neubert V (2007) Electrodeposition onto magnesium in air and water stable ionic liquids: from corrosion to successful plating. Electrochem Commun 9:2428–2435. https://doi.org/10.1016/j.elecom.2007.07.010
Chiappe C, Pieraccini D (2005) Ionic liquids: solvent properties and organic reactivity. J Phys Org Chem 18(4):275–297. https://doi.org/10.1002/poc.863
Dennis JK, Such TE (1993) Chapter 8–chromium plating. In: Dennis JK, Such TE (eds) Nickel and chromium plating, 3rd edn. Elsevier, Woodhead Publishing, pp 205–244
DesMarias TL, Costa M (2019) Mechanisms of chromium-induced toxicity. Curr Opin Toxicol 14:1–7. https://doi.org/10.1016/j.cotox.2019.05.003
El-Hallag IS, Moharram YI, Darweesh MA, Tartour AR (2020) Factors affecting nucleation and growth of chromium electrodeposited from Cr3+ electrolytes based on deep eutectic solvents. J Electrochem Sci Technol 11(3):291–309
Elving PJ, Zemel B (1957) Absorption in the ultraviolet and visible regions of chloroaquochromium(III) ions in acid media. J Am Chem Soc 79(6):1281–1285. https://doi.org/10.1021/ja01563a006
Eugénio S, Rangel CM, Vilar R, Botelho do Rego AM, (2011) Electrodeposition of black chromium spectrally selective coatings from a Cr(III)–ionic liquid solution. Thin Solid Films 519(6):1845–1850. https://doi.org/10.1016/j.tsf.2010.10.029
Ferreira ESC, Pereira CM, Silva AF (2013) Electrochemical studies of metallic chromium electrodeposition from a Cr(III) bath. J Electroanal Chem 707:52–58. https://doi.org/10.1016/j.jelechem.2013.08.005
Gardner A (2008) Meeting high performance decorative chromium plating specifications using trivalent chrome plating systems. SAE Technical Paper 2008–01–1459. DOI:https://doi.org/10.4271/2008-01-1459
He X, Zhu Q, Hou B, Li C, Jiang Y, Zhang C, Wu L (2015) Electrodeposition of nanocrystalline chromium coatings from 1-butyl-3-methylimidazolium-hydrogen sulfate ionic liquid. Surf Coat Technol 262:148–153. https://doi.org/10.1016/j.surfcoat.2014.12.034
Irge DD (2016) Ionic liquids: a review on greener chemistry applications, quality ionic liquid synthesis and economical viability in a chemical processes. Am J Phys Chem 5(3):74–79
Kan H-m, Wang Z-w, Wang X-y, Zhang N (2010) Electrochemical deposition of aluminum on W electrode from AlCl3–NaCl melts. Trans Nonferrous Met Soc China 20(1):158–164. https://doi.org/10.1016/S1003-6326(09)60114-X
Kaur S, Malik A, Kashyap HK (2019) Anatomy of microscopic structure of ethaline deep eutectic solvent decoded through molecular dynamics simulations. J Phys Chem B 123(39):8291–8299. https://doi.org/10.1021/acs.jpcb.9b06624
Kopczyński K, Lota G (2020) Ni–La composite coating obtained using deep eutectic solvent and its electrocatalytic activity. Chem Pap 74(5):1691–1696. https://doi.org/10.1007/s11696-019-00993-6
Maiti A, Kumar A, Rogers RD (2012) Water-clustering in hygroscopic ionic liquids—An implicit solvent analysis. Phys Chem Chem Phys 14(15):5139–5146. https://doi.org/10.1039/C2CP00010E
Mandich NV, Snyder DL (2010) Electrodeposition of chromium. In: Schlesinger M, Paunovic M (eds) Modern electroplating. Wiley, Hoboken, N.J., pp 205–241
McCalman DC, Sun L, Zhang Y, Brennecke JF, Maginn EJ, Schneider WF (2015) Speciation, conductivities, diffusivities, and electrochemical reduction as a function of water content in mixtures of hydrated chromium chloride/choline chloride. J Phys Chem B 119(19):6018–6023. https://doi.org/10.1021/acs.jpcb.5b01986
Mejía-Caballero I, Aldana-González J, Manh TL, Romero-Romo M, Arce-Estrada EM, Campos-Silva I, Ramírez-Silva MT, Palomar-Pardavé M (2018) Mechanism and kinetics of chromium electrochemical nucleation and growth from a choline chloride/ethylene glycol deep eutectic solvent. J Electrochem Soc 165(9):D393–D401. https://doi.org/10.1149/2.0851809jes
Pettit RB, Sowell RR, Hall IJ (1982) Black chrome solar selective coatings optimized for high temperature applications. Solar Energy Materials 7(2):153–170. https://doi.org/10.1016/0165-1633(82)90081-8
Protsenko VS, Danilov FI (2014) Chromium electroplating from trivalent chromium baths as an environmentally friendly alternative to hazardous hexavalent chromium baths: comparative study on advantages and disadvantages. Clean Technol Environ Policy 16(6):1201–1206. https://doi.org/10.1007/s10098-014-0711-1
Protsenko VS, Bobrova LS, Danilov FI (2016) Physicochemical properties of ionic liquid mixtures containing choline chloride, chromium (III) chloride and water: effects of temperature and water content. Ionics 23(3):637–643. https://doi.org/10.1007/s11581-016-1826-7
Protsenko VS, Bobrova LS, Danilov FI (2016) Effects of temperature and water content on physicochemical properties of ionic liquids containing CrCl3·xH2O and choline chloride. J Mol Liq 223:48–53
Protsenko VS, Bobrova LS, Baskevich AS, Korniy SA, Danilov FI (2018) Electrodeposition of chromium coatings from a choline chloride based ionic liquid with the addition of water. J Chem Technol Metall 53:906–915
Protsenko VS, Gordiienko VO, Danilov FI, Kwon SC, Kim M, Lee JY (2011) Unusually high current efficiency of nanocrystalline Cr electrodeposition process from trivalent chromium bath. Surf Eng 27(9):690–692. https://doi.org/10.1179/1743294410Y.0000000019
Singh SK, Savoy AW (2020) Ionic liquids synthesis and applications: an overview. J Mol Liq 297:112038. https://doi.org/10.1016/j.molliq.2019.112038
Smith EL, Abbott AP, Ryder KS (2014) Deep eutectic solvents (dess) and their applications. Chem Rev 114(21):11060–11082. https://doi.org/10.1021/cr300162p
Smith EL, Fullarton C, Harris RC, Saleem S, Abbott AP, Ryder KS (2010) Metal finishing with ionic liquids: scale-up and pilot plants from IONMET consortium. Transactions of the IMF 88(6):285–293. https://doi.org/10.1179/174591910X12856686485734
Soltanmohammadi F, Jouyban A, Shayanfar A (2021) New aspects of deep eutectic solvents: extraction, pharmaceutical applications, as catalyst and gas capture. Chem Pap 75(2):439–453. https://doi.org/10.1007/s11696-020-01316-w
Surviliene S, Eugenio S, Vilar R (2011) Chromium electrodeposition from [BMIm] [BF4] ionic liquid. J Appl Electrochem 41(1):107–114
Tomaszewski TW, Creutz H-G, Clauss RJ (1980) Trivalent chromium plating bath: composition and process US Patent Number US4184929A United States Patent,
Zein El Abedin S, Endres F (2007) Ionic liquids: the link to high-temperature molten salts? Acc Chem Res 40(11):1106–1113. https://doi.org/10.1021/ar700049w
Zein El Abedin S, Saad AY, Farag HK, Borisenko N, Liu QX, Endres F (2007) Electrodeposition of selenium, indium and copper in an air- and water-stable ionic liquid at variable temperatures. Electrochim Acta 52(8):2746–2754. https://doi.org/10.1016/j.electacta.2006.08.064
Acknowledgements
The authors would like to acknowledge the Philippine Council for Industry, Energy, and Emerging Technology Research and Development (PCIEERD) of the Department of Science and Technology (DOST) funded project entitled “Establishing an Environment-Friendly Chromium Plating Process using New Generation Ionic liquids” and the Science Education Institute – DOST.
Funding
The authors would like to acknowledge the Philippine Council for Industry, Energy, and Emerging Technology Research and Development (PCIEERD) of the Department of Science and Technology (DOST) funded project entitled “Establishing an Environment-Friendly Chromium Plating Process using New Generation Ionic liquids” and the Science Education Institute – DOST.
Author information
Authors and Affiliations
Contributions
GRN contributed to conceptualization, conduct of experiments, data analysis, and paper writing. EMDP contributed to conceptualization, data analysis, paper writing, and editing.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that there is no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Nablo, G.R., Dela Pena, E.M. A black chrome plating process using trivalent chromium and water-tolerant, ethaline-based ionic liquid baths. Chem. Pap. 75, 4887–4897 (2021). https://doi.org/10.1007/s11696-021-01716-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11696-021-01716-6