Log in

Study on the behavior of heavy metals during thermal treatment of municipal solid waste (MSW) components

  • Research Article
  • Published:
Environmental Science and Pollution Research Aims and scope Submit manuscript

Abstract

Laboratory experiments were conducted to investigate the volatilization behavior of heavy metals during pyrolysis and combustion of municipal solid waste (MSW) components at different heating rates and temperatures. The waste fractions comprised waste paper (Paper), disposable chopstick (DC), garbage bag (GB), PVC plastic (PVC), and waste tire (Tire). Generally, the release trend of heavy metals from all MSW fractions in rapid-heating combustion was superior to that in low-heating combustion. Due to the different characteristics of MSW fractions, the behavior of heavy metals varied. Cd exhibited higher volatility than the rest of heavy metals. For Paper, DC, and PVC, the vaporization of Cd can reach as high as 75 % at 500 °C in the rapid-heating combustion due to violent combustion, whereas a gradual increase was observed for Tire and GB. Zn and Pb showed a moderate volatilization in rapid-heating combustion, but their volatilities were depressed in slow-heating combustion. During thermal treatment, the additives such as kaolin and calcium can react or adsorb Pb and Zn forming stable metal compounds, thus decreasing their volatilities. The formation of stable compounds can be strengthened in slow-heating combustion. The volatility of Cu was comparatively low in both high and slow-heating combustion partially due to the existence of Al, Si, or Fe in residuals. Generally, in the reducing atmosphere, the volatility of Cd, Pb, and Zn was accelerated for Paper, DC, GB, and Tire due to the formation of elemental metal vapor. TG analysis also showed the reduction of metal oxides by chars forming elemental metal vapor. Cu2S was the dominant Cu species in reducing atmosphere below 900 °C, which was responsible for the low volatility of Cu. The addition of PVC in wastes may enhance the release of heavy metals, while GB and Tire may play an opposite effect. In controlling heavy metal emission, aluminosilicate- and calcium-based sorbents can be co-treated with fuels. Moreover, pyrolysis can be a better choice for treatment of solid waster in terms of controlling heavy metals. PVC and Tire should be separated and treated individually due to high possibility of heavy metal emission. This information may then serve as a guideline for the design of the subsequent gas cleaning plant, necessary to reduce the final emissions to the atmosphere to an acceptable level.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price includes VAT (Germany)

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  • Belevi H, Langmeier M (2000) Factors determining the element behavior in municipal solid waste incinerators. 2. Laboratory experiments. Environ Sci Technol 34:2507–2512

    Article  CAS  Google Scholar 

  • Bernard J, Ole H, Jürgen V (2000) The influence of PVC on the quantity and hazardousness of flue gas residues from incineration. Final Report, Bertin Technologies

    Google Scholar 

  • Chiang KY, Wang KS, Lin FL, Chu WT (1997) Chloride effects on the speciation and partitioning of heavy metal during the municipal solid waste incineration process. Sci Total Environ 203:129–140

    Article  CAS  Google Scholar 

  • Chiang KY, Wang KS, Tsai CC, Sun CJ (2001) Formation of heavy metal species during PVC-containing simulated MSW incineration. J Environ Sci Health Part A 36:833–844

    Article  CAS  Google Scholar 

  • Diaz-Somoano M, Martínez-Tarazona MR (2005) Retention of zinc compounds in solid sorbents during hot gas cleaning processes. Energy Fuels 19:442–446

    Article  CAS  Google Scholar 

  • East Asia and Pacific Urban Development Sector Unit (EASUR) (2005) Waste management in China: issues and recommendations. East Asia Infrasture Department, World Bank, Washington D.C

    Google Scholar 

  • Gale TK, Wendt JOL (2005) In-furnace capture of cadmium and other semi-volatile metals by sorbents. P Combust Inst 30:2999–3007

    Article  CAS  Google Scholar 

  • Ho TC, Chen C, Hopper JR, Oberacker DA (1992) Metal capture during fluidized bed incineration of wastes contaminated with lead chloride. Combust Sci Technol 85:101–116

    Article  CAS  Google Scholar 

  • Kistler RC, Widmer F, Brunner PH (1987) Behavior of chromium, nickel, copper, zinc, cadmium, mercury, and lead during the pyrolysis of sewage sludge. Environ Sci Technol 21:704–708

    Article  CAS  Google Scholar 

  • Lachas H, Herod AA, Reed GP, Dugwell DR, Kandiyoti R (2003) Trace element removal from hot gases: screening sorbents for performance and product leachability. Energy Fuels 17:521–531

    Article  CAS  Google Scholar 

  • Linak WP, Wendt JOL (1993) Toxic metal emissions from incineration: mechanisms and control. Prog Energ Combust Sci 19:145–185

    Article  CAS  Google Scholar 

  • Lu S, Du Y, Zhong D, Zhao B, Li X, Xu M, Li Z, Luo Y, Yan J, Wu L (2012) Comparison of trace element emissions from thermal treatments of heavy metal hyperaccumulators. Environ Sci Technol 46:5025–5031

    Article  CAS  Google Scholar 

  • Masseron R, Gadiou R, Delfosse L (1999) Study of the adsorption of CdCl2 vapor on various minerals using a drop tube furnace. Environ Sci Technol 33:3634–3640

    Article  CAS  Google Scholar 

  • Miller B, Dugwell D, Kandiyoti R (2006) The fate of trace elements during the co-combustion of wood-bark with waste. Energy Fuels 20:520–531

    Article  CAS  Google Scholar 

  • Miller B, Dugwell DR, Kandiyoti R (2003) The influence of injected HCl and SO2 on the behavior of trace elements during wood-bark combustion. Energy Fuels 17:1382–1391

    Article  CAS  Google Scholar 

  • Miller BB, Kandiyoti R, Dugwell DR (2002) Trace element emissions from co-combustion of secondary fuels with coal: a comparison of bench-scale experimental data with predictions of a thermodynamic equilibrium model. Energy Fuels 16:956–963

    Article  CAS  Google Scholar 

  • Monte MC, Fuente E, Blanco A, Negro C (2009) Waste management from pulp and paper production in the European Union. Waste Manage 29:293–308

    Article  CAS  Google Scholar 

  • National Bureau of Statistics, 2012. China statistical yearbook 2012. China Statistical Press

  • Pedersen AJ, van Lith SC, Frandsen FJ, Steinsen SD, Holgersen LB (2010) Release to the gas phase of metals, S and Cl during combustion of dedicated waste fractions. Fuel Process Technol 91:1062–1072

    Article  CAS  Google Scholar 

  • Prasad V, Shaikh AJ, Kathe AA, Bisoyi DK, Verma AK, Vigneshwaran N (2010) Functional behaviour of paper coated with zinc oxide–soluble starch nanocomposites. J Mater Process Manu 210:1962–1967

    Article  CAS  Google Scholar 

  • Sørum L, Frandsen FJ, Hustad JE (2003) On the fate of heavy metals in municipal solid waste combustion part I: devolatilisation of heavy metals on the grate. Fuel 82:2273–2283

    Article  CAS  Google Scholar 

  • Sekine Y, Sakajiri K, Kikuchi E, Matsukata M (2008) Release behavior of trace elements from coal during high-temperature processing. Powder Technol 180:210–215

    Article  CAS  Google Scholar 

  • Shi DZ, Wu WX, Lu SY, Chen T, Huang HL, Chen YX, Yan JH (2008) Effect of MSW source-classified collection on the emission of PCDDs/Fs and heavy metals from incineration in China. J Hazard Mater 153:685–694

    Article  CAS  Google Scholar 

  • Tai J, Zhang W, Che Y, Feng D (2011) Municipal solid waste source-separated collection in China: a comparative analysis. Waste Manage 31:1673–1682

    Article  Google Scholar 

  • Owens TM, Wu C-Y, Biswas P (1995) An equilibrium analysis for reaction of metal compounds with sorbents in high temperature systems. Chem Eng Commun 133:31–52

    Article  CAS  Google Scholar 

  • Tran QK, Steenari B-M, Iisa K, Lindqvist O (2004) Capture of potassium and cadmium by kaolin in oxidizing and reducing atmospheres. Energy Fuels 18:1870–1876

    Article  CAS  Google Scholar 

  • Uberoi M, Shadman F (1990) Sorbents for removal of lead compounds from hot flue gases. AIChE J 36:307–309

    Article  CAS  Google Scholar 

  • Uberoi M, Shadman F (1991) High-temperature removal of cadmium compounds using solid sorbents. Environ Sci Technol 25:1285–1289

    Article  CAS  Google Scholar 

  • U.S. Environmental Portection Agency (1996) Method 3052: microwave assisted acid digestion of siliceous and organically based matrices. Office of Air Quality Planning and Standards, Washington D.C.

    Google Scholar 

  • Wang HZ, Xu H, Xuan XJ (2009) Review of waste tire reuse & recycling in China—current situation, problems and countermeasures. Adv Nat Sci 2:31–39

    CAS  Google Scholar 

  • Wang KS, Chiang KY, Lin SM, Tsai CC, Sun CJ (1999) Effects of chlorides on emissions of hydrogen chloride formation in waste incineration. Chemosphere 38:1571–1582

    Article  CAS  Google Scholar 

  • Wei M-C, Wey M-Y, Lin C-L (2003) The competitive adsorption of heavy metals under various incineration conditions. J Chem Eng Jpn 36:243–249

    Article  CAS  Google Scholar 

  • Wendt JOL, Lee SJ (2010) High-temperature sorbents for Hg, Cd, Pb, and other trace metals: mechanisms and applications. Fuel 89:894–903

    Article  CAS  Google Scholar 

  • Wikipedia, 2014 Wikipedia, 2014. Chopsticks. <http://en.wikipedia.org/wiki/ Chopsticks>.

  • Wu CH, Chang CY, Hor JL, Shih SM, Chen LW, Chang FW (1994) Two-stage pyrolysis model of PVC. Can J Chem Eng 72:644–650

    Article  CAS  Google Scholar 

  • Yang YB, Goh YR, Zakaria R, Nasserzadeh V, Swithenbank J (2002) Mathematical modelling of MSW incineration on a travelling bed. Waste Manage 22:369–380

    Article  CAS  Google Scholar 

  • Yao H, Mkilaha ISN, Naruse I (2004) Screening of sorbents and capture of lead and cadmium compounds during sewage sludge combustion. Fuel 83:1001–1007

    Article  CAS  Google Scholar 

  • Yu J, Sun L, **ang J, Hu S, Su S (2013) Kinetic vaporization of heavy metals during fluidized bed thermal treatment of municipal solid waste. Waste Manage 33:340–346

    Article  CAS  Google Scholar 

  • Yu J, Sun L, **ang J, Hu S, Su S, Qiu J (2012) Vaporization of heavy metals during thermal treatment of model solid waste in a fluidized bed incinerator. Chemosphere 86:1122–1126

    Article  CAS  Google Scholar 

  • Zhang DQ, Tan SK, Gersberg RM (2010) Municipal solid waste management in China: status, problems and challenges. J Environ Manage 91:1623–1633

    Article  CAS  Google Scholar 

  • Zhang F, Li R, An SL, Luo GP (2012) Thermodynamic behavior of zinc in blast furnace. J Inner Monolia Uni Sci Technol 31:213–217

    CAS  Google Scholar 

  • Zhang H, He PJ, Shao LM (2008a) Fate of heavy metals during municipal solid waste incineration in Shanghai. J Hazard Mater 15:365–373

    Article  CAS  Google Scholar 

  • Zhang, Q.J., 2003. Study on synthesis of complexes with ligands containing sulphur atoms and their applications in rubber as vulcanization accelerators. Master Thesis, South China Normal University (Guangzhou), China (In Chinese).

  • Zhang Y, Chen Y, Meng A, Li Q, Cheng H (2008b) Experimental and thermodynamic investigation on transfer of cadmium influenced by sulfur and chlorine during municipal solid waste (MSW) incineration. J Hazard Mater 153:309–319

    Article  CAS  Google Scholar 

  • Zhao Y, Lin WC (2001) High-temperature adsorption of lead compounds on solid sorbents. B Coll Eng 83:83–89

    CAS  Google Scholar 

  • Zheng L, Song J, Li C, Gao Y, Geng P, Qu B, Lin L (2014) Preferential policies promote municipal solid waste (MSW) to energy in China: current status and prospects. Renew Sust Energ Rev 36:135–148

    Article  Google Scholar 

  • Zhong D-X, Zhong Z-P, Wu L-H, Xue H, Song Z-W, Luo Y-M (2015) Thermal characteristics and fate of heavy metals during thermal treatment of Sedum plumbizincicola, a zinc and cadmium hyperaccumulator. Fuel Process Technol 131:125–132

    Article  CAS  Google Scholar 

Download references

Acknowledgments

This research was supported by the National Natural Science Foundation of China (No. 51576073, No. 51376073), the Independent Research Funds of SCLCC (No. FSKLCCB1503), and the Science and Technology Program of Wuhan (No. 2015070504020228). The authors thank the Analytical and Testing Center of HuaZhong University of Science and Technology for assisting with the analysis work.

Author information

Authors and Affiliations

Authors

Corresponding authors

Correspondence to Lushi Sun or Ben Wang.

Additional information

Responsible editor: Philippe Garrigues

Electronic supplementary material

Below is the link to the electronic supplementary material.

ESM 1

(DOC 261 kb)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Yu, J., Sun, L., Wang, B. et al. Study on the behavior of heavy metals during thermal treatment of municipal solid waste (MSW) components. Environ Sci Pollut Res 23, 253–265 (2016). https://doi.org/10.1007/s11356-015-5644-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11356-015-5644-7

Keywords

Navigation